Electrolux EW1025F User manual

Brand: Electrolux

Model: EW1025F

Category: Washing machines

Type: User manual

INFO

ISTRUZIONI PER L'INSTALLAZIONE E L'USO

INSTRUÇÕES PARA A INSTALAÇÃO E A UTILIZAÇÃO

INSTRUCTIONS FOR THE INSTALLATION AND USE

LAVATRICE EW 1025 F

MÁQUINA DE LAVAR ROUPA EW 1025 F

WASHING MACHINE EW 1025 F

CONTENTS

Warnings ..........................Page 29

Installation .........................Page 30

Unpacking..........................Page 30

Positioning..........................Page 30

Water inlet..........................Page 30

Water drainage ........................Page 31

Electrical connection .......................Page 31

Levelling ..........................Page 31

Use............................Page 32

Control panel .........................Page 32

Detergent dispenser drawer and programme card ..............Page 32

Symbols ..........................Page 32

Controls ..........................Page 32

Washing hints.........................Page 33

Detergents and additives .....................Page 34

Wash code symbols .......................Page 35

Washing programmes ......................Page 36-37

Operating sequence .......................Page 38

Maintenance .........................Page 39

Bodywork ..........................Page 39

Detergent dispenser drawer.....................Page 39

Drain filter ..........................Page 39

Water inlet filter ........................Page 39

Something not working? .....................Page 40

TECHNICAL SPECIFICATIONS

DIMENSIONS Height 85 cm

Width 60 cm

Depth 60 cm

POWER SUPPLY VOLTAGE/FREQUENCY 220-230V / 50 Hz

TOTAL POWER ABSORBED 2200 W (10A)

WATER PRESSURE Minimum 15 N/cm

Maximum 80 N/cm

MAXIMUM RECOMMENDED Cotton, linen 4.5 kg

LOAD Synthetics, delicate fabrics 2 kg

Wool 1 kg

SPIN SPEED Maximum 1000 rpm

This appliance complies with the following E.E.C. Directives:

- 73/23 EEC of 19.2.73 (Low Voltage Directive) and subsequent modifications;

- 89/336 EEC of 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.

IMPORTANT INFORMATIONS

YOU MUST READ THE WHOLE OF THIS

INSTRUCTION BOOK BEFORE YOU USE THE

APPLIANCE. FOLLOW THE ADVICE CAREFULLY.

KEEP THE BOOK FOR FUTURE REFERENCE. IF

YOU SELL OR GIVE AWAY THE APPLIANCE,

MAKE SURE THAT THE BOOK IS PASSED TO

THE NEW OWNER.

WARNINGS

■

The following warnings are provided in the

interest of overall safety. You must read them

before the appliance is installed or used.

INSTALLATION

■

This appliance is heavy. Care should be taken

when moving it.

■

All packaging and transit bolts must be removed

before the appliance is used. Serious damage

may occur if this is not done.

■

Any plumbing work required to install this appli-

ance should be carried out by a qualified plumber

or competent person.

■

Any electrical work required to install this applian-

ce should be carried out by a qualified electrician

or competent person.

■

Make sure that the appliance does not stand on its

electrical supply cable.

■

If the machine is situated on a carpeted floor,

please adjust the feet to ensure that air can

circulate freely.

USE

■

Always unplug the appliance and turn off the water

after use.

■

Do not overload the appliance.

■

Only wash fabrics which are designed to be ma-

chine washed. If in doubt, follow the instructions

you find on the label of the item itself.

■

Make sure that all pockets are empty. Hard, sharp

objects such as coins, safety pins, nails, screws or

stones can cause extensive damage.

■

Use only the recommended quantities of fabric

conditioner.

■

Do not machine wash fabrics which are saturated

with petroleum products. If volatile cleaning fluids

have been used, make sure that they are thorough-

ly removed from the fabric before it is placed in the

appliance.

■

Leave the porthole door slightly ajar between

washes to preserve the door seal.

■

Before you open the door of the machine check

that the water has drained. Do not open the door if

you can still see water.

SERVICE/REPAIR

■

You should not attempt to repair the machine

yourself. Repairs carried out by inexperienced or

unqualified persons may cause injury and/or more

serious faults to the machine.

■

This product should only be serviced by an autho-

rised Service Centre, and only genuine spare

parts should be used.

GENERAL SAFETY

■

It is dangerous to modify the specifications of this

appliance in any way.

■

This appliance is designed to be used by adults.

Children should not be allowed to touch the con-

trols or play with the product.

■

Pets and small children may climb into washing

machines. Check your appliance each time before

use.

■

The glass door becomes very hot during the

washing cycle. Keep children away from the

appliance while it is in use.

■

When disposing of your old washing machine, the

electric cable must be cut off and the door catch

must be made unusable.

INSTALLATION

Unpacking

All transit bolts and packing must be removed before

using the machine.

You are advised to keep all packing for re-use in case

you move house and the machine has to be transpor-

ted again.

Proceed as follows:

Using a spanner remove

the screw on the right at

the rear of the machine.

Carefully lay the machine

on its back making sure

that the hoses are not

squashed.

Place one of the polysty-

rene angle packings

between the machine

and bottom.

Remove the polystyrene block from underneath the

machine.

Release the two polythene bags by removing the

adhesive strip.

Carefully remove the right polythene bag (1) by pull-

ing it towards the centre of the machine. Repeat the

operation for the left polythene bag (2).

Set the machine upright and unscrew the two remai-

ning rear screws.

Slide out the 3 plastic spacers and plug the 3 holes

with the 3 plastic plugs which you can find on the

back of the machine.

Positioning

Position the machine on a firm level surface.

The machine must not touch the wall or other furni-

ture.

It is assumed that the tap, drainage point and socket

are within easy reach of the machine hoses and

power supply cable. If not, you are advised to call

your fitter in order to move the tap and/or drainage

point and/or socket.

Water inlet

Connect the water inlet

hose to a tap with a

gas thread spout after

fitting the filter supplied

with the machine.

The other end of the

inlet hose connected to

the machine can be tur-

ned in any direction.

Simply loosen the fitting,

rotate the hose and reti-

ghten.

The inlet hose must not

be extended. If it is too

short and you do not

wish to move the tap, replace it completely with a lon-

ger high pressure hose specifically designed to solve

problems of this type.

P0255

P0234

P0233

P0003

P0021

P0256

P0020

P0023

Water drainage

The end of the drain hose can be positioned in three

ways:

Over the edge of a

basin at a height of

between 60 and 90 cm.

To keep the drain hose

spout bent, use the spe-

cial plastic hose guide

supplied with the machi-

ne. Secure it to the wall

with a hook, for example,

or to the tap by means of

a piece of string, to pre-

vent the drain hose moving during the rinsing cycle

thus causing floods.

Into a basin drainpipe branch: the branch must be

above the basin siphon so that the end of the hose is

at least 60 cm from ground level.

Directly into a drainpipe: you are advised to use a

vertical 65 cm high pipe; in any case it should never

be shorter than 60 cm or longer than 90 cm.

The end part of the drain hose must always be venti-

lated, i.e. the internal diameter of the pipe must be

wider than the external diameter of the drain hose.

The drain hose can be extended up to a maximum

length of 180 cm. Use an extension with an internal

diameter at least equal to the diameter of the original

hose and a suitable fitting. The hose extension will

run along the floor and only the part near the draina-

ge point will be raised.

Levelling

Position the appliance and level it by tightening or

loosening one or two of the adjustable feet. Ensure

that the machine is resting securely with all four feet

on the ground. Once the machine has been levelled,

tighten up the lock nuts on all feet with the aid of a

screwdriver.

Electrical connection

Before plugging the appliance into the wall socket,

make sure that:

1. the mains voltage corresponds to the voltage given

in the technical specifications;

2. the meter, fuses, mains power supply and wall

socket can all take the maximum load required.

Make sure that the socket and plug are compatible

without having to use any type of adapter. If neces-

sary, have the domestic wiring system socket repla-

ced.

The electric cable must not be extended. If it is too

short and you do not wish to move the socket, repla-

ce it completely with a longer cable.

Safety standards require the appliance to be

earthed.

The Manufacturer accepts no liability for failure to

observe the above safety precautions.

P0235

P0254

P0509

1 Detergent dispenser drawer and programme card

Symbols

Prewash

Wash

Fabric softener

Chlorine

Programme cards in various languages are supplied

with the machine. One of these cards is located on

the front of the dispenser drawer, the others are in the

document pack.

2 Spin speed selector dial

By turning this dial from MAX to MIN you will obtain

the following speeds:

- cotton & linen: max 1000 rpm

min 650 rpm

- synthetics, delicates,

wool: max 850 rpm

min 450 rpm.

3 ON/OFF button

Press this button to start the machine, press it again

to stop a programme or to switch off the machine.

4 «Anti crease»button»

Press this button with the washing programmes for

synthetic or delicate fabrics in order to block the water

drainage of the last rinse. This avoids creasing when

the laundry is left inside the machine at the end of the

washing. To empty the machine, simply depress the

button again (the water will be drained and the

clothes will be gently spun) or select programme "M"

(drain).

5 «Economy » button E

For normally or lightly soiled laundry you can select

programme A 60°C or B 40°(cotton & linen) and pro-

gramme F 40°C (synthetics) by depressing but-

ton E.

The reduction in temperature from 95° to 60° and

from 60° to 40° will save energy. Equally good results

will be obtained because the reduced temperature is

compensated by maintaining the full washing time.

6 «Door open» button

Press this button to open the door.

7 «Door locked» light

This light stays on whilst the door is locked. The door

cannot be opened until the light has gone out.

8 «Temperature selector dial

Turn the dial clockwise or anti-clockwise to the requi-

red position.

It is also possible to perform a cold wash by turning

the dial to the symbol.

9 «Programme selector» dial

To select the required programme turn this dial

clockwise.

10 Operating pilot light

This light comes on when the programme starts and

goes out when the ON/OFF button is released.

USE

Control panel

P0909

1 234

Intuition

Washing hints

You are advised not to leave your laundry too long,

especially when damp. Damp laundry produces

mould and unpleasant smells.

Mould stains cannot be removed.

Sort your laundry

Carefully study the chart in this booklet explaining the

symbols used on clothes labels.

The following points are particularly important:

■

a line under the bowl means that the garment can-

not be washed using programmes for resistant

fabrics such as cotton and linen;

■

do not mix coloured garments with whites;

■

anticrease materials like polyester/cotton should

be treated as synthetics;

■

non-resistant fabrics like acrylic and most curtain

materials should be treated as delicate fabrics;

■

the wool programme is designed specifically for

pure new wool. Other types of wool and wool mix-

tures may shrink or felt if machine-washed.

Woollen garments should be spun briefly immedia-

tely after washing.

Extra Pre-wash

Pre-wash is not normally necessary. Your new

washing machine combined with modern detergents

will give perfect washing results without pre-wash,

thus saving energy, time, water and detergent.

However, when the laundry is particularly dirty (for

example if you have to wash mechanics’ overalls or

butchers’ aprons), you are advised to use prewash

with a biological detergent.

Temperatures

We suggest that white cotton and linen, if it is not

excessively soiled, can be washed at 60° instead of

90°. There should be no reduction in performance,

but there will be an energy saving of approximately

30%.

The same applies to a lesser extent to fast coloured

garments.

They usually require a temperature of 60° but if they

are not excessively dirty, you will get satisfactory

results at 40°.

Garments with non-fast colours should not be washed

at temperatures above 40°. If fast and non-fast

colours are washed together, they should be treated

as non-fast colours and therefore the temperature

should not exceed 40°.

Resistant white and coloured synthetics can normally

be washed at 60° but also in this case 40° is sufficient

if the laundry is not excessively dirty.

Delicate synthetics, synthetics with non-fast colours

and woollen garments must never be washed above

40°. If only one of the labels specifies 30°, this

temperature must be selected for the whole wash.

How much laundry can be washed in one

load?

For cotton and linen items as well as for synthetics

and wool refer to the quantities indicated in the pro-

gramme charts.

Strictly speaking you should always weigh your laun-

dry.

As weighing can be complicated, we suggest you

estimate the weight according to how full the drum is:

cotton and linen: drum full but not too tightly packed

resistant synthetics: no more than

of the drum

delicate fabrics and wool: no more than

of the

drum.

Before placing the laundry in the machine:

mend all tears, holes and ladders;

secure loose buttons and close poppers and zips;

do not wash frayed garments - mend hems before

washing;

remove all small objects from pockets. Nails, pins,

clips and similar objects can seriously damage your

washing machine and laundry;

remove curtain hooks;

wash coloured garments and in particular those with

non-fast colours separately when washing for the first

time. They are likely to lose colour the first time they

are washed;

treat obstinate stains such as grass, rust, tar, paint,

ink etc. with a stain remover before washing.

To remove paint stains, for example, use a volatile

substance such as turpentine: in this case, you

should wait for it to dry completely before washing.

The manufacturer of the appliance is not responsible

for any damage deriving from the use of volatile,

inflammable or toxic substances.

Detergents and additives

Good washing results also depend on the choice of

detergent and use of the correct quantities to avoid

waste and protect the environment.

Although biodegradable, detergents contain substan-

ces which, in large quantities, can damage the delica-

te ecological balance of nature.

Always use good quality detergents suitable for

use in washing machines.

Follow the indications given by the detergent manu-

facturer according to the weight of laundry, the

degree of soil and the hardness of the water in your

area; if you do not know how hard it is, ask your local

Water Authority.

Powder detergents

The washing powder should be placed in the appro-

priate compartments of the dispenser drawer before

starting the programme.

Special detergents are available for coloured and deli-

cate fabrics and for wool.

«Concentrated» powder detergents

Pour the concentrated powder detergent into the

compartment for the main wash.

The washing machine incorporates a recirculation

system which allows an optimal use of the concentra-

ted detergent.

Avoid selecting programmes including prewash

when concentrated detergents are used.

Avoid using dispensers supplied with the deter-

gents which have to be placed directly in the

drum.

Liquid detergents

A liquid detergent can be used in the middle compart-

ment of the dispenser drawer as long as you start the

machine up straight away without prewash.

Liquid additives

It may be advisable to use a liquid fabric softener

when you are going to dry synthetic garments in the

tumble dryer for example.

This prevents the fabrics becoming charged with sta-

tic electricity.

This appliance is equipped with a wash system called «DIRECT SPRAY».

The laundry is always kept damp with water and detergent, using a very efficient pump. In this way water

consumption is greatly reduced.

Further savings are achieved by washing small loads of laundry, since water and electricity consumption is pro-

portional to the quantity of laundry being washed. This wash system allows a reduction in water, detergent and

electricity consumption.

Degrees of water hardness

0-7

08-14

15-21

> 21

00-15

16-25

26-37

> 37

soft

medium

hard

very hard

Characteristic

German

degrees

French

degrees

Wash code symbols

These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.

Energetic wash

Delicate wash

Max. wash

temperature

95°C

Max. wash

temperature

60°C

Max. wash

temperature

40°C

Max. wash

temperature

30°C

Hand wash Do not

wash

at all

Bleaching Bleach in cold water Do not bleach

Ironing Hot iron

max 200°C

Warm iron

max 150°C

Lukewarm iron

max 110°C

Do not iron

Dry cleaning Dry cleaning

in all solvents

Dry cleaning in

perchlorethylene,

petrol, pure alcohol,

R 111 & R 113

Dry cleaning

in petrol,

pure alcohol

and R 113

Do not

dry clean

Drying Flat On the line On clothes

hanger

Tumble dry

high

temperature

low

temperature

Do not

tumble dry

Programme

description

Prewash at 30°-40°C

Drain and short spin

Wash at 60°-95°C

Rinses

Spin

Wash at 60°C

Rinses

Spin

Wash at 40°-60°C

Rinses

Spin

Wash at 40°C

Rinses

Spin

Wash at 30°-40°C

Rinses

Spin

Rinses with additives if added

Spin

Drain and long spin

«Energetic» programmes for cotton and linen

Maximum load: 4.5 kg

Whites

economy

Programme

Degree of

soiling

Temperature

selector

position

Programme

selector

position

Extra

Prewash

Very

soiled

Whites

Normally

soiled

Normally/lightly

soiled

Coloureds Normally

soiled

Coloureds

economy

Normally/lightly

soiled

Quick

wash

Lightly

soiled

Rinses

Spin

30°-40°

60°

40°-60°

40°

30°

40°

60°-95°

A+E

B (•)

B+E

(•) This programme at 60°C is the reference programme for the Energy label according to the article 2, paragraph

1 of the EEC Directive 92/75.

Consumptions with 4.5 kg cotton items:

- energy 1.2 kWh

- water 60 litres

- time 125 mins

Programme

description

Prewash at 30°-40°C

Drain and short spin

Wash at 40°-60°C

Rinses

Short spin (*)

Wash at 40°C

Rinses

Short spin (*)

Wash at 30°-40°C

Rinses

Short spin (*)

Wash at 30°-40°C

Rinses

Short spin (*)

(*) If the anti-crease button has not been depressed.

Rinses with softener if added

Short spin (*)

Short spin

Water draining

«Gentle» programmes for synthetics, mixed fabrics, wool

Maximum load: 2 kg, wool 1 kg

Programme

Degree of

soiling

Temperature

selector

position

Extra

Prewash

(not for wool)

Very

soiled

Synthetics

Normally

soiled

Synthetics

economy

Normally/lightly

soiled

Wool

Normally

soiled

Delicates/Silk

Normally

soiled

Rinses

Short spin

Drain

Programme

selector

position

30°-40°

40°-60°

40°

30°

40°

30°

40°

G+E

1. Place the laundry in the drum

Open the door by

depressing the button

Place the garments to

be washed inside the

drum one by one, laying

them as flat as possible.

Close the door ensuring

that the catch clicks into

place.

2. Measure out the detergent into the dis-

penser drawer

Pull out the detergent

dispenser drawer from

the control panel.

Pour the detergent into

the main wash compart-

ment. Follow the deter-

gent manufacturer’s gui-

delines for the amount

required.

If you wish to carry out

the prewash, pour the amount of detergent required

into the «prewash» compartment.

3. Add the liquid additive if required

Pour the softener, if

required, into the com-

partment marked

and chlorine into the

compartment marked

Do not exceed the MAX

level.

4. Select the required option.

5. Select the required temperature

Turn the temperature

selector dial until the

temperature coincides

with the marker.

6. Select the programme and start the

machine

Turn the programme selector dial to the desired posi-

tion.

Depress the ON/OFF button: the operating pilot light

and door locked light illuminate and the machine

starts working.

7. At the end of the programme

The appliance stops automatically.

If you have selected a gentle programme and depres-

sed button , the water of the last rinse must be

drained before opening the door.

Wait one or two minutes before opening the door

to give the electric locking mechanism time to release

it.

The door can be opened when the door locked light is

off.

Depress the ON/OFF button to switch the machine

off. The operating pilot light goes out.

Release the button.

Turn the water tap off and unplug the machine from

the mains.

Open the loading door and remove the laundry.

Ensure that the drum is completely empty by turning it

with one hand.

Leave the door ajar for a while to eliminate the steam.

Operating sequence

P0004

P0910

P0911

P0882

P0033

P0881

95°

Bodywork

The outside of the machine can be cleaned with warm

water and a neutral non-abrasive household deter-

gent. Wipe with clean water and dry after cleaning.

Important: do not use methylated spirit, solvents or

Electrolux EW1025F User manual

Brand: Electrolux

Model: EW1025F

Category: Washing machines

Type: User manual

Download PDF

report

Electrolux EW1025F User manual

Electrolux EW1025F User manual

Related papers

Other documents