Insert side panel to
back rods
Secure to bottom
assembly
Insert side panel to
front rod
Secure side panel and
front rod
Secure second side panel
and front rod
Secure top assembly
13
Congratulations! Your Box
is complete.
15
Accessorize with wheels!
Shop at www.waybasics.com
98 10Insert bottom hingeAttach top hinge and
door stop
Slide door panel into bottom
hinge and top insert hole
11
Secure door panel to top and
bottom hinges with 4 screws
(screwdriver not included)
1
2
3 4 5
6
7
Continue to install door,
otherwise skip to step 12
12
Fasten connectors
into bottom of Box
14
Stack. Organize. Customize.
*Orient rod with holes at outside edge
(front rod has 2 open slots)
Make sure small round
hole faces front for door
hinge
(back rod has 4 open slots)
(front rod has 2 open slots)
(small round hole faces
front for door hinge)