Kohler K-16012-2-CP Installation guide

Type
Installation guide

This manual is also suitable for

Kohler K-16012-2-CP is a widespread lavatory handle kit. It allows the user to control the flow of water from a sink or lavatory using two separate handles, one for hot water and one for cold water.

Specific features of the Kohler K-16012-2-CP include:

  • The kit includes two handles, two valve stems, two escutcheons, two spline adapters, four screws, and four caps.
  • The handles are made of metal and have a polished chrome finish.
  • The valve stems are made of brass and have a ceramic disc cartridge.
  • The escutcheons are made of plastic and have a white finish.
  • The spline adapters are made of metal and have a plastic insert.

Kohler K-16012-2-CP is a widespread lavatory handle kit. It allows the user to control the flow of water from a sink or lavatory using two separate handles, one for hot water and one for cold water.

Specific features of the Kohler K-16012-2-CP include:

  • The kit includes two handles, two valve stems, two escutcheons, two spline adapters, four screws, and four caps.
  • The handles are made of metal and have a polished chrome finish.
  • The valve stems are made of brass and have a ceramic disc cartridge.
  • The escutcheons are made of plastic and have a white finish.
  • The spline adapters are made of metal and have a plastic insert.
Installation Guide
Widespread Lavatory Handle Kit
M product numbers are for Mexico (i.e. K-12345M)
Los números de productos seguidos de
M corresponden a México (Ej.
K-12345M)
Français, page“ Français-1”
Español, página“ Español-1”
K-16012
113136-2-AB
Thank You For Choosing Kohler Company
We appreciate your commitment to Kohler quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don’t
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kohler Company.
Tools and Materials
Before You Begin
Observe all local plumbing and building codes.
Shut off the main water supply.
Kohler Co. reserves the right to make revisions in the design of
faucets without notice, as specified in the Price Book.
Various
Screwdrivers
Plumbers
Putty
113136-2-AB 2 Kohler Co.
1. Handle Valve Installation
Turn each valve to the closed position.
Place a spline adapter about halfway onto each valve stem.
Partially install a handle onto each spline adapter, and check the
handle alignment.
For further alignment, remove the handle and reposition the
spline adapter until the handle alignment is correct.
Secure each handle to the valve stem with the supplied standard
screw and cap or the vandal resistant screw and red (hot side) or
blue (cold side) cap.
Standard Cap
Standard
Screw
Red or
Blue Cap
Vandal-Resistant
Screw
Spline
Adapter
Valve
Stem
Escutcheon
Handle
Kohler Co. 3 113136-2-AB
USA: 1-800-4-KOHLER
Canada: 1-800-964-5590
México: 001-877-680-1310
kohler.com
©2004 Kohler Co.
113136-2-AB
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Kohler K-16012-2-CP Installation guide

Type
Installation guide
This manual is also suitable for

Kohler K-16012-2-CP is a widespread lavatory handle kit. It allows the user to control the flow of water from a sink or lavatory using two separate handles, one for hot water and one for cold water.

Specific features of the Kohler K-16012-2-CP include:

  • The kit includes two handles, two valve stems, two escutcheons, two spline adapters, four screws, and four caps.
  • The handles are made of metal and have a polished chrome finish.
  • The valve stems are made of brass and have a ceramic disc cartridge.
  • The escutcheons are made of plastic and have a white finish.
  • The spline adapters are made of metal and have a plastic insert.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI