2. Graco
  3. 406800B

Graco 406800B, 406800B, 15V825 Discrete I/O Board Kit User manual

  • Hello! I am an AI chatbot trained to assist you with the Graco 406800B User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Kit Instructions/Parts
15V825 Discrete I/O
Board Kit
406800B
ENG
To install Discrete I/O Board in a ProMix® 2KS Proportioner.
Not for use in explosive atmospheres.
Parts
Important Safety Instructions
Read all warnings and instructions in your ProMix
2KS manuals. Save all instructions.
Ref. Part No. Description Qty.
1 255766 BOARD, circuit, discrete I/O 1
2 n/a SUPPORT, board 4
3 n/a CONNECTOR, plug, 6 position; J2 and
J5, see
Fig. 2
2
4 n/a CONNECTOR, plug, 8 position; J3 and
J4, see Fig. 2
2
5 n/a CABLE, CAT 5; 3 ft (0.9 m) 1
Parts labeled n/a are not available separately.
Fig. 1
C
1 (see Fig. 2)
TI12496a
5
D
2
J6
1
Automatic system shown. These wire harnesses may not be present on manual systems.
1
Installation
1. Shut off ProMix 2KS power. Also shut off power at main
circuit breaker.
2. Unlock and open EasyKey door with its key.
3. Install the Discrete I/O board (1) in the position shown in
Fig. 1, using the four board supports (2). See Fig. 2 for
board orientation.
4. Connect the CAT 5 cable to J1 on the I/O board.
5. Route the cable through the wire channel (D) of the
EasyKey to the display board (C). Connect the CAT 5
cable to J6 on the display board.
6. Close and lock the EasyKey door.
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions. This manual contains English. MM 406800
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441
Copyright 2009, Graco Inc. is registered to ISO 9001
www.graco.com
Revised 01/2010
Fig. 2. Discrete I/O Board
JLS
J1
Purge Input
Job Complete
Input
External Color
Change Ready
Spare
Digital Input
Common
Mix Input
Recipe Change Input
Recipe Bit 0 Input
Flow Rate Alarm Output
Flow Calibrate Active
Fill Active
Mix Ready Output
Mix Active Output
Purge/Recipe Change Active Output
Digital Output Common/Power
Digital Output Common/Power
Digital Output
Common/
Power
Special
Output #1
Digital Input Common
Recipe Bit 5 Input
Recipe Bit 4 Input
Recipe Bit 3 Input
Recipe Bit 2 Input
Recipe Bit 1 Input
Special
Output #2
Special
Output #3
Special
Output #4
Digital Output
Common/
Power
J5 (3)
J2 (3)
J3 (4)
J4 (4)
NOTE: For detailed input/output
descriptions, see your ProMix 2KS
Operation Manual.
/