Graco 406800B is a Discrete I/O Board Kit designed for use with ProMix® 2KS Proportioners. It provides a range of digital input/output capabilities for controlling and monitoring various functions of the proportioner.
Key Features:
- 4 digital outputs for special functions, such as flow rate alarms, flow calibration, fill activation, mix readiness, mix activation, and purge/recipe change activation
- 7 digital inputs for recipe selection, external color change ready, job complete, purge, and mix
- Digital input and output commons for easy wiring
- Pluggable connectors for convenient installation and maintenance
Graco 406800B is a Discrete I/O Board Kit designed for use with ProMix® 2KS Proportioners. It provides a range of digital input/output capabilities for controlling and monitoring various functions of the proportioner.
Key Features:
- 4 digital outputs for special functions, such as flow rate alarms, flow calibration, fill activation, mix readiness, mix activation, and purge/recipe change activation
- 7 digital inputs for recipe selection, external color change ready, job complete, purge, and mix
- Digital input and output commons for easy wiring
- Pluggable connectors for convenient installation and maintenance
Kit Instructions/Parts
15V825 Discrete I/O
Board Kit
406800B
ENG
To install Discrete I/O Board in a ProMix® 2KS Proportioner.
Not for use in explosive atmospheres.
Parts
Important Safety Instructions
Read all warnings and instructions in your ProMix
2KS manuals. Save all instructions.
Ref. Part No. Description Qty.
1 255766 BOARD, circuit, discrete I/O 1
2 n/a SUPPORT, board 4
3 n/a CONNECTOR, plug, 6 position; J2 and
J5, see
Fig. 2
2
4 n/a CONNECTOR, plug, 8 position; J3 and
J4, see Fig. 2
2
5 n/a CABLE, CAT 5; 3 ft (0.9 m) 1
Parts labeled n/a are not available separately.
Fig. 1
C
1 (see Fig. 2)
TI12496a
5
D
2
J6
1
Automatic system shown. These wire harnesses may not be present on manual systems.
1
Installation
1. Shut off ProMix 2KS power. Also shut off power at main
circuit breaker.
2. Unlock and open EasyKey door with its key.
3. Install the Discrete I/O board (1) in the position shown in
Fig. 1, using the four board supports (2). See Fig. 2 for
board orientation.
4. Connect the CAT 5 cable to J1 on the I/O board.
5. Route the cable through the wire channel (D) of the
EasyKey to the display board (C). Connect the CAT 5
cable to J6 on the display board.
6. Close and lock the EasyKey door.
All written and visual data contained in this document reflects the latest product information available at the time of publication.
Graco reserves the right to make changes at any time without notice.
Original instructions. This manual contains English. MM 406800
Graco Headquarters: Minneapolis
International Offices: Belgium, China, Japan, Korea
GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440-1441
Copyright 2009, Graco Inc. is registered to ISO 9001
www.graco.com
Revised 01/2010
Fig. 2. Discrete I/O Board
JLS
J1
Purge Input
Job Complete
Input
External Color
Change Ready
Spare
Digital Input
Common
Mix Input
Recipe Change Input
Recipe Bit 0 Input
Flow Rate Alarm Output
Flow Calibrate Active
Fill Active
Mix Ready Output
Mix Active Output
Purge/Recipe Change Active Output
Digital Output Common/Power
Digital Output Common/Power
Digital Output
Common/
Power
Special
Output #1
Digital Input Common
Recipe Bit 5 Input
Recipe Bit 4 Input
Recipe Bit 3 Input
Recipe Bit 2 Input
Recipe Bit 1 Input
Special
Output #2
Special
Output #3
Special
Output #4
Digital Output
Common/
Power
J5 (3)
J2 (3)
J3 (4)
J4 (4)
NOTE: For detailed input/output
descriptions, see your ProMix 2KS
Operation Manual.
-
1
-
2
Graco 406800B User manual
- Type
- User manual
- This manual is also suitable for
Graco 406800B is a Discrete I/O Board Kit designed for use with ProMix® 2KS Proportioners. It provides a range of digital input/output capabilities for controlling and monitoring various functions of the proportioner.
Key Features:
- 4 digital outputs for special functions, such as flow rate alarms, flow calibration, fill activation, mix readiness, mix activation, and purge/recipe change activation
- 7 digital inputs for recipe selection, external color change ready, job complete, purge, and mix
- Digital input and output commons for easy wiring
- Pluggable connectors for convenient installation and maintenance
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Graco 313881B User manual
-
-
-
-
-
-
-
-
Graco 312777E - ProMix 2KS Plural Component Proportioner, Repair-Parts Owner's manual
-
Gateway 312785C User manual