Harbor Freight Tools 96153 User manual

Brand: Harbor Freight Tools

Model: 96153

Type: User manual

APPLE PEELER

Model

96153

ASSEMBLY AND OPERATION INSTRUCTIONS

Due to continuing improvements, actual product may differ slightly from the product described herein.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND

ALL WARNINGS AND INSTRUCTIONS BEFORE USE.

2007 by Harbor Freight Appliances

of this manual or any artwork contained herein may be reproduced in any shape

or form without the express written consent of Harbor Freight Appliances.

For technical questions or replacement parts, please call 1-800-444-3353.

Page 2SKU 96153

For technical questions, please call 1-800-444-3353.

SPECIFICATIONS

Construction

Case is polystyrene plastic

Blades (extra blade included) and Spikes are

stainless steel.

Dimensions 8” x 7” x 5”

Weight 0.8 lb.

Save This Manual

You will need this manual for the safety warnings and precautions, assembly, operat-

ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram.

Keep your invoice with this manual. Write the invoice number on the inside of the front

cover. Write the product’s serial number in the back of the manual near the assembly

diagram, or write month and year of purchase if product has no number. Keep this manual

and invoice in a safe and dry place for future reference.

GENERAL SAFETY RULES

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS

Failure to follow all instructions listed below may result in serious injury.

SAVE THESE INSTRUCTIONS

Keep your work area clean and well lit. Cluttered counters and dark areas invite

accidents.

Keep children and visitors away while using this product. Distractions can cause

accidents. Caution: Sharp spikes and blade can lead to injury. Children must be

kept away from this product.

Stay alert. Watch what you are doing and use common sense when operating. Do

not use while tired or under the inﬂuence of drugs, alcohol, or medication. A moment

of inattention while operating could result in personal injury.

Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Loose

clothes, jewelry, or long hair can be caught in moving parts.

Do not force the appliance. The correct appliance will do the job better and safer

at the rate for which it is designed. Do not force or use the appliance for a purpose

for which it is not intended.

Store idle appliances out of reach of children and other untrained persons.

Appliances are dangerous in the hands of untrained users.

Page 3SKU 96153

For technical questions, please call 1-800-444-3353.

Maintain appliances with care. Keep blade sharp and clean. Properly maintained

appliances with a sharp cutting edge are less likely to bind and are easier to control.

Do not use a damaged appliance.

Check for misalignment or binding of moving parts, breakage of parts, and any

other condition that may affect the appliance’s operation. Many accidents are

caused by poorly maintained appliances.

Maintain labels and nameplates on the appliance. These carry important infor-

mation. If unreadable or missing, contact Harbor Freight Appliances for a replace-

ment.

UNPACKING

When unpacking, check to make sure that the item is intact and undamaged. If any

parts are missing or broken, please call Harbor Freight Appliances at the number shown

on the cover of this manual as soon as possible.

ASSEMBLY INSTRUCTIONS

Press Handle (1) onto Crankshaft (8). Apple Peeler is ready for use.

OPERATION INSTRUCTIONS

Clean each part with soap and water before using. Dry thoroughly.

Caution: Blade and Spikes are extremely sharp. Be careful when working near them.

Place Apple Peeler on a clean and level surface and rotate Handle until the Blade is

at the bottom position of it’s arc.

Push apple down on Spikes (7) and remove Blade Cover (5).

Turn handle (1) clockwise. Blade will cut peel away from apple, from bottom to top,

without further adjustment.

When apple is peeled, carefully remove from spikes.

Clean Blade and carefully replace Blade Cover.

Changing Blades

Put Blade Cover on Blade. Hook ﬁnger through loop at top of Blade and pull until

the Blade and Blade Cover release. Be wary of the Spikes.

Remove Blade Cover and safely dispose of old Blade. Put Cover on new Blade.

Slide Blade and Cover back onto peeler arm with Blade pointed downwards.

Cleaning

Apple Peeler is NOT dishwasher safe. Clean only by hand with a soft cloth and mild

detergent.

07i

Page 4SKU 96153

For technical questions, please call 1-800-444-3353.

PARTS AND ASSEMBLY DIAGRAM

Part Description

1 Handle

2 Knob

3 Retainer ring

4 Blade

Part Description

5 Blade Cover

6 Main Unit

7 Spikes

8 Crankshaft

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND

ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE APPLIANCE ONLY. NEITHER

THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY

OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS

TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF

THE PRODUCT. IN FACT, THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY

STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN

BY CERTIFIED AND LICENSED TECHNICIANS, AND NOT BY THE BUYER. THE BUYER

ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR HER REPAIRS TO THE

ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS

OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Record Product’s Serial Number Here:

Note: If product has no serial number, record month and year of purchase instead.

Note: Some parts are listed and shown for illustration purposes only, and are not avail-

able individually as replacement parts.

Harbor Freight Tools 96153 User manual

Harbor Freight Tools 96153 User manual

Harbor Freight Tools 96153 User manual

Related papers

Other documents