Part No.: ICCMSRCMC5
Rev: A
Page 1 of 2
© Copyright 2013, ICC. This document and the designs, specifications and information contained herein are the property of ICC. Reproduction, modification,
alteration or unauthorized use without ICC’s approval is strictly prohibited. ICC and the ICC logo are registered trade name and trademark of ICC. All rights reserved.
Product Specification
Rear Cable Management Bracket Panel, 6-Pack
Package Includes
A. Rear Bracket Cable Management
Panel, 6 pcs.
B. #12-24 x 5/8” Pan Head, Pilot Point
Machine Screw, 24 pcs.
Features and Benefits
No extra rack mount spaces (RMS) needed
Rear panel extends out 5" deep
Provides cable support in rear of patch panels and other equipment
Integrated cable anchor points
Facilitates cable bend radius
Designed to fit all standard 19” wide racks
Used with ICC’s 2-post, 4-post distribution racks, cable management racks, wall mount racks and
hinged brackets
Integrated tie wrap supports along the panel helps maintain cable bundles in order
Part No.: ICCMSRCMC5
Rev: A
Page 2 of 2
© Copyright 2013, ICC. This document and the designs, specifications and information contained herein are the property of ICC. Reproduction, modification,
alteration or unauthorized use without ICC’s approval is strictly prohibited. ICC and the ICC logo are registered trade name and trademark of ICC. All rights reserved.
Product Specification
Specifications
NOTE: UNLESS OTHERWISE SPECIFIED
1. MATERIAL: 16 GA CRS
2. SURFACE FINISH: BLACK POWDER COAT
For warranty information, go online to icc.com/warranty.
Part No: ICCMSRCMC5
Rev: A
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
