Turntable innovation for vinyl starters with class-leading sound quality and computer interface!
A quiet-running synchronous motor with silicone belt is driving a low-resonance platter made from MDF.
The main chassis is made from lightweight, but very stiff particle board.
Utilising a straight 8,6“ aluminium tonearm with a single-pivot bearing made from steel, a spectacular good tracking of vinyl
grooves is guaranteed. Due to the brilliant concept, unwanted resonances are effectively transferred into the tonearmbase and
turntable chassis. Armtube and headshell are made from a single piece of aluminium.
Because Essential Phono USB comes with pre-mounted cartridge and built-in phono preamplifier with USB output, connection
to both line-level input of your hifi system and PC/Mac easily can be used simultaneously!
Product information
08. 2012
Update: JK / DZ Datum 16.08.2012
Essential Phono USB
Turntable for Hifi & audio transfer to PC/Mac
•
Belt drive with silicone belt
•
Low vibration synchronous motor
•
8,6” single-pivot aluminium tonearm
•
Ortofon OM5e cartridge, pre-mounted
•
Integrated Phone-MM preamplifier
•
Connections: line-level RCA to amp &
USB to PC/Mac (simultaneously)
•
Colour options: Black, Red, White
speed 33, 45 (manual speed change)
principle belt drive
platter 300mm MDF with felt mat (0,8kg)
main bearing stainless steel
tonearm 8,6” aluminium, single-pivot
effective arm length 218,5 mm
effective arm mass 8,9 gr
overhang 18,5mm
counterweight for cartridge 4 - 9g (optional counterweight for 8 - 15g)
tracking force (min-max) 10 - 30mn
included accessory power supply 16Volt AC, dust cover
dimensions 415 x 112 x 365mm (WxHxD)
weight 3,9 kg net
PRO-JECT AUDIO SYSTEMS
a division of AUDIO TUNING GmbH
1050 Wien, Margaretenstraße 98,
Essential Phono USB
black/red/white
Verkaufspreis
299,00 €
/