15
www.dometic-waeco.com
Parking aids
Painted WAECO sensor – awless installation result
Well proven complete solution
Four built-in sensors each on the front and rear make sure
nothing can go wrong when you park your car. MagicWatch
MWE 910 is a well proven hard-wired parking aid. It
exceeds the performance of many factory-fitted systems
and guarantees flawless installation results. A special
feature is the option to shift the stop line.
Radio-based complete system
The wireless parking aid WPS 910 is ideal for parking with
perfection. Featuring the same elegant sensors like the
MWE 910, it is even faster to install. The wireless transmission
of the control signals spares you the eort of having to lay
cables across the length of the vehicle. There’s no need to
drill into the bulkhead either, because the two robust control
units are fitted straight in the bumpers.
Safety for
rear and
front
WAECO MagicWatch MWE 910 3.07
Parking aid for cars, 8 built-in sensors (ø 18 mm)
≥ Complete solution for front and rear
≥ For vehicles up to 2.20 m wide
≥ Parameter Programming System (PPS)
Ref. No. MWE-910-8PPS
Installation results like with an original fitting
Supplied with core bit
Optional extras
1.5 m extension cable for sensors // Ref. No. 2221500002
MagicSpeed CBI 150, Digital/analogue translator // Ref. No. 9101400060
Punching tool for 18 mm sensors // Ref. No. 9101500013
Punching tool for 22 mm sensors with 10° mount // Ref. No. 9101500024
ON/OFF switch for front parking aid // Ref. No. MWS-910
WAECO MagicWatch WPS 910 3.07
Wireless parking aid for cars, 8 built-in sensors
≥ Radio-based complete solution for front and rear
≥ For vehicles up to 2.20 m wide
≥ Option to shift the stop line
≥ Integrated CAN bus interface for the speed signal
(analogue connection is also possible)
Ref. No. 9101500020
Flawless installation – looks like an original fitting
Optional extras
Punching tool for 18 mm sensors // Ref. No. 9101500013
Punching tool for 22 mm sensors with 10° mount // Ref. No. 9101500024