14
31
2
64 5
Choose the number of the
required program by pres-
sing the
and
buttons.
Validate by pressing
.
Choose the desired texture
by pressing and but-
tons. Validate by pressing
.
Choose the number of ser-
vings by pressing and
buttons. Validate by pressing
.
The picto
flashes on the
screen. It indicates quantity of
rice, quinoa or lentils (number
of cups) to pour in the bowl.
Once you have poured them
in the bowl, close the lid and
validate by pressing
.
The picto
flickers on the
screen. It indicates the quan-
tity of cold water to add. Use
the measuring cup for water
provided with the appliance to
measure the water quantity.
The picto appears on the
screen, it indicates that you
have to close the lid and
the Delayed start button
flashes. You can start the
cooking immediately or
delay the start (see the De-
layed Start section for ins-
tructions). Press button to
start the cooking immedia-
tely. The appliance sounds
a long beep to indicate the
beginning of the cooking.
The appliance enters into
automatic cooking: the picto
, and appear on
the screen.
The picto
disappears
before the end of cooking, the
appliance sounds 2 beeps and
the screen displays the remai-
ning cooking time. This time can
differ according to the choosen
program and the desired texture.
At the end of the cooking, the
appliance sounds 3 beeps and
enters into keep warm (the keep
warm button illuminates).
White rice (01) / Brown rice (02) / Quinoa (04) / Lentils (05)
7
Note: Water quantities for
rice cooking can be adjust
depending on your taste: add
a little extra water for fluffier
rice and a little less water for
firmer rice.