MSI MS-7693v3.0 Owner's manual



970A-G43 seres

MS-7693 (v3.x) Manboard

G52-76931XB

Europe verson



Preface

MS-7693

Preface

MS-7693

Preface

Copyrght Notce

The materal n ths document s the ntellectual property of MICRO-STAR INTERNA-

TIONAL. We take every care n the preparaton of ths document, but no guarantee s

gven as to the correctness of ts contents. Our products are under contnual mprove-

ment and we reserve the rght to make changes wthout notce.

Trademarks

All trademarks n ths manual are propertes of ther respectve owners.

MSI

®

s regstered trademark of Mcro-Star Int’l Co.,Ltd.

NVIDIA

®

s regstered trademark of NVIDIA Corporaton.

ATI

®

s regstered trademark of AMD Corporaton.

AMD

®

s regstered trademarks of AMD Corporaton.

Intel

®

s regstered trademarks of Intel Corporaton.

Wndows

®

s regstered trademarks of Mcrosoft Corporaton.

AMI

®

s regstered trademark of Amercan Megatrends Inc.

Award

®

s a regstered trademark of Phoenx Technologes Ltd.

Sound Blaster

®

s regstered trademark of Creatve Technology Ltd.

Realtek

®

s regstered trademark of Realtek Semconductor Corporaton.

JMcron

®

s regstered trademark of JMcron Technology Corporaton.

Netware

®

s regstered trademark of Novell, Inc.

Lucd

®

s trademark of LucdLogx Technologes, Ltd.

VIA

®

s regstered trademark of VIA Technologes, Inc.

ASMeda

®

s regstered trademark of ASMeda Technology Inc.

Pad, Phone, and Pod are trademarks of Apple Inc.

Revson Hstory

Revson Revson Hstory Date

V3.0 Frst release for Europe verson 2012/ 12

￭

Preface

MS-7693

Preface



Preface

MS-7693

Preface

Techncal Support

If a problem arses wth your system and no soluton can be obtaned from the user’s

manual, please contact your place of purchase or local dstrbutor. Alternatvely, please

try the followng help resources for further gudance.

Vst the MSI webste for techncal gude, BIOS

updates, drver updates, and other nformaton:

http://www.ms.com/servce/download/

Contact our techncal sta at:

http://support.ms.com

Safety Instructons

Always read the safety nstructons carefully.

Keep ths User’s Manual for future reference.

Keep ths equpment away from humdty.

Lay ths equpment on a relable at surface before settng t up.

The openngs on the enclosure are for ar convecton hence protects the equpment

from overheatng. DO NOT COVER THE OPENINGS.

Make sure the voltage of the power source s at 110/220V before connectng the

equpment to the power nlet.

Place the power cord such a way that people can not step on t. Do not place

anythng over the power cord.

Always Unplug the Power Cord before nsertng any add-on card or module.

All cautons and warnngs on the equpment should be noted.

Never pour any lqud nto the openng that can cause damage or cause electrcal

shock.

If any of the followng stuatons arses, get the equpment checked by servce

personnel:

The power cord or plug s damaged.

Lqud has penetrated nto the equpment.

The equpment has been exposed to mosture.

The equpment does not work well or you can not get t work accordng to User’s

Manual.

The equpment has been dropped and damaged.

The equpment has obvous sgn of breakage.

DO NOT LEAVE THIS EQUIPMENT IN AN ENVIRONMENT ABOVE 60

o

C (140

o

F),

IT MAY DAMAGE THE EQUIPMENT.

￭

◯

￭

v

Preface

MS-7693

Preface

MS-7693

Preface

CE Conformty

Hereby, Mcro-Star Internatonal CO., LTD declares that ths devce s

n complance wth the essental safety requrements and other relevant

provsons set out n the European Drectve.

FCC-B Rado Frequency Interference Statement

Ths equpment has been tested and found to comply wth the lmts for a Class B dgtal

devce, pursuant to Part 15 of the FCC Rules. These lmts are desgned to provde

reasonable protecton aganst harmful nterference n a resdental nstallaton. Ths

equpment generates, uses and can radate rado frequency energy and, f not nstalled

and used n accordance wth the nstructons, may cause harmful nterference to rado

communcatons. However, there s no guarantee that nterference wll not occur n a

partcular nstallaton. If ths equpment does cause harmful nterference to rado or

televson recepton, whch can be determned by turnng the equpment o and on, the

user s encouraged to try to correct the nterference by one or more of the measures

lsted below.

Reorent or relocate the recevng antenna.

Increase the separaton between the equpment and recever.

Connect the equpment nto an outlet on a crcut derent from that to whch the

recever s connected.

Consult the dealer or an experenced rado/televson techncan for help.

Notce 1

The changes or modcatons not expressly approved by the party responsble for

complance could vod the user’s authorty to operate the equpment.

Notce 2

Shelded nterface cables and A.C. power cord, f any, must be used n order to comply

wth the emsson lmts.

VOIR LA NOTICE D’INSTALLATION AVANT DE RACCORDER AU RESEAU.

◯

Ths devce comples wth Part 15 of the FCC Rules. Operaton s subject to the followng

two condtons:

ths devce may not cause harmful nterference, and

ths devce must accept any nterference receved, ncludng nterference that may

cause undesred operaton.

1)

2)

Mcro-Star Internatonal

MS-7693

Preface

MS-7693

Preface

v

Preface

MS-7693

Preface

Radaton Exposure Statement

Ths equpment comples wth FCC radaton exposure lmts set forth for an uncon-

trolled envronment. Ths equpment and ts antenna should be nstalled and operated

wth mnmum dstance 20 cm between the radator and your body. Ths equpment and

ts antenna must not be co-located or operatng n conjuncton wth any other antenna

or transmtter.

European Communty Complance Statement

The equpment comples wth the RF Exposure Requrement 1999/519/EC, Councl

Recommendaton of 12 July 1999 on the lmtaton of exposure of the general publc

to electromagnetc elds (0–300GHz). Ths wreless devce comples wth the R&TTE

Drectve.

Tawan Wreless Statements

無線設備警告聲明

經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻

率、加大功率或變更原設計之特性及功能。

低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應立

即停用，並改善至無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線

電通信。低功率射頻電機須忍受合法通信或工業、科學及醫療用電波輻射性電機設備之

干擾。

警告使用者:這是甲類資訊產品，在居住的環境中使用時，可能會造成無線電干擾，在

這種情況下，使用者會被要求採取某些適當的對策。

Japan VCCI Class B Statement

クラス B 情報技術装置

この装置は、情報技術装置等電波障害自主規制協議会（VCCI）の基準に基づくクラ

スB情報技術装置です。この装置が家庭内でラジオやテレビジョン受信機に近接して

使われると、受信障害を引き起こすことがあります。取扱説明書にしたがって正しい

取り扱いをしてください。

Korea Warnng Statements

당해 무선설비는 운용중 전파혼신 가능성이 있음

v

Preface

MS-7693

Preface

MS-7693

Preface

Calforna, USA:

The button cell battery may contan perchlorate materal and requres

specal handlng when recycled or dsposed of n Calforna.

For further nformaton please vst:

http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

Tawan:

For better envronmental protecton, waste batteres should be collected

separately for recyclng or specal dsposal.

廢電池請回收

European Unon:

Batteres, battery packs, and accumulators should not be dsposed of as

unsorted household waste. Please use the publc collecton system to

return, recycle, or treat them n complance wth the local regulatons.

Battery Informaton

Chemcal Substances Informaton

In complance wth chemcal substances regulatons, such as the EU REACH Regulaton

(Regulaton EC No. 1907/2006 of the European Parlament and the Councl), MSI

provdes the nformaton of chemcal substances n products at:

http://www.ms.com/html/popup/csr/evmtprtt_pcm.html

CAUTION: There s a rsk of exploson, f battery s ncorrectly replaced.

Replace only wth the same or equvalent type recommended by the manufacturer.

Preface

MS-7693

Preface

v

Preface

MS-7693

Preface

WEEE (Waste Electrcal and Electronc Equpment) Statement

ENGLISH

To protect the global envronment and as an envronmentalst, MSI must re-

mnd you that...

Under the European Unon (“EU”) Drectve on Waste Electrcal and Electron

-

c Equpment, Drectve 2002/96/EC, whch takes eect on August 13, 2005,

products of “electrcal and electronc equpment” cannot be dscarded as mu-

ncpal wastes anymore, and manufacturers of covered electronc equpment

wll be oblgated to take back such products at the end of ther useful lfe. MSI wll com-

ply wth the product take back requrements at the end of lfe of MSI-branded products

that are sold nto the EU. You can return these products to local collecton ponts.

DEUTSCH

Hnwes von MSI zur Erhaltung und Schutz unserer Umwelt

Gemäß der Rchtlne 2002/96/EG über Elektro- und Elektronk-Altgeräte dürfen Elek

-

tro- und Elektronk-Altgeräte ncht mehr als kommunale Abfälle entsorgt werden. MSI

hat europawet verschedene Sammel- und Recyclngunternehmen beauftragt, de n

de Europäsche Unon n Verkehr gebrachten Produkte, am Ende senes Lebenszyklus

zurückzunehmen. Btte entsorgen Se deses Produkt zum gegebenen Zetpunkt aus-

schlesslch an ener lokalen Altgerätesammelstelle n Ihrer Nähe.

FRANÇAIS

En tant qu’écologste et an de protéger l’envronnement, MSI tent à rappeler cec...

Au sujet de la drectve européenne (EU) relatve aux déchets des équpement élec

-

trques et électronques, drectve 2002/96/EC, prenant eet le 13 août 2005, que les

produts électrques et électronques ne peuvent être déposés dans les décharges ou

tout smplement ms à la poubelle. Les fabrcants de ces équpements seront oblgés de

récupérer certans produts en n de ve. MSI prendra en compte cette exgence relatve

au retour des produts en n de ve au sen de la communauté européenne. Par con-

séquent vous pouvez retourner localement ces matérels dans les ponts de collecte.

РУССКИЙ

Компания MSI предпринимает активные действия по защите окружающей среды,

поэтому напоминаем вам, что....

В соответствии с директивой Европейского Союза (ЕС) по предотвращению

загрязнения окружающей среды использованным электрическим и электронным

оборудованием (директива WEEE 2002/96/EC), вступающей в силу 13

августа 2005 года, изделия, относящиеся к электрическому и электронному

оборудованию, не могут рассматриваться как бытовой мусор, поэтому

производители вышеперечисленного электронного оборудования обязаны

принимать его для переработки по окончании срока службы. MSI обязуется

соблюдать требования по приему продукции, проданной под маркой MSI на

территории EC, в переработку по окончании срока службы. Вы можете вернуть

эти изделия в специализированные пункты приема.

Page is loading ...

Englsh

970A-G43 Seres

En-2

MS-7693 Manboard

Manboard Speccatons

Processor Support

Supports AMD

®

FX

TM

/ Phenom

TM

II/ Athlon

TM

II and Sempron

TM

processors for the

AM3/ AM3+ socket

HyperTransport

HyperTransport™ 3.0, supports up to 4.8 GT/s

Chpset

AMD

®

970 & SB950 chpset

Memory Support

4x DDR3 DIMMs support for DDR3-1066/ 1333/ 1600/ 1866/ 2133*(OC) MHz up to

32GB max

Supports Dual-Channel mode

LAN

Supports LAN 10/ 100/ 1000 Fast Ethernet by Realtek

®

8111E

Audo

Integrated HD audo codec by Realtek

®

ALC887

8-channel audo wth jack sensng

Complant wth Azala 1.0 Spec

SATA

6x SATA 6Gb/s ports by AMD

®

SB950

RAID

SATA1~6 support RAID 0/ 1/ 5/ 10 mode by AMD

®

SB950

USB 3.0

2x USB 3.0 rear I/O ports & 1x USB 3.0 onboard connector by RENESAS

UPD720202

Mult-GPU

Supports AMD

®

CrossFre™ Technology

■

En-3

Englsh

Connectors & Buttons

Back panel

1x PS/2 keyboard port

1x PS/2 mouse port

6x USB 2.0 ports

2x USB 3.0 ports

1x LAN port

6x audo ports

On-Board

3x USB 2.0 connectors

1x USB 3.0 connector

1x TPM Module connector

1x Front Panel Audo connector

1x Chasss Intruson connector

1x Seral port connector

Slots

2x PCIe 2.0 x16 slots

PCI_E2 supports up to PCIe x16 speed

PCI_E4 supports up to PCIe x4 speed

2x PCIe 2.0 x1 slots

2x PCI slots

Form Factor

ATX (30.5 cm X 22.5 cm)

Mountng Screw Holes

6x mountng holes

For the latest nformaton about CPU, please vst

http://www.ms.com/servce/cpu-support/

For more nformaton on compatble components, please vst

http://www.ms.com/servce/test-report/

■

-

■

-

■

-

■

If you need to purchase accessores and request the part numbers, you could search

the product web page and nd detals on our web address http://www.ms.com/ndex.

php

En-4

MS-7693 Manboard

Connectors Quck Gude

Back Panel

CPU1

CPUFAN

DIMM2

JUSB3

JPWR1

SATA3_4

JAUD1

JBAT1

PCI_E1

JUSB4

JCOM1

DIMM1

JFP2

JPWR2

JCI1

JFP1

SYSFAN1

SYSFAN2

DIMM3

DIMM4

SATA2

SATA1

SATA5_6

JUSB2

JUSB1

JTPM1

PCI_E2

PCI_E3

PCI_E4

PCI1

PCI2

En-5

Englsh

Connectors Reference Gude

Port Name Port Type Page

Back Panel I/O Ports En

-6

CPU1 AM3/ AM3+ CPU Socket En-

9

CPUFAN,SYSFAN1~2 Fan Power Connectors En-1

7

DIMM1~4 DDR3 Memory Slots En-1

3

JAUD1 Front Panel Audo Connector En-2

1

JBAT1 Clear CMOS Jumper En-2

3

JCI1 Chasss Intruson Connector En-1

9

JCOM1 Seral Port Connector En-2

1

JFP1, JFP2 Front Panel Connectors En-1

8

JPWR1 ATX 24-pn Power Connector En-1

2

JPWR2 ATX 8-pn Power Connector En-1

2

JTPM1 TPM Module Connector En-2

2

JUSB1~3 USB 2.0 Expanson Connectors En-1

9

JUSB4 USB 3.0 Expanson Connector En-2

0

PCI_E1, E3 PCIe x1 Expanson Slots En-1

5

PCI_E2, E4 PCIe x16 Expanson Slots En-1

5

PCI1, 2 PCI Expanson Slots En-1

5

SATA1~6

SATA 6Gb/s Connectors En-16

En-6

MS-7693 Manboard

Back Panel Quck Gude

Mouse/Keyboard

The standard PS/2

®

mouse/keyboard DIN connector s for a PS/2

®

mouse/keyboard.

USB 2.0 Port

The USB 2.0 port s for attachng USB 2.0 devces such as keyboard, mouse, or other

USB 2.0-compatble devces.

USB 3.0 Port

USB 3.0 port s backward-compatble wth USB 2.0 devces. It supports data transfer

rate up to 5 Gbt/s (SuperSpeed).

Important

In order to use USB 3.0 devces, you must connect to a USB 3.0 port. If a USB cable s

used, t must be USB 3.0 complant.

▶

USB 3.0 Port

LAN

PS/2

Mouse

USB 2.0 PortUSB 2.0 Port

Lne-In

Lne-Out

Mc

RS-Out

CS-Out

SS-Out

PS/2

Keyboard

USB 2.0 Port

En-7

Englsh

LAN

The standard RJ-45 LAN jack s for connectng to a

Local Area Network (LAN).

LED Color LED State Condton

Left Yellow O LAN lnk s not establshed.

On(Steady) LAN lnk s establshed.

On(ashng) The computer s communcatng wth another computer on the network.

Rght

Green O 10 Mbts/sec data rate

On 100 Mbts/sec data rate

Orange On 1000 Mbts/sec data rate

Audo Ports

These connectors are used for audo devces. The color of the jack refers to the functon

of the connector.

Blue-Lne n: Used for connectng external audo outputtng devces.

Green- Lne out: Used as a connector for speakers or headphone.

Pnk- Mc: Used as a connector for a mcrophone.

Black- RS-Out: Rear surround sound lne out n 4/ 5.1/ 7.1 channel mode.

Orange- CS-Out: Center/ subwoofer lne out n 5.1/ 7.1 channel mode.

Gray- SS-Out: Sde surround sound lne out n 7.1 channel mode.

▶

■

Yellow Green/ Orange

En-8

MS-7693 Manboard

Gold arrow

CPU (Central Processng Unt)

Important

Overheatng

Overheatng can serously damage the CPU and manboard. Always make sure the

coolng fans work properly to protect the CPU from overheatng. Be sure to apply an

even layer of thermal paste (or thermal tape) between the CPU and the heatsnk to

enhance heat dsspaton.

Replacng the CPU

When replacng the CPU, always turn o the system’s power supply and unplug the

power supply’s power cord to ensure the safety of the CPU.

Overclockng

Ths manboard s desgned to support overclockng. Before attemptng to overclock,

please make sure that all other system components can tolerate overclockng. Any

attempt to operate beyond product speccatons s not recommend. MSI does not

guarantee the damages or rsks caused by nadequate operaton beyond product

speccatons.

Introducton to AM3/ AM3+ CPU

The surface of CPU. Remember to apply some thermal paste on t for better heat

dsperson.

En-9

Englsh

CPU & Cooler Installaton

When you are nstallng the CPU, make sure the CPU has a cooler attached on the top

to prevent overheatng. Meanwhle, do not forget to apply some thermal paste on CPU

before nstallng the heat snk/cooler fan for better heat dsperson.

Follow the steps below to nstall the CPU & cooler correctly. Wrong nstallaton wll

cause the damage of your CPU & manboard.

Pull the lever sdeways away from

the socket. Make sure to rase the

lever up to a 90-degree angle.

1.

Look for the gold arrow of the CPU.

The gold arrow should pont as shown

n the pcture. The CPU can only t n

the correct orentaton.

2.

If the CPU s correctly nstalled, the

pns should be completely embedded

nto the socket and can not be seen.

Please note that any volaton of the

correct nstallaton procedures may

cause permanent damages to your

manboard.

3. Press the CPU down rmly nto the

socket and close the lever. As the

CPU s lkely to move whle the lever

s beng closed, always close the

lever wth your ngers pressng tghtly

on top of the CPU to make sure the

CPU s properly and completely

embedded nto the socket.

4.

En-10

MS-7693 Manboard

Poston the coolng set onto the

retenton mechansm.

Hook one end of the clp to hook

rst.

5. Then press down the other end of the

clp to fasten the coolng set on the

top of the retenton mechansm.

Locate the Fx Lever and lft up t .

6.

Fasten down the lever.7. Attach the CPU Fan cable to the CPU

fan connector on the manboard.

8.

Important

Whle dsconnectng the Safety Hook from the xed bolt, t s necessary to keep an

eye on your ngers, because once the Safety Hook s dsconnected from the xed

bolt, the xed lever wll sprng back nstantly.

Conrm that the CPU cooler has formed a tght seal wth the CPU before bootng

your system.

Please refer to the documentaton n the CPU cooler package for more detals about

CPU cooler nstallaton.

•

En-11

Englsh

Mountng Screw Holes

When nstallng the manboard, rst nstall the necessary mountng stands requred for

a manboard on the mountng plate n your computer case. If there s an I/O back plate

that came wth the computer case, please replace t wth the I/O backplate that came

wth the manboard package. The I/O backplate should snap easly nto the computer

case wthout the need for any screws. Algn the mountng plate’s mountng stands wth

the screw holes on the manboard and secure the manboard wth the screws provded

wth your computer case. The locatons of the screw holes on the manboard are shown

below. For more nformaton, please refer to the manual that came wth the computer

case.

Important

Install the manboard on a at surface free from unnecessary debrs.

To prevent damage to the manboard, any contact between the manboard crcutry

and the computer case, except for the mountng stands, s prohbted.

Please make sure there are no loose metal components on the manboard or wthn

the computer case that may cause a short crcut of the manboard.

•

The I/O ports should be facng toward

the rear of the computer case. They

should lne up wth the holes on the

I/O backplate.

En-12

MS-7693 Manboard

Power Supply

JPWR1: ATX 24-pn Power Connector

Ths connector allows you to connect an ATX 24-pn power supply. To connect the ATX

24-pn power supply, algn the power supply cable wth the connector and rmly press

the cable nto the connector. If done correctly, the clp on the power cable should be

hooked on the manboard’s power connector.

13.+3.3

V

1.+3.3

V

14.-12V

2.+3.3

V

15.Ground

3

.Ground

16.PS-ON

#

4.+5

V

17.Ground

5

.Ground

18.Ground

6.+5

V

19.Ground

7

.Ground

22.+5

V

10.+12V

20.Res

8.PW

R O

K

23.+5

V

11

.+12V

21.+5

V

9.5VSB

24.Ground

12.+3.3

V

JPWR2: ATX 8-pn Power Connector

Ths connector provdes 12V power to the CPU.

7.+12V

3.Ground

5.+12V

1.

Ground

8.+12V

4

.Ground

6.+12V

2

.Ground

Important

Make sure that all the power cables are securely connected to a proper ATX power

supply to ensure stable operaton of the manboard.

En-13

Englsh

Memory

These DIMM slots are used for nstallng memory modules. For more nformaton on

compatble components, please vst http://www.ms.com/servce/test-report/

DDR3

240-pn, 1.5V

48x2=96 pn 72x2=144 pn

Dual-Channel mode Populaton Rule

In Dual-Channel mode, the memory modules can transmt and receve data wth two

data bus channels smultaneously. Enablng Dual-Channel mode can enhance system

performance. The followng llustratons explan the populaton rules for Dual-Channel

mode.

1

DIMM1

DIMM2

DIMM3

DIMM4

2

DIMM1

DIMM2

DIMM3

DIMM4

Important

DDR3 memory modules are not nterchangeable wth DDR2, and the DDR3 standard

s not backward compatble. Always nstall DDR3 memory modules n DDR3 DIMM

slots.

To ensure system stablty, memory modules must be of the same type and densty.

Due to chpset resource usage, the system wll only detect up to 31+ GB of memory

(not full 32 GB) when all DIMM slots have 8GB memory modules nstalled.

•

Installed

Empty

Page is loading ...

MSI MS-7693v3.0 Owner's manual

This manual is also suitable for

MSI MS-7693v3.0 Owner's manual

in other languages

Related papers

Other documents