© 2012 Baby’s Journey, Inc. Page 1
Pillowtop Changing Pad
User Guide Item 02000
Please read the following instructions and warnings carefully
Keep these instructions for future reference
WARNING
FALL HAZARD – To prevent death or serious injury, always keep child within arm’s reach.
Always secure this pad to the changing surface by correctly using fastening strap. See instructions.
Changing surface must be level, stable and structurally sound with a minimum surface dimension of
16 in x 32 in.
Read all instructions before use of the changing pad.
WARNING
FALL HAZARD – To prevent death or serious injury, always keep child within arm’s reach.
Always secure this pad to the changing surface by correctly using fastening strap. See instructions.
Changing surface must be level, stable and structurally sound with a minimum surface dimensions of
16 in x 32 in.
Do not use changing pad if it is damaged or broken.
Recommended maximum weight limit for use is up to 30 lb.
Adult assembly required.
Always use restraint system when using this product.
This pad is for use on a level, stable and structurally sound flat surface with a minimum dimension of
16 in. x 32 in. Use of this pad on a smaller surface could result in death of serious injury to your child
from falling. Follow all instructions on attaching and using the fastening strap.
© 2012 Baby’s Journey, Inc. Page 2
Attach the Changing Pad to the changing surface by using the following instructions:
1. Place Changing Pad on top of table or dresser with the fastening strap to the back of the
changing surface ensuring it does not hang over any edge. Make sure the back of the table
or dresser is clean and dry.
2. With the Changing Pad in position, attach the fastening strap to the back of the table or
dresser by peeling the backing from hook portion of attaching system and press firmly to the
back of the table or dresser.
3. Periodically check the fastening strap to ensure it remains tight and securely attached to
table or dresser.
4. To remove the pad from table or dresser, pull the hook and loop fastener apart. When
replacing the pad, fasten the hook and loop together and press firmly.
How to properly use the restraint system:
Position the infant on his back and centered on the changing pad, bring the safety strap around from
both sides of the pad so they align over his abdomen and buckle securely. The pinch guard should lie
against the body. To tighten the safety strap around your child pull the loose end of the safety strap
away from the buckle. To release the safety strap simply squeeze the buttons together on both sides
of the buckle. Never leave child unattended when using your Changing Pad, even with all straps
secured. Always keep one hand on the child to prevent falling.
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Other documents
-
DaVinci Baby M5925 User manual
-
DaVinci 11902 Assembly Instructions Manual
-
DaVinci Baby M4391 User manual
-
DaVinci Baby Piedmont 4-in-1 Crib and Changer Combo User manual
-
DaVinci Baby F14991 User manual
-
DaVinci Baby M4355 User manual
-
DaVinci Baby 13823 User manual
-
Dorel User manual
-
AFG W3358 User manual
-
Sorellle Presley Crib User manual
