Page is loading ...
AXM628E
INSTRUCTION MANUAL
MANUEL D'UTILISATION
HANDLEIDING
ISTRUZIONI OPERATIVE
BETRIEBSANLEITUNG
POKYNY K OBSLUZE
N
Á
VOD K OBSLUZE
Before operation please read these instructions thoroughly.
Avant de faire fonctionner l'appareil, Iisez bien toutes les instructions de ce manuel.
Deze intructies aandachtig doorlezen alvorens het toestel te gebuiken.
Leggere attentamente le istruzioni prima di usare l'apparecchio.
Lesen Sie bitte vor Inbetriebsnahme diese Gebrauchsanweisung aufmerksam durch.
Pred pou
z
i t
í
msid
o
kladone precitajte tieto pokyny.
Pred pou
z
i t
í
m si pros
i
m pec live prostudujte tyto pokyny.
DVD/CD MICRO SYSTEM
MICRO CHAINE CD/DVD
CD/DVD MICRO SYSTEEM
SISTEMA HI FI CD/DVD
CD/DVD MICRO-HIFISYSTEM
DVD/CD MIKRO SYSTEM
DVD/CD MIKROSYSTÉM
opening
Do not cover any vents and make sure that there is a space of several centimetres around
the unit for ventilation.
Index to Parts and Controls
Features
and scart output
Speaker System Set up
Connect the supplied speaker system using the supplied speaker cords by matching
the colours of the terminals.
Note:
Attach loudspeaker wires to the unit.
Left speaker:connect the red wire to
terminal L+” and connect the black wire“
to terminal “L-”.
Right speaker:connect the red wire to
terminal “R+” and connect the black wire
to terminal “R-”.
Avoid short circuiting your amplifier
Please ensure that the bare + and – wires don't touch each other when connected to the speaker
terminals, as your system may be damaged.
Note
Be sure to match the speaker cord to the appropriate terminal on the components:
+ to + and - to -.If the cords are reversed,the sound will be distorted and will lack of bass.
If you use speakers with low maximum input rating,adjust the volume carefully to avoid
excessive output on the speakers.
15
TV and Optional Component Set up
Required cords
Video connection wire for connecting a TV set(supplied)
Audio connection wire(Not included)
When connecting a wire,be sure to match the colour-coded
pins to the appropriate jacks on the components.
Note:
When using the S-VIDEO OUT jack instead of the VIDEO OUT jack for better picture clarity.
Your TV monitor must also be connected via a S-VIDEO INPUT jack.
When using the SCART OUT connector instead of the VIDEO OUT jack.
Your TV monitor must also be connected via a Scart socket.The Scart terminal contains separate
video signals and stereo audio signals.
You can connect the OPTICAL output to another amplifier with Dolby Digital decoder.
Do not connect the AC power socket
to the wall outlet before the system
connection is completed.
Connecting the AC Power Cord
Power Requirements: AC 230V,50Hz.
Note
Power that differs from above value will damage the system or cause the system to work abnormally.
Before connecting the AC power cord(main lead) of this system to a wall outlet,connect the speakers to the system.
Connect the AC power cords(main leads) of your TV,optional components to a wall outlet.
Yellow Yellow
Red
White
Red
White
16
/