Intermatic IG1C3R Supplementary Manual

Isolated Loop Circuit Protector

when used with one or more IG1CM Modules

Model IG1C3R

UL497B 90 VDC Breakdown

SURGE PROTECTION

INTERMATIC INCORPORATED

SPRING GROVE, ILLINOIS 60081

154IG24461

Route coaxial cables through knockout located in the bottom

section of the enclosure. Connect the incoming (unprotected)

cable to the upper threaded connector on the IG1C module.

Connect the protected cable (to the equipment) to the lower

threaded connector of the module.

Repeat for each set of coaxial cables to be protected.

IN (unprotected)

OUT (protected)

IN (unprotected)

Optional

Modules

LISTED

27TM