Sony VGN-FZ31Z Troubleshooting guide

Category
Notebooks
Type
Troubleshooting guide
Documentation
The following documents are included with your Sony VAIO
®
computer.
Non-Printed Documentation
Important
User Guide
Explains features of your computer. It also includes information about
the software programs included with your computer, as well as
information on solving common problems. User Guide is provided in
the PDF format, which you can easily browse through and print out.
To view the on-screen guide:
1 Double-click the VAIO User Guide icon on the desktop.
2 Open the folder for your language.
3 Select the guide you want to read.
Specifications
The online specifications describe the hardware and software
configurations of your VAIO computer.
To view the online specifications:
1 Connect to the Internet.
2 Go to the Sony online support Web site at
http://www.vaio-link.com.
It is strongly recommended to create recovery discs immediately after
your computer is ready for use because there are no recovery discs
provided with the computer.
For instructions on how to create the recovery discs, see “Creating your
own recovery discs” on page 18.
Printed Documentation
Quick Start Guide
Describes the process from unpacking to starting up your VAIO.
Troubleshooting and Recovery Guide (this booklet)
Contains solutions to common problems and computer malfunctions,
an explanation of how to make a backup copy of your data and
recover your computer system, and sources of support information.
Regulations, Warranty, EULA and Service Support
Contains Sony guarantee conditions, safety / regulations,
modem regulations, wireless LAN regulations,
wireless WAN regulations, Bluetooth regulations,
end user software license agreement, and
Sony support services information.
3
Contents
Documentation ....................................................................2
Printed Documentation.......................................................................... 2
Non-Printed Documentation .................................................................. 2
Important ............................................................................................... 2
Introduction to this guide .....................................................5
Troubleshooting
Troubleshooting...................................................................8
Computer............................................................................................... 8
What should I do if my computer does not start?............................ 8
What should I do if a BIOS error appears
when I turn on my computer? .................................................. 9
What should I do if the power indicator (Green) lights
but my screen remains blank?................................................. 9
What should I do if my computer or software
stops responding? ................................................................. 10
What should I do if the battery indicator is flashing
and my computer does not start? .......................................... 10
What should I do if a message window, notifying of
incompatibility or improper installation of the battery pack,
appears and my computer enters Hibernate mode? ............. 11
What should I do if Windows does not start,
showing a message, when I start my computer? .................. 11
What should I do if I cannot remember the BIOS password? ....... 12
System Security................................................................................... 13
How can I protect my computer against security threats,
such as viruses?.................................................................... 13
How do I keep my antivirus software updated? ............................ 13
4
Recovering your VAIO system
Before using your computer.............................................. 16
Creating your own recovery discs........................................................ 18
To create recovery discs ............................................................... 19
Backing up and restoring your data using
Backup and Restore Center ......................................................... 20
To back up your data..................................................................... 20
To create a restore point ............................................................... 25
Backing up and restoring your data with the VAIO software................ 28
To back up your data with Rescue Data........................................28
To restore your data with VAIO Data Restore Tool ....................... 30
Restoring the preinstalled software or software drivers ....................... 31
To use Reinstall Programs or Drivers............................................ 31
Finding out what to do in case of computer malfunctions ...... 32
If your computer does not work properly..............................................32
If Windows starts ...........................................................................33
If Windows does not start .............................................................. 34
Recovering your VAIO system.......................................... 35
Before starting the recovery process ................................................... 35
Recovering your VAIO system when you can start Windows ..............37
To restore the C drive....................................................................37
To restore your entire computer system........................................38
Recovering your VAIO system when you cannot start Windows ......... 39
Changing the partition sizes ............................................. 40
About hard disk partitioning ................................................................. 40
Creating a hard disk partition ...............................................................40
To create a partition with the Windows feature ............................. 41
To create a partition with recovery discs ....................................... 41
Erasing everything on your hard disk ............................... 42
Erasing all of your data on your hard disk with
Wipe and Erase Data ...................................................................42
Introduction to this guide
5
Introduction to this guide
This guide covers the following important areas:
If you have any problems with your VAIO
®
computer, solutions are
offered in this booklet in the form of a troubleshooting guide. See
“Troubleshooting” on page 8.
There are more troubleshooting topics on the Sony online support
Web site. Go to http://www.vaio-link.com.
Always read these sections before contacting VAIO-Link or your local
Sony dealer directly.
You can also search for more information by using Windows Help and
Support. Windows Help and Support is a comprehensive resource for
practical advice, tutorials, and demonstrations to help you learn to use
your computer. Use the Search feature, Index, or table of contents to
view all Windows Help resources, including those that are on the
Internet.
To access Windows Help and Support, click Start and Help and
Support. Or go to Windows Help and Support by pressing and holding
the Microsoft Windows key and pressing the F1 key.
An important part of using your computer is being able to perform a
recovery of the system and applications. This booklet explains everything
you need to know about recovering your system. It is very important that
you read this section before using your computer, and always before
attempting to make a recovery of any kind. See
“Before using your
computer” on page 16.
Troubleshooting
8
Troubleshooting
Computer
What should I do if my computer does not start?
Make sure your computer is securely plugged into a power source and
turned on. Make sure the power indicator shows the power is on.
Make sure the battery pack is installed properly and charged.
Make sure the floppy disk drive (if applicable) is empty.
If your computer is plugged into a power strip or an uninterruptible power
supply (UPS), make sure the power strip or UPS is plugged into a power
source and turned on.
If you are using an external display, make sure it is plugged into a power
source and turned on. Make sure the brightness and contrast controls
are adjusted correctly. See the manual that came with your display for
more information.
Disconnect the AC adapter and remove the battery pack. Wait three to
five minutes. Reinstall the battery pack, reconnect the AC adapter, and
then press the power button to turn on your computer.
Condensation may cause your computer to malfunction. If this occurs, do
not use the computer for at least one hour.
On all models except VGN-TZ series models, remove any extra memory
modules you may have installed since purchase.
Check that you are using the supplied Sony AC adapter. For your safety,
use only the genuine Sony rechargeable battery pack and AC adapter,
which are supplied by Sony for your VAIO computer.
Troubleshooting
9
What should I do if a BIOS error appears when I turn
on my computer?
If the message “Press <F1> to resume, <F2> to setup” appears at the bottom
of the screen, follow these steps:
1 Press the F2 key.
The BIOS setup screen appears. If not, restart the computer and press
the F2 key several times when the VAIO logo appears.
2 Set the date (month/day/year). Press the Enter key.
3 Press the m key to select System Time, and then set the time (hour:
minute: second). Press the Enter key.
4 Press the , key to select the Exit tab, and then press the F9 key.
At the confirmation prompt, press the Enter key.
5 Select Exit Setup, and press the Enter key.
At the confirmation prompt, press the Enter key.
Your computer restarts.
If this occurs frequently, contact VAIO-Link.
What should I do if the power indicator (Green)
lights but my screen remains blank?
Follow these steps:
1 Press and hold the power button for more than four seconds to check that
the power indicator goes out. Then turn on your computer again.
2 If your computer screen still remains blank, unplug the AC adapter,
remove the battery pack, and leave the computer for about a minute.
Then reinstall the battery pack, plug in the AC adapter, and turn on the
computer again.
10
What should I do if my computer or software stops
responding?
If your computer stops responding while a software application is
running, press the Alt+F4 keys to close the application window.
If the Alt+F4 keys do not work, click Start, the arrow next to the Lock
button, and Shut Down to turn off your computer.
If your computer does not turn off, press the Ctrl+Alt+Delete keys and
click the arrow
next to the Shut down button and Shut Down.
If the Windows Security window appears, click Shut Down.
Turning off your computer with the Ctrl+Alt+Delete keys or the power button may
cause loss of unsaved data.
If your computer still does not turn off, press and hold the power button
until the computer turns off.
Remove the AC adapter and battery pack.
Try reinstalling the software.
Contact the software publisher or designated provider for technical
support.
What should I do if the battery indicator is flashing
and my computer does not start?
This issue could be due to the battery pack not being installed properly.
To resolve this issue, turn off your computer and remove the battery
pack. Then install the battery pack to the computer again. For details, see
the on-screen User Guide.
If the issue persists after performing the above, it means the installed
battery pack is not compatible. Remove the battery pack and contact
VAIO-Link.
Troubleshooting
11
What should I do if a message window, notifying of
incompatibility or improper installation of the battery
pack, appears and my computer enters Hibernate
mode?
This issue could be due to the battery pack not being installed properly.
To resolve this issue, turn off your computer and remove the battery
pack. Then install the battery pack to the computer again. For details, see
the on-screen User Guide.
If the issue persists after performing the above, it means the installed
battery pack is not compatible. Remove the battery pack and contact
VAIO-Link.
What should I do if Windows does not start, showing
a message, when I start my computer?
On all models except VGC-LM series, VGC-LT series, and
VGX-TP series models
If you enter a wrong power-on password three times consecutively, the Enter
Onetime Password message appears. If you enter a wrong power-on
password three times consecutively again, the System Disabled message
appears and Windows will not start. Press and hold the power button for
more than four seconds to check that the power indicator goes off. Wait for
10 or 15 seconds, then restart your computer and enter the correct
password. When entering the password, check that the Num lock indicator
and Caps lock indicator are off. If any are lit, press the Num Lk key or the
Caps Lock key to turn off the indicator before entering the password.
On VGC-LM series and VGC-LT series models
If you enter a wrong power-on password three times consecutively, the Enter
Onetime Password message appears and Windows will not start. Press and
hold the power button for more than four seconds to check that the power
indicator goes off. Wait for 10 or 15 seconds, then restart your computer and
enter the correct password. When entering the password, check that the
Num lock indicator and Caps lock indicator on the wireless keyboard are off.
If any are lit, press the Num Lk key or the Caps Lock key to turn off the
indicator before entering the password.
12
On VGX-TP series models
Make sure your computer does not have a "non-bootable" disc in the
optical disc drive.
If a non-bootable disc is in the drive, follow these steps:
1 Remove the disc.
2 Restart your computer and confirm that the Windows operating
system launches properly.
If you enter a wrong power-on password three times consecutively, the
Enter Onetime Password message appears and Windows will not start.
Press and hold the power button for more than four seconds to check that
the VAIO power indicator goes off. Wait for 10 or 15 seconds, then restart
your computer and enter the correct password. When entering the
password, check that the Num lock indicator and Caps lock indicator on
the wireless keyboard are off. If any are lit, press the Num Lock key or
the Caps Lock key to turn off the indicator before entering the password.
What should I do if I cannot remember the BIOS
password?
If you have forgotten the BIOS password, contact VAIO-Link to reset it.
A reset fee will be charged.
Troubleshooting
13
System Security
How can I protect my computer against security
threats, such as viruses?
The Microsoft Windows operating system is preinstalled on your computer.
The best way to protect your computer against security threats, such as
viruses, is to download and install the latest Windows updates regularly.
You can get important Windows updates by doing the following:
Your computer must be connected to the Internet before you can receive updates.
1 Connect to the Internet.
2 Double-click the Windows Security Alerts icon on the taskbar.
3 Follow the on-screen instructions to set up automatic or scheduled
updates.
How do I keep my antivirus software updated?
You can keep the Norton Internet Security software program current with
the latest updates from Symantec Corporation.
To download and install the latest security update
1 Click Start, All Programs, Norton 360, and Norton 360.
The Norton 360 main window appears.
2 Click the Tasks and Settings option.
3 Follow the on-screen instructions to select and download updates.
Recovering your VAIO system
16
Before using your computer
This booklet explains how to resolve problems, make a backup copy of your
data, and recover your Sony VAIO
®
computer system with the following
VAIO software applications and Windows features in case of computer
malfunctions.
VAIO Recovery Center
VAIO Recovery Center contains the following VAIO software
applications, tools, and Windows features:
Rescue Data
The Rescue Data software enables you to make a backup copy of
your data stored on your hard disk.
Wipe and Erase Data
The Wipe and Erase Data software enables you to erase all the data
on your hard disk.
VAIO Hardware Diagnostics
The VAIO Hardware Diagnostics software enables you to check
your computer hardware (a CPU, memory module, hard disk, etc.).
Reinstall Programs or Drivers
The Reinstall Programs or Drivers program enables you to restore
the preinstalled software or software drivers to the original factory
condition.
Restore C: Drive
The Restore C: Drive program enables you to restore the C drive on
your computer to the original factory condition.
Restore Complete System
The Restore Complete System program enables you to restore
your entire computer system to the original factory condition.
Create Recovery Discs
The Create Recovery Discs program enables you to create your
own recovery discs to recover your computer system.
Backup and Restore Center
Backup and Restore Center is the Windows backup feature that
enables you to use the backup related capabilities.
VAIO Data Restore Tool
The VAIO Data Restore Tool software enables you to restore the
backup copies made with the Rescue Data software.
Before using your computer
17
Important information
If you perform a recovery of your system after having upgraded to a higher
version of Windows Vista via Windows Anytime Upgrade, the original
operating system will be running again on your computer. If you want to
reinstall the operating system installed with Windows Anytime Upgrade,
you can order a Windows Anytime Upgrade disc
*
at the following webshop:
https://vaio.windowsanytimeupgrade-emea.com/WAU/Home.aspx.
*
Shipping costs will be charged.
In case of virus attacks, computer malfunctions, or accidental erasure,
prepare the following in advance:
1 Recovery discs
It is strongly recommended to create recovery discs immediately after
your computer is ready for use because there are no recovery discs
provided with the computer. For instructions on how to create the
recovery discs, see “Creating your own recovery discs” on page 18.
2 Backup copy of your data
Recovering your computer system will delete all the data previously
stored on a hard disk. Be sure to make a backup copy of your data
before recovering the computer system. For instructions on how to
make a backup copy of the data, see “Backing up and restoring your
data using Backup and Restore Center” on page 20.
18
Creating your own recovery discs
Recovery discs enable you to recover your computer system to its original
state. You can create the recovery discs with VAIO Recovery Center.
Recover the computer system in the following cases:
Your computer has been infected with a computer virus.
Your computer has been unstable.
Your computer system is experiencing problems which cannot be solved
through troubleshooting.
You have formatted the C drive on your computer by mistake.
Depending on your computer state, you may need recovery discs to recover
your computer system.
You may not be able to recover your computer system from the recovery partition in the
following cases due to modifications of the recovery partition.
You have used software to modify the recovery partition.
You have installed an operating system different from the preinstalled operating
system on your computer.
You have formatted your hard disk without using VAIO Recovery Center.
In these cases, recover your computer system with the recovery discs. If you have not yet
created them, you need to purchase them or repair the computer at your expense.
Before using your computer
19
To create recovery discs
When your computer is ready for use, follow these steps to create recovery
discs.
1 Click Start, All Programs, VAIO Recovery Center, and
VAIO Recovery Center.
The User Account Control window appears.
2 Click Continue.
If you are currently logged onto your computer as a standard user, enter
an administrator name and password and click Continue.
The VAIO Recovery Center window appears.
3 Click Create Recovery Discs and Start.
4 Follow the on-screen instructions.
You can confirm the number of necessary discs and types of media you can use for
recovery disc creation in the Choose your media window.
If there is not enough free space on the hard disk drive, you cannot create recovery discs.
Note that you cannot use Blu-ray Disc™ media, DVD-RAM, CD-R, or CD-RW discs as
recovery discs. To find which types of media your optical disc drive supports, see the
on-screen User Guide.
Do not press the drive eject button while creating a recovery disc, as doing so may result
in a failure of the process.
20
Backing up and restoring your data using
Backup and Restore Center
You can make a backup copy of your data, restore the data, and create a
restore point using Backup and Restore Center.
To back up your data
Making a backup copy of your data is extremely important. If you do not make
the backup copy, you will lose various data stored on your hard disk, such as
documents or pictures, due to unexpected events or computer viruses. It is
strongly recommended to make the backup copy on a daily basis.
There are three options to make a backup copy of your data.
Use the Back Up Files wizard.
You can make a backup copy of your data to a CD, DVD or removal
media, such as an external hard disk. For instructions on how to use the
Back Up Files wizard, see
“To make a backup copy of your file with the
Back Up Files wizard” on page 21.
Use the Windows Complete PC Backup and Restore feature
(available on models with Windows Vista Ultimate or
Windows Vista Business only).
You can make a backup copy of everything on your computer including
the programs, system settings, and files on the computer. You can
restore your computer system to the state when you made the backup
copy. For instructions on how to use the Windows Complete PC
Backup and Restore, see
“To make a backup copy of your file with the
Windows Complete PC Backup and Restore feature” on page 23.
Create a restore point.
Your computer may become unstable or slow after installing new
software or changing the Windows settings. In such cases, you can use
a restore point to restore your computer system to a previous state. For
instructions on how to create a restore point, see
“To create a restore
point” on page 25.
If an optical disc drive is not installed on your computer, you need an external hard disk
drive or optical disc drive to make a backup copy of your data or need to create a new
partition by changing the size of the C drive. For instructions on how to create a hard disk
partition, see
“Creating a hard disk partition” on page 40.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44

Sony VGN-FZ31Z Troubleshooting guide

Category
Notebooks
Type
Troubleshooting guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI