RP1179BK
OWNER’S GUIDE
OWNER’S GUIDE
12-Volt
METAL FAN
METAL FAN
With Swivel-Ball Base
With Swivel-Ball Base
ONEYEAR LIMITED WARRANTY
For warranty information visit our web site:
roadproonthego.com
GARANTIE LIMITÉE DE UN AN
Pour des renseignements concernant la garantie,
visitez notre site Web au : www.roadproonthego.com
TECHNICAL SUPPORT / SOUTIEN TECHNIQUE
1-866-622-7979 Monday through Friday 9:00AM - 4:00PM, EST
1-866-622-7979, lundi à vendredi, 9 h - 16 h, HNE.
www.roadproonthego.com [email protected]
RP1179BK_R1_F0_OG.indd 1 9/26/13 12:13 PM
IMPORTANT SAFEGUARDS
• Never install this or any other vehicle accessory on or near air-bags.
• To protect against electrical hazards, do not immerse cord, plug, or unit in water or other liquid.
• Close supervision is necessary when used by or near children.
• Unplug unit when not in use.
• Do not operate if cord is damaged; inspect cord regularly.
• Do not use unit for applications other than its intended use.
• Never wrap cord around unit as this may damage cord.
• Never use AC current to power this unit.
• Use only when vehicle is running to avoid draining battery.
MOUNTING INSTALLATION
• Pick a suitable location for installation making sure the fan will not interfere with vision
or become a safety hazard.
• Drill three 1/8" holes into the vehicle body matching the foot plate of fan.
• Secure foot plate with tapping screws included.
• Insert the included cushion between the plate and body.
• Connect to your vehicle’s 12-volt power port.
SAFETY TIPS
• Use caution when using the unit.
• Never place ngers in grate while running (keep away from children).
• Unplug unit before cleaning.
OPERATION
• Mount fan in desired location.
• Ensure the switch is set to Off.
• Adjust fan to desired position.
• Plug fan into a 12-volt power port, and switch on.
CARE
• When cleaning fan make sure unit is unplugged.
• Use a damp cloth to clean fan.
TROUBLESHOOTING
• If unit does not operate, check that the power supply is working properly.
• Check that all cords are connected properly.
RP1179BK_R1_F0_OG.indd 2 9/26/13 12:13 PM
IMPORTANT SAFEGUARDS
• Never install this or any other vehicle accessory on or near air-bags.
• To protect against electrical hazards, do not immerse cord, plug, or unit in water or other liquid.
• Close supervision is necessary when used by or near children.
• Unplug unit when not in use.
• Do not operate if cord is damaged; inspect cord regularly.
• Do not use unit for applications other than its intended use.
• Never wrap cord around unit as this may damage cord.
• Never use AC current to power this unit.
• Use only when vehicle is running to avoid draining battery.
MOUNTING INSTALLATION
• Pick a suitable location for installation making sure the fan will not interfere with vision
or become a safety hazard.
• Drill three 1/8" holes into the vehicle body matching the foot plate of fan.
• Secure foot plate with tapping screws included.
• Insert the included cushion between the plate and body.
• Connect to your vehicle’s 12-volt power port.
SAFETY TIPS
• Use caution when using the unit.
• Never place ngers in grate while running (keep away from children).
• Unplug unit before cleaning.
OPERATION
• Mount fan in desired location.
• Ensure the switch is set to Off.
• Adjust fan to desired position.
• Plug fan into a 12-volt power port, and switch on.
CARE
• When cleaning fan make sure unit is unplugged.
• Use a damp cloth to clean fan.
TROUBLESHOOTING
• If unit does not operate, check that the power supply is working properly.
• Check that all cords are connected properly.
RP1179BK_R1_F0_OG.indd 3 9/26/13 12:13 PM
RoadPro® is a registered trademark of /
est une marque enregistrée de DAS Companies, Inc.
©2013 DAS Companies, Inc. and/or its afliates.
©2013 DAS Companies, Inc. et/ou ses liales.
Distributed by / Distribué par
RoadPro 1875 Zeager Road
Elizabethtown, PA 17022
RP1179BK_R1_F0_OG.indd 4 9/26/13 12:13 PM
/
