Buick 2006 Rendezvous, Rendezvous, Rendezvous 2006 Owner's manual

  • Hello! I am an AI chatbot trained to assist you with the Buick 2006 Rendezvous Owner's manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Seats and Restraint Systems
........................... 1-1
Front Seats
............................................... 1-3
Rear Seats
............................................... 1-8
Safety Belts
............................................. 1-22
Child Restraints
....................................... 1-45
Airbag System
......................................... 1-72
Restraint System Check
............................ 1-87
Features and Controls
..................................... 2-1
Keys
........................................................ 2-3
Doors and Locks
....................................... 2-8
Windows
................................................. 2-13
Theft-Deterrent Systems
............................ 2-15
Starting and Operating Your Vehicle
........... 2-19
Mirrors
.................................................... 2-31
OnStar
®
System
...................................... 2-32
Universal Home Remote System
................ 2-34
Storage Areas
......................................... 2-38
Sunroof
.................................................. 2-46
Vehicle Personalization
............................. 2-47
Instrument Panel
............................................. 3-1
Instrument Panel Overview
.......................... 3-4
Climate Controls
...................................... 3-28
Warning Lights, Gages, and Indicators
........ 3-37
Message Center
....................................... 3-51
Driver Information Center (DIC)
.................. 3-60
Audio System(s)
....................................... 3-74
Driving Your Vehicle
....................................... 4-1
Your Driving, the Road, and Your Vehicle
..... 4-2
Towing
................................................... 4-36
Service and Appearance Care
.......................... 5-1
Service
..................................................... 5-3
Fuel
......................................................... 5-4
Checking Things Under the Hood
................. 5-9
All-Wheel Drive
........................................ 5-43
Bulb Replacement
.................................... 5-44
Windshield Replacement
........................... 5-49
Windshield Wiper Blade Replacement
......... 5-49
Tires
...................................................... 5-51
Appearance Care
..................................... 5-91
Vehicle Identification
................................. 5-99
Electrical System
.................................... 5-100
Capacities and Specifications
................... 5-106
Maintenance Schedule
..................................... 6-1
Maintenance Schedule
................................ 6-2
Customer Assistance and Information
.............. 7-1
Customer Assistance and Information
........... 7-2
Reporting Safety Defects
........................... 7-13
Index
................................................................ 1
2006 Buick Rendezvous Owner Manual M
GENERAL MOTORS, GM, the GM Emblem, BUICK,
the BUICK Emblem, and the name RENDEZVOUS are
registered trademarks of General Motors Corporation.
This manual includes the latest information at the time
it was printed. We reserve the right to make changes
after that time without notice. For vehicles first sold
in Canada, substitute the name “General Motors
of Canada Limited” for Buick Motor Division whenever
it appears in this manual.
Keep this manual in the vehicle, so it will be there if it
is needed while you are on the road. If the vehicle
is sold, leave this manual in the vehicle.
Canadian Owners
A French language copy of this manual can be obtained
from your dealer or from:
Helm, Incorporated
P.O. Box 07130
Detroit, MI 48207
About Driving Your Vehicle
As with other vehicles of this type, failure to operate this
vehicle correctly may result in loss of control or an
accident. See Your Driving, the Road, and Your Vehicle
on page 4-2.
How to Use This Manual
Many people read the owner manual from beginning to
end when they first receive their new vehicle. If this
is done, it can help you learn about the features
and controls for the vehicle. Pictures and words work
together in the owner manual to explain things.
Litho in U.S.A.
Part No. 06RENDEZVOUS A First Printing
©
2005 General Motors Corporation. All Rights Reserved.
ii
Index
A good place to quickly locate information about the
vehicle is the Index in the back of the manual. It is
an alphabetical list of what is in the manual and
the page number where it can be found.
Safety Warnings and Symbols
There are a number of safety cautions in this book. We
use a box and the word CAUTION to tell about things
that could hurt you if you were to ignore the warning.
{CAUTION:
These mean there is something that could hurt
you or other people.
In the caution area, we tell you what the hazard is.
Then we tell you what to do to help avoid or reduce
the hazard. Please read these cautions. If you do not,
you or others could be hurt.
You will also find a circle
with a slash through it
in this book. This safety
symbol means “Do
Not,” “Do Not do this” or
“Do Not let this happen.”
iii
Vehicle Damage Warnings
Also, in this manual you will find these notices:
Notice: These mean there is something that could
damage your vehicle.
A notice tells about something that can damage the
vehicle. Many times, this damage would not be covered
by your vehicle’s warranty, and it could be costly. But
the notice will tell what to do to help avoid the damage.
When you read other manuals, you might see
CAUTION and NOTICE warnings in different colors
or in different words.
There are also warning labels on the vehicle.
They use the same words, CAUTION or NOTICE.
Vehicle Symbols
The vehicle has components and labels that use
symbols instead of text. Symbols are shown along
with the text describing the operation or information
relating to a specific component, control, message,
gage, or indicator.
If you need help figuring out a specific name of a
component, gage, or indicator, reference the
following topics:
Seats and Restraint Systems in Section 1
Features and Controls in Section 2
Instrument Panel Overview in Section 3
Climate Controls in Section 3
Warning Lights, Gages, and Indicators in Section 3
Audio System(s) in Section 3
Engine Compartment Overview in Section 5
iv
These are some examples of symbols that may be found on the vehicle:
v
NOTES
vi
Front Seats ......................................................1-3
Manual Seats ................................................1-3
Six-Way Power Seats .....................................1-4
Manual Lumbar ..............................................1-5
Heated Seats .................................................1-5
Reclining Seatbacks ........................................1-6
Head Restraints .............................................1-8
Rear Seats .......................................................1-8
Rear Seat Operation .......................................1-8
Split Bench Seats ...........................................1-8
Captain Chairs .............................................1-14
Stowable Seat ..............................................1-18
Safety Belts ...................................................1-22
Safety Belts: They Are for Everyone ................1-22
Questions and Answers About Safety Belts ......1-26
How to Wear Safety Belts Properly .................1-27
Driver Position ..............................................1-27
Shoulder Belt Height Adjustment .....................1-35
Safety Belt Use During Pregnancy ..................1-36
Right Front Passenger Position .......................1-36
Rear Outside Passenger Positions ..................1-36
Center Rear Passenger Position .....................1-40
Rear Safety Belt Comfort Guides ....................1-42
Safety Belt Pretensioners ...............................1-45
Safety Belt Extender .....................................1-45
Child Restraints .............................................1-45
Older Children ..............................................1-45
Infants and Young Children ............................1-48
Child Restraint Systems .................................1-51
Where to Put the Restraint .............................1-54
Lower Anchors and Tethers for
Children (LATCH) ......................................1-55
Securing a Child Restraint in a
Rear Outside Seat Position .........................1-65
Securing a Child Restraint in the
Center Rear Seat Position ..........................1-67
Securing a Child Restraint in the
Right Front Seat Position ............................1-69
Section 1 Seats and Restraint Systems
1-1
Airbag System ...............................................1-72
Where Are the Airbags? ................................1-75
When Should an Airbag Inflate? .....................1-77
What Makes an Airbag Inflate? .......................1-79
How Does an Airbag Restrain? .......................1-79
What Will You See After an
Airbag Inflates? .........................................1-80
Passenger Sensing System ............................1-81
Servicing Your Airbag-Equipped Vehicle ...........1-85
Adding Equipment to Your Airbag-Equipped
Vehicle ....................................................1-86
Restraint System Check ..................................1-87
Checking the Restraint Systems ......................1-87
Replacing Restraint System Parts
After a Crash ............................................1-88
Section 1 Seats and Restraint Systems
1-2
Front Seats
Manual Seats
{CAUTION:
You can lose control of the vehicle if you try to
adjust a manual driver’s seat while the vehicle
is moving. The sudden movement could startle
and confuse you, or make you push a pedal
when you do not want to. Adjust the driver’s
seat only when the vehicle is not moving.
Your vehicle may have manual seats.
Use the lever located
under the front of the
seat to adjust the seat
forward or rearward.
Pull the lever up to unlock the seat. Slide the seat to
where you want it and release the lever. To make
sure the seat is locked into place, try to move the
seat back and forth with your body.
1-3
Six-Way Power Seats
If your vehicle has this
feature, the power seat
control is located on
the outboard side of
the seat(s).
Move the front of the control up or down to adjust
the front portion of the seat up or down.
Move the rear of the control up or down to adjust
the rear portion of the seat up or down.
Slide the control forward or rearward to move the
seat forward or rearward.
1-4
Manual Lumbar
The knob that controls
this feature is located
on the outboard sides of
the driver’s and front
passenger’s seats.
Turn the knob toward the front of the vehicle to increase
lumbar support. Turn the knob toward the rear of the
vehicle to decrease lumbar support.
Heated Seats
Your vehicle may
have heated seats.
If it does, the heated
seat switches are
located in the instrument
panel switchbank.
This feature will quickly heat the seat cushions and
lower back of the driver’s and front passenger’s seat.
The left switch is for the driver’s seat and the right switch
is for the front passenger’s seat.
Press the top of the switch to turn the heater on.
Press the bottom of the switch to turn the heater off.
The heated seat switch will turn off when the ignition is
turned to OFF and will resume operation when the
ignition is turned to ON, unless the switch is turned off.
1-5
Reclining Seatbacks
To adjust a seatback, pull up on the lever located on
the outboard side of the driver’s or front passenger’s
seats. Release the lever to lock the seatback where
you want it. Push and pull on the seat to make sure
it is locked into position.
{CAUTION:
If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
push and pull on the seatback to be sure it
is locked.
Pull up on the lever, and the seat will go to its original
upright position.
1-6
Do not have a seatback reclined if your vehicle
is moving.
{CAUTION:
Sitting in a reclined position when your vehicle
is in motion can be dangerous. Even if you
buckle up, your safety belts cannot do their
job when you are reclined like this.
The shoulder belt cannot do its job because it
will not be against your body. Instead, it will be
in front of you. In a crash, you could go into it,
receiving neck or other injuries.
The lap belt cannot do its job either. In a crash,
the belt could go up over your abdomen. The
belt forces would be there, not at your pelvic
bones. This could cause serious internal
injuries.
For proper protection when the vehicle is in
motion, have the seatback upright. Then sit
well back in the seat and wear your safety
belt properly.
1-7
Head Restraints
Adjust your head restraint so that the top of the restraint
is closest to the top of your head. This position
reduces the chance of a neck injury in a crash.
The head restraints are adjustable. Slide the head
restraint up or down to adjust it.
Rear Seats
Rear Seat Operation
The rear seats in your vehicle have seat operating
features to adjust, fold, remove and reinstall the
seats. By using the seat operating procedures, in the
correct order, you can easily remove the seats from
your vehicle.
When you put the seats back in the vehicle, be sure
to follow the label on the back of the seat for proper
location.
Split Bench Seats
If your vehicle has the split bench seat, the seatbacks
can be folded forward or reclined individually and
the sections can be flipped forward or removed
individually.
1-8
Folding or Reclining the Seatbacks
{CAUTION:
If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
push and pull on the seatback to be sure it
is locked.
To recline the seatback
on base-level split bench
seats, lift up on the
recliner lever located
on the outboard side
of the seatback.
To recline the seatback on
up-level split bench seats,
push forward on the
recliner lever located on
the outboard side of
the seatback.
Move the seatback to the desired position.
It is easier to raise or lower the seatback if you lean
forward and take the weight off the seatback.
The seatbacks on each section also fold forward to put
items behind the seats.
Lift up or push forward on the recliner lever and fold
the seatback forward. The seatback will lock into place
when you push it back to the upright position.
After raising a seatback to an upright position, push and
pull on the seatback to check that it is locked upright.
Base-Level
Up-Level
1-9
Removing the Split Bench Seat
Each section of the split bench seat can be flipped
forward or removed individually.
1. Unlatch the shoulder belt from the lap-belt.
2. Make sure that the seatback is in the upright
position.
3. Lift up or push forward on the seatback recliner
lever to fold the seatback forward.
4. For base-level split bench seats, pull the lever
at the base of the seat on the outboard side to
release the rear latches from the floor pins and
flip the seat forward.
Base-Level
1-10
For up-level split bench
seats, continue pushing
forward on the recliner
lever to release the
rear latches from the
floor pins and flip the
seat forward.
5. To release the front latches, squeeze the angled
latch release bar toward the straight crossbar.
6. Remove the seat by rocking it slightly toward the
rear of the vehicle and then pulling it out.
Repeat these steps for the other section of the split
bench seat.
1-11
Replacing the Split Bench Seat
{CAUTION:
If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
push and pull on the seatback to be sure it
is locked.
{CAUTION:
A seat that is not locked into place properly
can move around in a collision or sudden
stop. People in the vehicle could be injured.
Be sure to lock the seat into place properly
when installing it.
{CAUTION:
A safety belt that is improperly routed, not
properly attached, or twisted will not provide
the protection needed in a crash. The person
wearing the belt could be seriously injured.
After installing the seat, always check to be
sure that the safety belts are properly routed
and attached, and are not twisted.
Make sure that the seatback is in the folded forward
position and that the safety belts are on the correct
section of the seat.
Don’t put the sections of the bench seat in so that they
face rearward because they won’t latch that way.
The split bench seat sections have seat position labels,
located on the back of each section, showing where
the section must go.
The seat must be placed in the proper location for the
legs to attach correctly.
1-12
1. Squeeze the angled latch release bar toward the
straight crossbar while placing the front hooks of
the bench seat onto the front two floor pins.
2. Make sure that the
bench seat is angled
so that the front
hooks clear the floor
pins. If the front
legs are not attached
correctly, the rear
legs will not attach
to the rear set of
floor pins.
1-13
3. Firmly push the rear hooks onto the rear floor pins
by pushing down on the rear of the seat.
4. Try to raise the seat to check that it is locked down.
5. Lift the seatback recliner lever and raise the
seatback until it locks upright.
6. Push and pull on the seatback to check that it is
locked upright.
7. Attach the lap belt.
Captain Chairs
If your vehicle has captain’s chairs, the chairs and
seatbacks can be adjusted forward or rearward.
Adjusting the Captain’s Chairs
(Second Row)
To adjust the second row captain’s chairs, use the
adjustment bar located below the front of each seat.
Lift up the lever to slide the seat forward or rearward.
Release the lever. Push and pull on the seat to
make sure it is locked into place.
Folding or Reclining the Seatbacks
{CAUTION:
If the seatback is not locked, it could move
forward in a sudden stop or crash. That could
cause injury to the person sitting there. Always
push and pull on the seatback to be sure it
is locked.
1-14
/