Kodak 32HDX900s User manual

Brand: Kodak

Model: 32HDX900s

Category: LCD TVs

Type: User manual

This manual is also suitable for

Kodak 32HDX900s is a high definition LED TV with a range of features to enhance your viewing experience. Connect your external devices, such as DVD players or gaming consoles, to the AV and HDMI inputs. The USB port allows you to view media directly from a USB drive, and you can even record your favorite shows with the PVR function. With its sleek design and user-friendly interface, the Kodak 32HDX900s is the perfect addition to any home.

I M P O R TA N T

Please read this manual carefully before installing and operating the TV.

Please keep this manual with you for further reference

User Manual

24HDX900s

32HDX900s

40FHDX900s

LED TV

HIGH DEFINITION

CONTENTS

INTRODUCTION

WARNING AND SAFETY PRECAUTIONS

TV BRACKET ASSEMBLY

DESKTOP TV BRACKET INSTALLATION & ASSEMBLY

ANTENNA AND EXTERNAL CONNECTION EQUIPMENT

NAME AND FUNCTIONS OF CONTROL ON SET

BATTERY INSTALLATION

NAME AND FUNCTION OF CONTROLS ON REMOTE

PICTURE MENU

SOUND MENU

TIMER MENU

OPTION MENU

CHANNEL MENU

HOTEL MODE

MEDIA

MEDIA PHOTO

MEDIA MUSIC

MEDIA MOVIE

MEDIA TEXT

USB TO USB Copy

USB FORMAT

TECHNICAL SPECIFICATIONS

TROUBLE SHOOTING

10.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

23.

3-4

4-5

5-6

9-10

19-20

2. WARNINGS AND SAFETY PRECAUTIONS

Thank you for choosing our product. You can use it as a color television or as a PC

monitor. To be able to make use of all application options, we recommend that you

should read this operation manual carefully and keep it somewhere you have quick

access to, if required.

Do not touch any parts in the set and do not make changes to any settings not described

in this operating manual.

The LED Screen is a high-tech product consisting of more than 9,00,000 control elements.

Any Non-active red, blue or green spots that might appear on the screen occasionally,

have no effect on the performance of the screen or television.

To prevent damage to the TV which may result in a fire or electrical shock hazard, do not

expose the TV set to rain or excessive moisture.

Do not rub or strike the Active matrix LED with any thing hard as this may scratch, mark

or damage the active matrix LED permanently.

For safety, do not place vessels or any container which contain fluid including water, on

or near the TV.

Do not insert any objects in the ventilation slots.

Do not remove the back cover of the set as this can expose you to very high voltage and

other hazards. If the set does not operate properly, unplug it and call service person.

Warning:

Service:

Connect the antenna cable to the socket marked ANT IN on the back cover. For

best reception an outdoor antenna should be used.

Antenna:

Position the set so that no bright light or sunlight falls directly on the screen.Reflections

on the screen affects the picture quality.

Soft and indirect lighting is recommended for comfortable viewing.

Care should be taken not to expose the set to any unnecessary vibration, moisture, dust

or heat.

Adequate ventilation is essential to prevent set failure.Ensure that the set is placed in a

position to allow a free flow of air. Do not cover ventilation opening on the back cover.

Do not place the set in an enclosure or very close to walls.

Avoid excessively warm locations to prevent possible damages to the set.

Place the television on a solid and flat surface.

Location:

1. INTRODUCTION

No warranty claims are accepted for damage caused due to incorrect handling.

This LED TV Set is designed to receive display video and audio signals and for use as

a PC monitor. Any other use is prohibited.

Despite the high quality of the television, random disturbances or interference may

cause occasional malfunctioning. In this case the correct function of the apparatus can

be restored by switching off the TV through the main On/Off button or removing the

main plug, then switch ON as soon as the LED light disappears.

Cautions.

Note:

For safety, remove the AC plug from the wall outlet before cleaning the set.

Clean the dust on set by wiping the screen and the cabinet with a soft, clean cloth. If the

screen requires additional cleaning, use a clean damp cloth. Do not use liquid cleaners

or aerosol cleaners or liquid containing benzol, petroleum or chemicals.

Cleaning:

Do not allow anything to rest upon or roll over the power cord, and do not place the set

where the power cord is subject to damage.

Remove the AC plug from the wall outlet when the TV set is not used for a prolonged

period of time.

In the event of thunder storms or power cuts please remove the main power plug and

aerial plug.

Unplug the set in case of abnormal operation e.g. smoke, odd sound or smells.

Use the main power cord provided for connecting the TV.

Power:

3. TV BRACKET ASSEMBLY

Fixing the LED TV on a wall

1. First, place the LED TV on a table smoothly and place a soft cloth on the table to avoid

scratching the screen.

2. Use a screw driver to take off the screws which are fixed on the bottom stand (Refer to Fig. 1,

direction of the arrows) and take out the bottom stand (please keep the screws and bottom

stand carefully)

Fig1

Fig1a

wall

3. Make one bracket which can be fixed on the wall according to the size of arrow direction of fig. 2 and fig. 3.

4. Drill four holes on the wall (the size is given only for reference) and fix the TV Wall Mount

bracket on the wall. (This is optional,you may place the tv using a table stand only)

5. Use a screwdriver to lock the screws in the wall mount bracket on the back of the TV,

then hang the TV on the wall.

NOTE:

The bracket fixed on the wall is an optional part.

When you fix wall mount on the TV, there should be no other articles on, around and front

of the TV and please keep a distance from any product hampering articles.

The fixing picture is only for reference.

Please follow the user manual about bracket assembly to fix the TV.

Attach the mounting bracket from the VESA compatible wall mounting kit, provided with the TV.

Fig2

Bracket

Cement bolt

Fig3

wall

3. TV BRACKET ASSEMBLY

(NOTE : For 20" Model the stand screws will be in bottom side.)

4. DESKTOP TV BRACKET INSTALLATION & ASSEMBLY

Note: Instruction manual for the TV stand assembly.

Step 1: Place the TV carefully on a table covered with a soft pad, this can prevent the LED

panel from being damaged.

Step 2: The Stand-base assembly (fig. 2) has to fit into female hole of the Stand-post properly.

SOFT PAD

TABLE

Fig.1

Fig.2

Step 3: Put the "Rotary-CVR plate " to the "Stand-base" in its way properly, and make sure

that the holes of "Stand-post" and "Rotary CVR plate " are aligned rightly. and then

use the screwdriver to fix them together with provided screws.

Step 4: assemble finished.

Fig.3

ROTARY-CVR PLATE

SCREW

AV INPUT1 / INPUT2

1.Connect the composite outputs (Video, L & R) of VCR/DVD Player to AV INPUT 1 / INPUT2.

2.1 Press the Input button on the remote to select AV1/AV2.

AV Input-1

L R

AV Input-2

5. ANTENNA AND EXTERNAL CONNECTION EQUIPMENT

NOTE : Selecting a Source

Remote Control :

Press Input button on the remote control to display' Input source OSD'. Then choose any source by

pressing Up/Down button and Press Enter to select it.

TV Control Panel :

Press Source button and choose any source by pressing Prog+ / - button and Press source

button again to select it.

4. DESKTOP TV BRACKET INSTALLATION & ASSEMBLY

5. ANTENNA AND EXTERNAL CONNECTION EQUIPMENT

AV output

AV OUTPUT

UP/Down

Connect/Insert standard USB pendrive. Select on source OSD by

pressing Input key, Press Left/ Right key on remote to choose

photo / Music / Movie /text. Similarly TV panel keys Prog +/-

can be used as Up/Down and Vol+/- for selecting media content

and Press Prog+ to select.

either of the 2

9 7 6 5 4 3

6. NAME AND FUNCTION OF CONTROLS ON SET

A) TV Control Panel Buttons

10.

IR SENSOR

LED INDICATOR

STANDBY

CH+

CH-

VOL+

VOL-

SOURCE (TV/AV)

AC POWER CORD.

11.

12.

13.

14.

15.

16.

17.

18.

19.

20.

21.

22.

AUDIO-L

AUDIO-R

EARPHONE

HDMI

VGA

PC AUDIO

YPbPr

AV OUTPUT

AV INPUT 1

AV INPUT 2

USB

B) CONNECTING YOUR UNIT:-

SOURCE MENU VOL PROG

Note:

Above sketches are just representation. Actual TV set may look differ than these sketches.

AC Power

Earphone

HDMI

VGA

PC AUDIO YPbPr

OUTPUT

16 17

AV INPUT-1

VIDEO L-AUDIO-R

AV INPUT-2

VIDEO L-AUDIO-R

USB

AUDIO-L AUDIO-R

11 12

7. BATTERY INSTALLATION

1. Remove the battery compartment door.

2. Insert two pieces of 1.5V size UM-4 "AAA" batteries or equivalent with the correct polarity as indicated

by (+) and (-) symbols.

3. Close battery compartment door.

NOTE: Replace batteries when they are exhausted or if the remote control is not to be used for a long

time.

BATTERY PRECAUTIONS:

Incorrect use of batteries can cause electrolyte leakage which will corrode the remote control or cause

the batteries to burst.

Replace both batteries at same time.

Don't Mix batteries type (alkaline with carbon ,zinc etc.)

POWER

FREEZE

S.MODE

P.MODE

FAV

FAV.

FAV+

Turns TV into STANDBY ON/OFF

Select to freeze the scene still on the screen.

Recalls / changes presetted sound settings.

Recalls / changes presetted picture settings.

Press to add or remove your favorite channels under TV menu.

Press to switch your favorite channels under TV menu.

-Navigates Vertically up/down through the Menu/Sub Menus

-To enter character/numbers in program name parameter

-To navigate channel up/down through valid channels.

-Navigates horizontally right/left through the Menu/sub Menus.

-To enter in Menu/Sub Menus and to adjust Vol +/-

-To navigate the letter in program name parameter

-To select the time

-Increase/decrease the value of selected items and set the parameter On/Off

ENTER

-To enter in sub menu.

-Enter to edit program name parameter.

Press to exit the OSD menu.

To select menu OSD window and return to upper menu.

Input source selection.

Select to increase or decrease volume.

Select to increase or decrease volume for power audio.

EXIT

INPUT

VOL +/-

PA +/-

This key provides different power saving modes. The current mode is displayed with

ecovision symbol on the screen. In audio only mode display is off and only audio is on. Press

any key to exit audio only mode. Note : VOL+/-, PA +/- and Mute can function even as

panel is off.

Turns sound OFF or ON

ECO

MUTE

Figures 0-9 are used to directly input channel number.

Press this key to enter the program number for different digit eg. -/--/---

1 2

7 8

-/--

Q.VIEW

Press this key to toggle between the current and the previous program you were watching.

-Press this key to save channels when manual tuning or to delete channel when editing TV

program in Program edit function.

-To set sleep timer except when in Program Edit Menu or USB mode

-To delete item selected in USB mode.

-Press this key to display sub title list

-Press this key to rename channels in program edit function

-In USB Mode, Info copy from USB 1 to USB 2 and Vicen versa

(only for 80cm &102cm LED TV Model)

NAMES AND FUNCTION OF CONTROLS ON REMOTE

Sub Title

Sleep

Delete

Copy

NAMES AND FUNCTION OF CONTROLS ON REMOTE

-Press this key to switch aspect ratio

-Press this key to skip channel in program edit function

Press this key to STOP in USB mode

Press this key to PLAY/PAUSE in USB mode

Press this key to fast reverse in USB mode

Press this key to fast forward in USB mode

Press this key to select play time position

When playing the Photo or Video or MP3 or Text, if you select ROOT key it wil

stop playing and return to the current list in USB mode.

Press this key to play the previous track.

Press this key to play the next track.

-Press this key to switch On/Off Internal speaker used in TV set.

-Press this key to swap channel in program edit function

Speaker

Aspect

GOTO

ROOT

9. PICTURE MENU

Picture Mode

Contrast /

Brightness / Color/

Sharpness / Tint

This function is used to select the preset picture setting

(Dynamic/Standard/Mild/User)

These settings are used to adjust the Contrast (0-100), Brightness (0-

100),Color (0-100), Sharpness (0-100) and Tint (0-100) Changes in

these settings should be done for fine adjustments of the picture.

Note: Tint is enabled for NTSC channels only.

Color Temperature

Use this option to select and change color temperature

(Normal/Warm/Cool/User).

Upon selecting user mode can be adjusted as per choice.

Red/Green/Blue settings and adjust color temperature of preference.

Aspect Ratio

You can adjust Aspect Ratio to have picture setting of your choice

(16:9/Panorama/Auto/4:3/14:9/Zoom/Cinema Zoom).

You can adjust Black Level Off/Dark/Darker/Darkest to get the

desired screen depth.

Black Tone

Adjust the screen contrast Off/Low/Medium/High

Adjust skin tone to your choice.

You can adjust Low/Middle/High/Auto/Off to reduce the noise by

applying noise reduction filters to video data

Dynamic Contrast

Flesh Tone

Noise Reduction

PICTURE

Dynamic Backlight

The backlight value can be varied (1-10). This function is used to

adjust level of panel

Ecovision

TV is in Normal state when this is off. To save power consumed by TV

select power saving modes Low/Mid/High/Audio Only. In Audio Mode,

only audio is on and picture is off. Volume, Power Audio and Mute

keys will work in Audio Mode Only. Press any key to exit Audio Mode Only.

Speaker

When set to On audio can be heard from internal TV speakers. When

set to Off internal TV speakers will close sound.

10. SOUND MENU

Sound Mode

Balance

Auto Volume

Surround Sound

SOUND

This function is used to select the preset sound modes

(Standard /Music /Movie/ Sports/ User)

User can select the left/right speaker intensity by changing balance

(-50 / +50)

When set to On, it will level out the sound being heard when sudden

changes in volume occur during commercial breaks or channel

changes.

Select Surround Sound On or Off to have spatial effect

Equilizer 120Hz, 500Hz, 1.5kHz, 5KHz and 10KHz can be adjusted by

user to get best sound setting of the choice.

11. TIMER MENU

TIME

Clock

Off Time

On Time

Sleep Timer

Auto Sleep

SOUND

Power Audio

Volume

You can connect any Home Theatre speakers to AV Output. Now TV

remote Power Audio Volume (PA +/-) can control sound of your music

system and also mute the sound.

Display the On Time and Date. Press Enter key to adjust Date,Month,

Year, Hour and Minute.

Adjust what time TV should enter standby mode.

Adjust what time TV should switch on from standby mode.

Select the time in minutes (10min to 240min) in which you want

the TV to shut off

If keep it ON,the TV will switch off after 10 min when no signal is

available.

TV Manual Tuning

Sound System: Select the sound system (DK/BG/MN/I)

Search: Press < to search down from the current frequency and press >

to search up.

Fine-Tune: Fine tunning the channel at which either picture or sound is

not clear even after Auto Searching

Storage To: Select the channel tuned to copy to other program number

CHANNEL

Programme Edit

User can edit the programs by Swap, Skip, Rename operation.

1. To Swap, Navigate to channel to be swapped (selected bar appears

on it) press yellow key on remote, navigate to another channel press

OK. Now press yellow key again on remote then these two channels are

will be swapped.

2. To Skip, Navigate to channel to be skipped (selected bar appears on

it ) press blue key on the remote. Channel is skipped. Repeat the

process to cancel skip.

3. To Delete, Navigate to channel to be deleted (selected bar appears

on it ) press red key on the remote. Channel is deleted.

4. To Rename, Navigate to channel to be rename (selected bar appears

on it ) press green key on remote. Now you navigate keys up and down

to enter word and move front and back to shift.

Favorite

Favorite channels can be selected by using the FAV key on the remote.

Navigate to a channel to be included in favorite list (selected bar

appears on it ) press FAV key. Heart sign appears with channel selected.

To Cancel repeat the operation again. After you select all favorite

channels you can use FAV- and FAV+ keys to watch all selected favorite

channels one by one.

Save : Save the channel number selected.

12. OPTION MENU

OSD Language

Adjust the language. as per the current software only English language can be set.

Blue Screen

Select On to get Blue Screen when no signal is available on TV set.

Select any one of the four games as per your choice

Games

13. CHANNEL MENU

Auto Scan

CHANNEL

Select this function TV will start auto tuning for all available channels.

If you want to stop auto searching press MENU or EXIT and press, < to

confirm, > to cancel.

Current CH: Display the program number of the current channel.

Color System: Select the color system PAL/SECAM/NTSC

OSD Duration

Adjust the appearance duration of TV display for 15 sec., 30 sec.,

60 sec. as desired by customer.

OPTION

Select to return TV back to all default settings.

Reset Default

14. HOTEL MODE

HOTEL

SETTING

Hotel Lock

Lock Channel

Set Source

Channel Number

Picture Lock

Key Lock

Max Volume

Source Lock

Clear Lock

To enter Hotel Setting Mode dial MENU+1194 from remote control.

Make this switch ON to activate Hotel Lock options. When this switch is

OFF hotel lock options will not operate. Use Navigation keys to ON/OFF

this function.

Select this option On, Channel Menu will not appear in main menu so

channel tuning is locked.

Select the power on source. After the TV switeches ON the power on source

will be same as specified here.

Select the power on channel (1-200) , after the TV mains On the power

on channel will be same as specified here.

Select this option On, Picture Menu will not appear in main menu so

picture settings are locked

Select this option On, all the panel keys will be locked and not work.

The main volume is limited by setting MAX

Select this option to lock all the source/input in TV that you don't

want others to use, Only TV source cannot be locked.

Select this option to reset all Hotel Setting to default.

Note:

Timer will get reset if main power On/Off

Use Left/Right keys on the remote to change Option and Up/Down keys to navigate.

Press Enter key on remote to enter into sub menus.

Press CH+/- key on TV panel to navigate.

Press Vol +/- keys to change option..

15. MEDIA

"NO DEVICE" icon means TV has not detected USB memory.

Press

to select Photo/Music/Movie/Text icon and ENTER to enter the USB memory.

For details :

Photo, see page "16"

Music, see page "17"

Movie, see page"18"

Text, see page "19"

Photo

Exit

Select

Move

No Device

16. MEDIA PHOTO

Photo

Select one and press to view and it will display all the pictures in the folder automatically.

Press ENTER to display the following menu, then you can press to select them.

Rotate counter clockwise.

Rotate clockwise.

Zoom the picture in.

Zoom the picture out.

Zoom out the picture first.

Highlight the icon and press ok, then press & to move the picture.

Press to display the information of the current picture (Resolution/Size/Date/Time)

info

Rotate

Zoom In

Zoom Out

Move View

Press to play or pause

Press to view the previous picture.

Press to view the next picture.

Press to stop and back to the previous folder.

Press to play all the pictures repeadetly in the current folder.

Press OK to select the repeat mode: Repeat One/ALL/None

Press to play or stop the background music.

Press to view the list of pictures.

Play

Prev.

Stop

RepeatAll

Music

Playlist

17. MEDIA MUSIC

Music

Press to play the selected music file.

Press to play or pause

Press to fast backward

Press to fast forward

Press to play the previous song.

Press to play the next song

Press to stop and back to the folder interface.

Press to play all the songs repeatly in the current folder

Press OK to select the repeat mode: Repeat One/ALL/None

Press to go the point you want to play.

Play

Prav.

Stop

Repea..

Press Mute to mute the Audio

Press to view the list of Music.

Goto Time

Mute

Playlist

Pause

Prav.

Stop

Repea..

Goto Time

Pause

Album Fakeera

Titles songs.pk

Janam Janam.mp3

Aspect..

18. MEDIA MOVIE

Movie

Press to play the selected movie file.

Press to play or pause.

Press to play backward faster.

Press to play forward faster.

Press to play the previous movie.

Press to play the next movie.

Press to stop and back to the folder interface.

Press to play all the movies repeatly in the current folder.

Press OK to select the repeat mode: Repeat One/ALL/None

Play

Plev.

Stop

Repea..

Set A-B to play repeatly.

Press once to set A, and press again to set B, then press the third time to cancel.

Press to view the list of movie.

Press to display the information of the current movie.

Press to play slower.

Press to play the movie step by step.(frame by frame.)

Press to go to the point you want to play.

Press to Zoom in

Press to Zoom out

info

Set A

Playlist

Slow Forward

Step For...

Goto Time

Zoom In

Zoom Out

Press to change aspect ratio

Movie

view

Press Enter, then press Up/Down & Left/Right to move.

Pause

Prav.

Stop

Repea..

Goto Time

Pause

Prev.

19. MEDIA TEXT

Text

Note: Only The*, txt file can be detected and read only.

Press to display the selected text file.

Select previous page.

Select next page.

Press to go to the previous text file.

Press to go to the next text file.

Press to stop and back to the folder interface.

Press to play or stop the background music.

Press to view the list of the text files.

Press to display the information of the current files.

Playlist

Prev. Page

info

Stop

Music

Pause

Microsoft community affiars provides training and tool that creat theb social

and economic opportunities that can transform communities and help people

realize their potential. Through our programs and our partnerships, Microsoft

supports numorous projects and organizations around the world working to expand

opportunities, and help improve digital inclusion, through technology access and

training.

Janam Janam.mp3

Prav.

Stop

Pause

Music

Playlist

20. USB to USB Copy (Only for 80cm 102cm LED TV)

SPECIAL FEATURES : (Optional)

1. USB to USB Copy Function : (From USB1 to USB2 & USB2 to USB1)

Copy files from USB1 to another USB2 by Remote Control.

Insert USB1 in port 1 of which files to copy in USB2 Port 2.

Now Select USB1 by remote & select files to copy.

Press Green Colour Sub Title key by remote, copy function will start

as per the following display on LED TV screen.

Copy File : File 1

Copy File Complete!!

Copy File : File 1

From : USB1/

To : USB2/

46%

USB-1

USB-2

COPY

USB-2

USB-1

COPY

USB-1

USB-2

21. USB FORMAT

USB 1 & 2 (Multimedia File Formats)

File Ext: Remarks Video Codec Frame Rate Bit Rate

dat , mpg.

mpeg

ts, trp, tp

vob

mp4

rm, rmvb

mkv

DivX , avi

asf

MPG, MPEG

MPEG2 -TS

H264-TS

MPEG2 -PS

AVI, MP4

RMVB, RM

MKV

AVI (1.0, 2.0)

DMF0, 1, 2

ASF

(Revision

01.20.03)

Mpeg1,2

MPEG2, H.264

MPEG2

MPEG4

DivX 3.11, DivX 4.12, DivX

5.x, DivX 6, Xvid 1.00,

Xvid 1.01, Xvid 1.02, Xvid

1.03, Xvid 1.10-beta1/2

H.264

rm code RV8, RV9, RV10

H.264, MPEG1,2,4

MPEG2, MPEG4

DivX 3.11, DivX 4.Divx 5, DivX

6, Xvid 1.00,

Xvid 1.01, Xvid 1.02, Xvid

1.03, Xvid 1.10-beta1/2

H.264

VC1

1920x1080@

30P

1920x1080 @

30P

1920x1080 @

30P

1920x1080 @

30P

1280x720 @

30P

1920x1080 @

30P

1920x1080 @

30P

1920x1080 @

30P

20Mbit/sec

10Mbit/sec

20Mbit/sec

Audio multimedia file formats

Audio Codec File Extension Bit Rate

MPEG1 Layer2

MPEG1 Layer3

MP3

32Kbps ~ 448Kbps(Bit rate)

32KHz ~ 48KHz(Sampling rate)

32Kbps ~ 320Kbps(Bit rate)

32KHz ~ 48KHz(Sampling rate)

Page is loading ...

Kodak 32HDX900s User manual

Brand: Kodak

Model: 32HDX900s

Category: LCD TVs

Type: User manual

This manual is also suitable for

Download PDF

report

Kodak 32HDX900s User manual

This manual is also suitable for

Kodak 32HDX900s User manual

Related papers

Other documents