2. Martec
  3. Fino
Fino

Martec Fino Installation guide

  • Hello! I'm your chat assistant. I've reviewed the installation guide for the MARTEC LED Ceiling Lights, including models MLFO34516WD, MLFO34518WD, MLFO34518WS, MLFO34518MD, MLFO34524WD, MLFO34524MD, MLFO34532WD, MLFO34532MD, and MLFO34538WD. This guide provides instructions on how to install these lights safely, emphasizing the need for a qualified electrician. It also explains the main features of the lights, such as color temperature adjustment. I'm ready to answer your questions about these lights.
  • What type of professional is required to install these lights?
    What should I do before starting the installation?
    What is the temperature range in which the lights can be operated?
We strongly recommend that you read this manual carefully before installation.
Installation MUST be carried out by a qualied and licensed electrician.
E: [email protected] | P: 02 8778 7500
www.martecaustralia.com.au
Fino LED Ceiling Light
Installation Guide
Models Parameters:
MLFO34516WD 16W LED Ceiling Light 210mm White
MLFO34518WD 18W LED Ceiling Light 280mm White
MLFO34518WS 18W LED Ceiling Light 280mm with Microwave
Motion Sensor White
MLFO34518MD 18W LED Ceiling Light 280mm Black
MLFO34524WD 24W LED Ceiling Light 350mm White
MLFO34524MD 24W LED Ceiling Light 350mm Black
MLFO34532WD 32W LED Ceiling Light 420mm White
MLFO34532MD 32W LED Ceiling Light 420mm Black
MLFO34538WD 38W LED Ceiling Light 500mm White
Installation Instructions
Part List:
1. Lamp cover
2. Light body
3. Colour temperature switch
4. Wall mount screws
5. Sealing ring
6. Insulation tube
3
Step 1. Switch OFF the mains supply
Step 2. Rotate the wall mounting plate “A” from light body “B” counter-clockwise to unlock the safety lock “C” and unplug the terminal
block “F”.
Step 3. Use the wall mounting plate “A” as a template to drill three holes in the wall or ceiling, then place the dowel”D” into the holes.
Step 4. Feed mains supply through the insulation tube “I” and connect live “L” and neutral “N” wires to the terminal block “E”.
Step 5. Use screws “G” and washer “H” provided to secure the wall mounting plate “A” onto a at surface.
Step 6. Lock the safety lock “C” and plug the terminal block “F” back on. Rotate the light body “B” clockwise to ret back to the
mounting plate “A”. NB: Ensure the tting is rmly tightened to maintain IP rating.
Step 7. Switch ON the mains supply and turn the oyster light on.
WARNING
• Installation of product MUST follow SAA standards and meet local authority regulations.
• Installation MUST be carried out by a qualied and licensed electrician.
• Light MUST be earthed.
• Light MUST be rmly installed to a at solid surface, wall or ceiling.
• DO NOT immerse any part of the light tting into water or any form of liquid.
• DO NOT look directly into the LED light.
• The warranty is VOID if product is not installed according to this installation guide.
5 Year Replacement Warranty
Visit our website for details https://www.martecaustralia.com.au/warranty-statement/
Models Power
(W)
PF CCT
(K)
Weight
(KG)
Operation Temperature
(Degree)
IP
MLFO34516WD 16 ≧0.9 3000 / 4000 / 5000 +40° -20° 54
MLFO34518WD 18 ≧0.9 3000 / 4000 / 5000 +40° -20° 54
MLFO34518MD 18 ≧0.9 3000 / 4000 / 5000 +40° -20° 54
MLFO34518WS 18 ≧0.9 3000 / 4000 / 5000 +40° -20° 54
MLFO34524WD 24 ≧0.9 3000 / 4000 / 5000 +40° -20° 54
MLFO34524MD 24 ≧0.9 3000 / 4000 / 5000 +40° -20° 54
MLFO34532WD 32 ≧0.9 3000 / 4000 / 5000 +40° -20° 54
MLFO34524MD 32 ≧0.9 3000 / 4000 / 5000 +40° -20° 54
MLFO34538WD 38 ≧0.9 3000 / 4000 / 5000 +40° -20° 54
Data Table
E: [email protected] | P: 02 8778 7500
www.martecaustralia.com.au
Fino LED Ceiling Lights
Installation Guide
CCT (Colour Changable Temperature)
5000K
CW NW WW
CW NW WW 3000K
4000K
CW NW WW
Choose colour temperature by icking the switch.
Sensor Setting (MLFO34518WS)
Manual Mode
Step 1. Set the tting in AUTO MODE.
Step 2. Turn the wall switch OFF then turn it back ON twice
within 3 seconds.
NB: Timing must be accurate. This cannot be done either
too quick (<1s) or too slow (>3s)
Sensor Mode
Step 1. Turn the wall switch OFF then turn it back ON.
4.0m4.0m
2.8m
(Max Height)
Ceiling
360˚
/