Martec Fino Installation guide

Brand: Martec

Model: Fino

Type: Installation guide

Martec Fino LED Ceiling Light: Experience superior illumination with CCT (Colour Changeable Temperature) technology that lets you customize your lighting ambiance. Choose from warm white (3000K), natural white (4000K), or cool white (5000K) with a simple flick of the switch. Its sleek and modern design complements any room décor, providing bright and energy-efficient lighting for your home or office.

We strongly recommend that you read this manual carefully before installation.

Installation MUST be carried out by a qualied and licensed electrician.

E: [email protected] | P: 02 8778 7500

www.martecaustralia.com.au

Fino LED Ceiling Light

Installation Guide

Models Parameters:

MLFO34516WD 16W LED Ceiling Light 210mm White

MLFO34518WD 18W LED Ceiling Light 280mm White

MLFO34518WS 18W LED Ceiling Light 280mm with Microwave

Motion Sensor White

MLFO34518MD 18W LED Ceiling Light 280mm Black

MLFO34524WD 24W LED Ceiling Light 350mm White

MLFO34524MD 24W LED Ceiling Light 350mm Black

MLFO34532WD 32W LED Ceiling Light 420mm White

MLFO34532MD 32W LED Ceiling Light 420mm Black

MLFO34538WD 38W LED Ceiling Light 500mm White

Installation Instructions

Part List:

1. Lamp cover

2. Light body

3. Colour temperature switch

4. Wall mount screws

5. Sealing ring

6. Insulation tube

Step 1. Switch OFF the mains supply

Step 2. Rotate the wall mounting plate “A” from light body “B” counter-clockwise to unlock the safety lock “C” and unplug the terminal

block “F”.

Step 3. Use the wall mounting plate “A” as a template to drill three holes in the wall or ceiling, then place the dowel”D” into the holes.

Step 4. Feed mains supply through the insulation tube “I” and connect live “L” and neutral “N” wires to the terminal block “E”.

Step 5. Use screws “G” and washer “H” provided to secure the wall mounting plate “A” onto a at surface.

Step 6. Lock the safety lock “C” and plug the terminal block “F” back on. Rotate the light body “B” clockwise to ret back to the

mounting plate “A”. NB: Ensure the tting is rmly tightened to maintain IP rating.

Step 7. Switch ON the mains supply and turn the oyster light on.

WARNING

• Installation of product MUST follow SAA standards and meet local authority regulations.

• Installation MUST be carried out by a qualied and licensed electrician.

• Light MUST be earthed.

• Light MUST be rmly installed to a at solid surface, wall or ceiling.

• DO NOT immerse any part of the light tting into water or any form of liquid.

• DO NOT look directly into the LED light.

• The warranty is VOID if product is not installed according to this installation guide.

5 Year Replacement Warranty

Visit our website for details https://www.martecaustralia.com.au/warranty-statement/

Models Power

(W)

PF CCT

(K)

Weight

(KG)

Operation Temperature

(Degree)

MLFO34516WD 16 ≧0.9 3000 / 4000 / 5000 +40° -20° 54

MLFO34518WD 18 ≧0.9 3000 / 4000 / 5000 +40° -20° 54

MLFO34518MD 18 ≧0.9 3000 / 4000 / 5000 +40° -20° 54

MLFO34518WS 18 ≧0.9 3000 / 4000 / 5000 +40° -20° 54

MLFO34524WD 24 ≧0.9 3000 / 4000 / 5000 +40° -20° 54

MLFO34524MD 24 ≧0.9 3000 / 4000 / 5000 +40° -20° 54

MLFO34532WD 32 ≧0.9 3000 / 4000 / 5000 +40° -20° 54

MLFO34524MD 32 ≧0.9 3000 / 4000 / 5000 +40° -20° 54

MLFO34538WD 38 ≧0.9 3000 / 4000 / 5000 +40° -20° 54

Data Table

E: [email protected] | P: 02 8778 7500

www.martecaustralia.com.au

Fino LED Ceiling Lights

Installation Guide

CCT (Colour Changable Temperature)

5000K

CW NW WW

CW NW WW 3000K

4000K

CW NW WW

Choose colour temperature by icking the switch.

Sensor Setting (MLFO34518WS)

Manual Mode

Step 1. Set the tting in AUTO MODE.

Step 2. Turn the wall switch OFF then turn it back ON twice

within 3 seconds.

NB: Timing must be accurate. This cannot be done either

too quick (<1s) or too slow (>3s)

Sensor Mode

Step 1. Turn the wall switch OFF then turn it back ON.

4.0m4.0m

2.8m

(Max Height)

Ceiling

360˚

Martec Fino Installation guide

Martec Fino Installation guide

Martec Fino Installation guide

Related papers

Other documents