Amazboost A1 Cell Phone Signal Booster User manual

Category
Cellular signal boosters
Type
User manual

Amazboost A1 Cell Phone Signal Booster enhances weak mobile signals, offering improved call quality, faster internet speeds, and uninterrupted streaming. With coverage up to 2,500 sq. ft. and support for multiple devices, it's ideal for homes, offices, and rural areas with weak signal reception. Installation is simple, with a user-friendly design and included accessories.

Amazboost A1 Cell Phone Signal Booster enhances weak mobile signals, offering improved call quality, faster internet speeds, and uninterrupted streaming. With coverage up to 2,500 sq. ft. and support for multiple devices, it's ideal for homes, offices, and rural areas with weak signal reception. Installation is simple, with a user-friendly design and included accessories.

A1
CellPhoneSignalBooster
Manual OperationalDiagram
(HowItWorks)
PackageContents
Page2
BasicSignalLevelKnowledge
Page3
Preparation
InstallationStepByStep
Page5‐ 12
Preparation
Page4
TroubleShooting
Page13‐ 14
Technical Specification
ManufacturedandWarrantedby
Amazboost TechnologyInc.
www.amazboost.com
Technical
Specification
WarrantyInformation
Page15
SafetyGuidelines
Page16
1
customerservicenumber:
Office (435)3196858
TollFree (877)5797878
Support@Signalbooster.zendesk.com
WorkingDiagram(HowItWorks)
1. Theoutdoorantennacatchesthesignalfromthetower.
2. Sendsoutsidesignaltotheboosterthroughacoaxcable.
3. Theboosteramplifiesthesignalthenrebroadcaststhesignalindoorstoallmobile
deviceswithinrange.
4
The
system also works in
reverse;
amplifying outgoing signal back to the
tower
4
.
The
system
also
works
in
reverse;
amplifying
outgoing
signal
back
to
the
tower
.
Thecoverageareaandthestrength oftheboostedsignalaredirectly
relatedtotwokeyfactors:
1. Signalstrengthreceived bytheoutdoorunit.So,settinguptheoutside
unitwherethesignalisthestrongestwillprovidethebestresults.
Distance of
separation
between the outdoor unit and the indoor unit
PackageContents
Thekitincludesthefollowingitems:
1. OutdoorAntenna(withmountingkits);
2. Booster(withindoorantenna);
3
Power supply
;
.
Distance
of
separation
between
the
outdoor
unit
and
the
indoor
unit
.
3
.
Power
supply
;
4. 60ft ofRG6cable,forconnectingtheoutdoorantennaandbooster;
2
OutdoorAntennaBooster&IndoorAntenna Powersupply RG6cable
Signaltransmissionlossandpowerlevel
Coverageareaability
Note:FCCregulationslimittheamplificationofallcellphoneboostersinorderto
prevent damage to the telecommunications infrastructure Therefore the maximum
prevent
damage
to
the
telecommunications
infrastructure
.
Therefore
,
the
maximum
coverageareaofaboosterdependsontheoriginalpowerlevelofthesignalcapturedby
theoutdoorunit.
Notice:Notrecommendedwhenoutdoorsignalstrengthislessthan‐110dbm(3G/1x)
or‐120dBm(4G/LTE).Theresultingcoverageareaoftheboostedsignalwillbe
prohibitively small
Powerlevel
attheoutdoorantennalocation
Coverage Area
(sq.ft.)
Strong(5 bars onthecellphone) 2,500
Medium(3~4bars onthecellphone) 1,300
prohibitively
small
.
Weak(1~2bars onthecellphone) 400
3
Findacelltowernearby!
Thereareavarietyofresourcesavailableonline,herearesomethirdpartywebsites
andapp recommended.Usethesetolocateyournearestcelltower,eitherbystreet
address of GPS coordinates.
Preparation
address
of
GPS
coordinates.
ForU.S.websites:
www.antennasearch.com/
www.cellmapper.net/
www.cellreception.com/towers
ForCanadawebsite:
www.cellma
pp
er.net
/
pp /
APP:TowerLocator(iPhoneorAndroid)
FindThedBm ReadingOnYourPhone
Having an accurate measurement of signal strength in decibels (
dBm
)is crucial when
Having
an
accurate
measurement
of
signal
strength
in
decibels
(
dBm
)
is
crucial
when
installingyoursystem.Decibelsaccuratelymeasurethesignalstrengthyouarereceiving.
Testboth3Gand4GsignalforbestresultsbyturningtheLTEoffinthecarriersettingsof
yourdevice.
iPhone:needtodownloadthirdpartAPP;
Android: Settings>AboutPhone>StatusorNetwork>SignalStrengthorNetwork
TypeandStrength(exactoptions/wordingdependsonphonemodel).
Note:Turnoffyourcellphone’sWiFi toensureyouarecheckingthecellularconnection.
ThedBm readin
g
willberefreshedever
y
3060seconds.Wantfasterresults?Once
y
ou
YouWillNeed(makesurethefollowingthingsandtoolsarepreparedandreadyforyour
installation.)
2
~
3hours
g
y
y
haveareading,turnonairplanemode.Wait15seconds.Turnoffairplanemode.The
signalstrengthreadingisrefreshed.
23
hours
2people(apersontohelpwithantennacalibration)
Drill(ifroutingcablethroughwall)
Recommended:PowerStripwithsurgeprotection
4
Step1:MeasuretheSignalStrengthInsideyourHome
TestInstallation
WeSTRONGLY recommenddoingatestinstallationbeforefinalizingtheinstallation.
Doingatestinstallationofyourcellphoneboosterensuresthatyouwillgettheoptimal
performancefromyoursystem.
Testyourcurrentsignalstrengthinmultiplelocationsthroughoutthehome
Recordthecurrentsignalstrengthinthetableprovidedforreference
Test Record
No Location Record(dBm)
1
2
3
Step2:SelecttheLocationfortheInsideAntenna
4
5
Shouldhaveaccesstoa
poweroutlet
Theindoorunitcontains
anomnidirectional
antenna.Choosinga
centrallocationin
y
our
y
homewillhelpto
maximizeyourcoverage
area.
5
Step3:SelecttheLocationfortheOutsideUnit
1. Thisisthemostcriticalstepandwilldeterminetheoverallperformanceofthe
boostersystem.
2. UsingthesamemethoddescribedinStep1,walkaroundtheoutsideofyourhome
andtestthesignalstrength.Determinewhereyouhavethestrongestsignal(the
dBm
reading is closest to zero).
dBm
reading
is
closest
to
zero).
3. Generally,thestrongestsignalwillbelocatedonthesideofyourhomefacingthe
nearestcelltower.Keepinmind,thesignalstrengthatgroundlevelmaybedifferent
fromthesignalstrengthatorabovetherooflineduetoobstructions(trees,other
buildings,etc.)thatblocktheincomingsignal.Inmostsituations,thestrongestsignal
isfoundabout15feetabovethegroundonthesideofyourhomefacingthenearest
celltower.
Caution
Theheightoftheoutsideantennashouldneverexceedthehighestpointofyour
home.Thisisaprecautionagainstdamageandsafetyconcernscausedbylightning
strikestotheoutsideunit.
Inordertoachievethebestperformance,trytomaximizethedistancebetweenthe
insideandoutsideantenna.
Ensurethattheoutsideantennaispointedawayfromwhereyouplantoinstallthe
insideantenna.Selfoscillationmayoccuriftheoutsideantennaispointedoverthe
locationoftheinsideantenna.
Test
Record
Test
Record
No Location Record(dBm)
1
2
3
4
56
Step4:TemporarilyMounttheOutsideAntenna
Useoneofthethreeoptionstomounttheoutsideantennaonyourroofonthesideof
thehousewiththestrongestsignal
Inordertoachievethebestsi
g
nalcovera
g
eeffect
,
Caution
g g ,
thereisacertaindistancerequirementbetweenthe
indoorandoutdoorunits.Makesuretheinsideand
outsideunitsarefacingawayfromeachother.
MinimumRequiredSeparationDistanceBetween
IndoorandOutdoorAntenna
20ft (6meters)horizontaldistance
13ft (4meters)verticaldistance(Asfaraspossible)
MakesuretomeettheMinimumSeparation
Requirementswhileatthesametimemountingthe
outsideunitinthelocationwiththestrongestsignal.
7
Step5:ConnecttheSystem
1.Connecttheoutsideantennatothe30
feetRG6cable,fixtheconnector(Inorderto
avoidinternaldamageoftheantenna
connectorduetogravityorpullingthecable)
Securethecableneartheantenna
topreventcabledamagecaused
bywindshaking
2.Connectthe“OUTSIDE”porton
boosterandtheoutsideantenna
to
g
etherb
y
usin
g
thecoaxcable.
3.Connecttheinsideantennatothe
“INSIDE” h b
4.Pluginthepoweradaptorand
i h l
g y g
“INSIDE”
por
t
on
th
e
b
oos
t
er. connec
t
it
t
o
th
eneares
t
powerou
tl
e
t
(surgeprotectorrecommended).
8
Step6:EvaluatetheEffects
Nowthattheboosterisupandrunning,retestthesignalstrengthinsideyourhome
atthesamelocationsfromStep1.Ifthenumberishigher(dBm readingiscloserto
zero)thantheoriginalreading,yourboosterisworking.
If ili t t hkth LED li ht th bt d f t th
Test Record
No Location Record(dBm)
If
yours
i
gna
l
i
sno
t
s
t
ronger,c
h
ec
k
th
e
LED
li
g
ht
son
th
e
b
oos
t
eran
d
re
f
er
t
o
th
e
“QuickTroubleshootingsectionattheendofthemanual.
1
2
3
DecibelGainvs.PowerAmplification/Distance/Coveragearea
4
5
DecibelGain PowerAmplification
(times)
DistanceEnhance
(times)
CoverageEnhance
(times)
64 2 4
10 8 3 9
20 100 8 64
30 1000 32 900
N
DiblGi d P A lifi i ddi hifi f
N
ote:
D
ec
ib
e
l
G
a
i
nan
d
P
ower
A
mp
lifi
cat
i
onmayvary
d
epen
di
ngont
h
espec
ifi
cso
f
your
situation.Differentbuildingmaterialsandotherobstructionsinyourhomewillresultin
differentoutcomes.
9
Step7:FinalizingOutdoorAntennaInstallation
OutdoorAntennaInstallation
Makesurethattheoutsideunitismountedatleast3feetawayfromanywindows.
Onceyouhavetestedtheperformanceofthesignalboosterandmadeallnecessary
adjustments,itstimetofinalizetheinstallation.
OptionB:MountingonSideofWall(SecondChoice)
OptionA:OutsideRoofPoleMount(BestChoice)Useanexistingpoletomountthe
outdoorunitintheoptimalsignallocation.Usethepictureforreference.
Caution
Inparticular,cablesforoutdoorantennalocations
mustbefixed.Otherwise,theinternalwiresofthe
cablewillbepulledoffafterthewindhasbeen
hk f l ti Th lifi ill t i
s
h
a
k
en
f
ora
l
ong
ti
me.
Th
eamp
lifi
erw
ill
no
t
rece
i
ve
thesignalandthesystemwillfailcompletely.
Asshowninthefigure,itisbesttohavethecable
aroundasingleturnshapeandthenfixit.
Lon
g
termrainormoistureerosioncandama
g
e
10
g
g
theelectricalcharacteristicsofoutdoorantenna
connectors.Makesureconnectorsarewell
screwedinandsealtheconnectorswithglued
tape.
2.Mountthebooster
Step8:FinalizingIndoorInstallation
1.Chooserightpositionfortheindoorantenna
20cmawayfromanyothermetallicobjects
50cmawayfromanywindows
Chooseaventilatedanddryplace
Keepawayfromheat
Don'tcoverbooster
Boosterwillabout30degreesFahrenheit
higher than the ambient temperature which
Step9:FinalizingandSecuringCableRoute
higher
than
the
ambient
temperature
,
which
isanormalphenomenon.
Findthebestrouteforthecable.
Followthelinesofyourhometo
hidethecableineavesor
betweenthesoffitandthe
exteriorwall.
Ifneeded,cableclipscanbe
purchasedatmosthardware
stores.
Whether the cable is properly
Whether
the
cable
is
properly
securedisveryimportantforthe
entiresystem.Inmostcases,the
customerfoundthatthebooster
didnotworkafterworkingfora
periodoftimebecausethecable
wasnotinstalledsecurel
y
.
11
y
Carefullyarrangethecablealong
theoutsideofthebuildingand
ensurethattherearenofoldsor
kinks.Fixthecableateachcorner
Caution
Securethecablenear
theantenna to
p
revent
SealandFixtheConnector
p
cabledamagecausedby
windshaking
Ifthecoiledcableistooclosetotheantennaorbooster,thesystemwillbeunstable.
Makesurethesecoiledcablesaremorethan6feet(2meters) fromtheantennaor
booster
ProperlyHandleExcessCables
Makesuretheseexcesscoiledcablesaremorethan6feet(2meters) fromtheantenna
orboostercanmakeyoursystemworkmorestable.
6 feet6 feet
12
Correctfunctioning:
PowerLightshouldbesolidgreen
Thelightsonthefrontpanelindicatetheconditionofthebooster.Everytimethe
boosteris
p
oweredon
,
alloftheli
g
htswillbe
g
reenincolorforseveralsecondsthen
QuickTroubleshooting
p , g g
off.Thismeanstheboosterhaspassedtheselfcheckandisingoodcondition..
IncorrectFunctioning:(PleaseseetheTroubleshootingGuideforfurtherdetails)
Ifanyofthelightsonthefrontpanelareflashingingreenthenoff/continue
flashing/solidgreen,itmeansthatselfoscillationisoccurring.Youmustswitchoffthe
boosterandchecktheoutsideandinsideantennasimmediately.Makesureyouhave
PowerLight PanelStateLight
followedtherecommendedinstallationprocessandcheckeachstepcarefully.Referto
SelfOscillationsectionformoredetailsofminimumrequiredseparationdistance,
antennasinstallation.Ifyoucannotfixtheproblempleasecontactthetechnical
supportorthereseller.
Amazboost TechnicalSupport:Support@Signalbooster.zendesk.com
Trouble Shooting:
No
Signal Improvement
Trouble
Shooting:
No
Signal
Improvement
Step1.Checkpower.Ensuretheindoor
unitispluggedinandtheLEDPowerLight
is
g
reen.
13
g
TroubleShooting:NoSignalImprovement
Step2.Checkcableconnections.Ensuretheindoor
andoutdoorunitsaresecurelyconnectedtothecoax
cable.
Step3.Ifanyofthelightsonthefrontpanelare
flashingingreenthenoff/continueflashing/solid
green,itmeansthatselfoscillationisoccurring.You
must switch off the booster and check the outside
must
switch
off
the
booster
and
check
the
outside
andinsideantennasimmediately.
Step4.Doublecheckthelocationof
outdoorandindoorunits.Makesurethat
theMinimumSeparationRequirements
havebeenmet.Makesurethattheoutside
antennaisnotpointedtowardstheinside
antenna.
MinimumRequiredSeparationDistanceBetweenIndoorandOutdoorUnit
HorizontalDistance=20feet(6meters)
VerticalDistance=13feet(4meters) (Asfaraspossible)
Step5.Checkincomingsignallevelatoutdoor
unitposition. Usageofaboosterisnot
recommendwhentheoutdoorsignalisless
than‐110dbm(3G/1x)or‐120dBm(4G/LTE).
1414
Ifyouhaveanyquestionsorconcernswheninstallingoroperatingyourcellphonebooster,please
emailus:Support@Signalbooster.zendesk.com
Orcallourcustomerservice8775797878
TechnicalSpecification
Frequency
(MHz)
LTE
(band12)
LTE
(band13)
Cellular
(band5)
PCS
(band25/2)
AWS
(band4)
Uplink 698716 776787 824849 18501915 17101755
Downlink 728746 746757 869894 19301995 21102155
Gain
Uplink
55
±
2
55
±
2
55
±
2
60
±
2
60
±
2
Gain
Uplink
55
±
2
55
±
2
55
±
2
60
±
2
60
±
2
Downlink 60±2 60±2 60±2 65±2 65±2
Outputpower 26±2dBm(Uplink)/0±2dBm(Downlink)
Noisefigure <5dB
InbandFlatness <8dB
Weight 0.7Kg
EIRP 1W
WARRANTY
Impedance 50ohm
Operatingtemperature 5°~60°
Current 1.5A(6VDC)
Dimension(mm) 155*125*25
TheOutdoorUnitandIndoorUnitarecoveredunderathreeyearproductwarrantyforfailuresor
defects that result from craftsmanship and/or materials. Dated proof of purchase should be retained
defects
that
result
from
craftsmanship
and/or
materials.
Dated
proof
of
purchase
should
be
retained
foruseinwarrantycases.Contacttheretailer/resellerdirectlywithanywarrantyissues,or
alternativelycontactthemanufacturerincaseswheretheresellerisnolongeravailabletohandle
warrantyclaims.Incaseswheretheresellerisunavailable,theproductmaybereturnedtothe
manufacturerattheconsumersexpense,withadatedproofofpurchaseandareturnauthorization
letterwhichcanbeattainedbycontactingAmazboost.
ThiswarrantydoesnotapplytoanysignalboostercomponentsdeterminedbyAmazboost tohave
beensub
j
ectedtomisuse
,
abuse
,
ne
g
lect
,
tam
p
erin
g,
ormishandlin
g
thatresultindama
g
estothe
j , , g, pg, g g
physicalorelectronicpropertiesoftheproduct.Refurbishedproductsthathavebeenrecertifiedto
conformtoproductspecificationsmaybeusedforproductreplacements.
DISCLAIMER:TheinformationprovidedbyAmazboost isbelievedtobecompleteandaccurate,tothe
bestofourknowledge.However,noresponsibilityisassumedbyAmazboost foranybusinessor
personallossesarisingfromtheuseoftheinformationhereincontained,orforanyinfringementsof
patentsorotherrightsofthirdpartiesthatmayresultfromitsuse.
15
Ifyouhaveanyquestionsorconcernswheninstallingoroperatingyourcellphonebooster,please
emailus:Support@Signalbooster.zendesk.com
Orcallourcustomerservice8775797878
Toupholdnetworkprotectionstandardsandensurecompliance,allactivecellulardevicesmustmaintain
aseparationdistanceofatleastsixfeetbetweentheinsideunitantennaandoutsideunitantennaandat
leastfourfeetofseparationdistancefromtheinsideunit.Useonlythepowersupplyprovidedinthis
package.UseofanonAmazboost productoraccessorymayresultindamagetotheequipmentor
components of the equipment. The inside unit is designed for use in an indoor, temperature
controlled
SafetyGuidelines
components
of
the
equipment.
The
inside
unit
is
designed
for
use
in
an
indoor,
temperature
controlled
environment(lessthan100degreesFahrenheit).Itisnotintendedforuseinatticsorsimilarlocations
wheretemperaturesmaybeinexcessofthatrange.
RFSafetyWarning:Anyantennausedwiththisdevicemustbelocatedatleast8inchesfromallpersons.
FORMOREINFORMATIONONREGISTERINGYOURSIGNALBOOSTERWITHYOURWIRELESSPROVIDER,
PLEASESEEBELOW:
Sprint:http://www.sprint.com/legal/fcc_boosters.html
TMobile/MetroPCS:https://support.tmobile.com/docs/DOC9827
VerizonWireless:http://www.verizonwireless.com/wcms/consumer/registersignalbooster.html
AT&T: https://securec45.securewebsession.com/attsignalbooster.com/
U.S.Cellular:http://www.uscellular.com/uscellular/support/fccboosterregistration.jsp
Ifyouhaveanyquestionsorconcernswheninstallingoroperatingyourcellphonebooster,please
emailusat
Support@Signalbooster.zendesk.com
Oll i b
16
O
rca
ll
ourcustomerserv
i
cenum
b
er
Office (435)3196858
TollFree (877)5797878
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment .
This transmitter must not be co‐located or operating in conjunction with any other antenna or
transmitter.
This equipment should be installed and operated with minimum distance 20cm between the radiator
&you body.
Any Changes expressly or modifications not approved by the party responsible for compliance could void
the user's authority to operate the equipment.
Toupholdnetworkprotectionstandardsandensurecompliance,allactivecellulardevicesmustmaintain
aseparationdistanceofatleastsixfeetbetweentheinsideunitantennaandoutsideunitantennaandat
leastfourfeetofseparationdistancefromtheinsideunit.Useonlythepowersupplyprovidedinthis
package.UseofanonSolidRF productoraccessorymayresultindamagetotheequipmentor
components of the equipment. The inside unit is designed for use in an indoor, temperature
controlled
SafetyGuidelines
components
of
the
equipment.
The
inside
unit
is
designed
for
use
in
an
indoor,
temperature
controlled
environment(lessthan100degreesFahrenheit).Itisnotintendedforuseinatticsorsimilarlocations
wheretemperaturesmaybeinexcessofthatrange.
RFSafetyWarning:Anyantennausedwiththisdevicemustbelocatedatleast8inchesfromallpersons.
CPC2105—Zon
eEnhancers‐ Spectrummanagementandtelecommunications
http://www.ic.gc.ca/eic/site/smtgst.nsf/eng/sf08942.html
Mobile phone is the minimum distance to use indoor antenna
Inside server antenna types Minimum separation distances D (m)
Ceiling mounted (e.g., dometype) antennas 2
Wall mounted (i.e., panel or other type)
antennas
1.0 or 2*
Table top antennas 1.0
ISED
20
Antenna Kitting Information
ComponentTypespecification
Gain/Loss
Manufacturer
LTE707LTE781 800MHz 1900MHz 1700MHz\2100MHz
OutsideCableLMR24045Feet2.9dB3.15dB 3.38dB 4.87dB4.87dB\5.2dBSuirongcable
OutsideCableSRLMR40030NN30Feet1.9dB1.9dB1.95dB 2.9dB2.55dB\2.9dBSuirongcable
InsideCableRG6FF90Feet 4.3dB4.6dB 5dB 7.6dB 6.6dB\8.4dB Suirongcable
InsideCableRG6FF75Feet 3.6dB3.8dB 4.2dB 6.3dB 5.5dB\7dB Suirongcable
InsideCableRG6FF60Feet 2.9dB3.0dB 3.3dB 5dB 4.4dB\5.6dB Suirongcable
InsideCableRG6FF45Feet 2.2dB2.3dB 2.5 dB 3.8 dB 3.3 dB\4.2dB Suirongcable
InsideCableLMR24090Feet 5.85dB6.3 dB 6.75 dB 9.9 dB 9.9dB\10.35dB Suirongcable
InsideCableLMR24075Feet 4.88dB5.25dB 5.63dB 8.25dB 8.25\8.63 dB Suirongcable
InsideCableLMR24060Feet 3.9dB4.2dB 4.5dB 6.6dB 6.6 dB\6.9 dB Suirongcable
InsideCableLMR24045Feet 2.9dB3.15dB 3.38dB 4.87dB 4.87dB\5.2dB Suirongcable
InsideCableSRLMR40030NN30Feet1.9dB1.9dB 1.95dB 2.9dB 2.55dB\2.9dB Suirongcable
InsideCableSRLMR40075NN75Feet4.2dB4.2dB 4.4dB 6.1dB 5.8dB\6.5dB Suirongcable
InsideCableSRG5830FN30Feet4.5dB4.5dB 4.9dB 7.6dB 7.2dB\8dB Suirongcable
InsideCableSRLMR40020NN20Feet1.3dB1.3dB 1.35dB 1.8dB 1.8dB\1.9dB Suirongcable
InsideCableSRG5815FN15Feet2.35dB2.4dB 2.56dB 3.9dB 3.7dB\ 4.1dB Suirongcable
InsideCableSRLMR40030NN30Feet1.9dB1.9dB 1.95dB 2.8dB 2.55dB\2.9dB Suirongcable
OutsideAntennaANT0507017dBi7dBi7dBi10dBi10dBi\10dBi
Shenzhen Dachi Communications
Co., Ltd.
OutsideAntennaANT0109019dBi9dBi9dBi9dBi9dBi
Shenzhen Dachi Communications
Co., Ltd.
Outside Antenna
ANT010701
9
dBi
9
dBi
9
dBi
9
dBi
9
dBi
Shenzhe
n
Dach
i
Communications
Outside
Antenna
ANT010701
9
dBi
9
dBi
9
dBi
9
dBi
9
dBi
Shenzhe
n
Dach
i
Communications
Co., Ltd.
OutsideAntennaANT0603023dBi3dBi3dBi3.5dBi3.5dBi\3.5dBi
Shenzhen Dachi Communications
Co., Ltd.
OutsideAntennaANT0303013dBi3dBi3dBi3dBi3dBi
Shenzhen Dachi Communications
Co., Ltd.
OutsideAntennaANT0603023dBi3dBi3dBi3.5dBi 3.5dBi\3.5dBi
Shenzhen Dachi Communications
Co., Ltd.
OutsideAntennaANT0303013dBi3dBi3dBi3dBi3dBi
Shenzhen Dachi Communications
Co., Ltd.
I
id
At
ANT05
07
01
7dBi
7dBi
7dBi
10
dBi
10
dBi
\
10dBi
Sh h
Dh
i
Citi
I
ns
id
e
A
n
t
enna
ANT05
07
01
7dBi
7dBi
7dBi
10
dBi
10
dBi
\
10dBi
Sh
enz
h
en
D
ac
h
i
C
ommun
i
ca
ti
ons
Co., Ltd.
InsideAntennaANT0109019dBi9dBi9dBi9dBi9dBi
Shenzhen Dachi Communications
Co., Ltd.
InsideAntennaANT0107019dBi9dBi9dBi9dBi9dBi
Shenzhen Dachi Communications
Co., Ltd.
InsideAntennaANT0603023dBi3dBi3dBi3.5dBi 3.5dBi\3.5dBi
Shenzhen Dachi Communications
Co., Ltd.
InsideAntennaANT0403013dBi3dBi3dBi3dBi3dBi
Shenzhen Dachi Communications
Co., Ltd.
InsideAntennaANT0803013dBi3dBi3dBi3dBi3dBi
Shenzhen Dachi Communications
Co., Ltd.
InsideAntennaANT0803023dBi3dBi3dBi3dBi3dBi
Shenzhen Dachi Communications
Co., Ltd.
InsideAntennaANT0603013dBi3dBi3dBi3dBi3dBi
Shenzhen Dachi Communications
Co., Ltd.
InsideAntennaANT0603033dBi3dBi3dBi3dBi3dBi
Shenzhen Dachi Communications
Co., Ltd.
InsideAntennaANT0701011dBi1dBi1dBi1dBi1dBi
Shenzhen Dachi Communications
Co.
,
Ltd.
19
,
InsideAntennaSR213001003dBi3dBi3dBi3.5dBi 3.5dBi\3.5dBi
Shenzhen Dachi Communications
Co., Ltd.
LightningProtectorACC0101010.1dB0.1dB 0.1dB 0.18dB 0.16dB\0.2dB
Shenzhen Dachi Communications
Co., Ltd.
AllequivalentantennasandcablesaresuitableforusewiththeSolidRFbooster.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21

Amazboost A1 Cell Phone Signal Booster User manual

Category
Cellular signal boosters
Type
User manual

Amazboost A1 Cell Phone Signal Booster enhances weak mobile signals, offering improved call quality, faster internet speeds, and uninterrupted streaming. With coverage up to 2,500 sq. ft. and support for multiple devices, it's ideal for homes, offices, and rural areas with weak signal reception. Installation is simple, with a user-friendly design and included accessories.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI