How do you like them apples?
Starkrimson® Duo/Trio Instructions
NOTES:
• Due to the bridged amplifier design, all speaker terminals are hot when the amplifier is on.
o Warning – High Voltage
o Do not connect any of the outputs to ground or earth.
• Do not power up or operate the amplifier without speakers connected to all channels.
• No user-serviceable parts – tampering with the amplifier will void the warranty.
To turn the amp on:
• Connect speakers to all channels
• Connect Inputs (XLR) on all channels
• Plug-in the power cord (switch must be in the off position)
• Turn the amplifier on by flipping the switch to the on position.
To turn the amp off:
• Turn it off by flipping the switch to the off position.
• Wait at least 15 seconds before removing any connections
Improper powerup or power down of the amps may cause damage and this damage will not be
covered under the warranty.
