Fujifilm 16785547 User guide

User's Guide (Full version)

NA_EN

model number: FI017W FI017-EN-NA-01

2

Table of Contents

Before Use �� 3

Notes on Disposing of the Printer �� 3

Part Names ��3

Installing the INSTAX SQUARE LINK App ��4

Charging the Battery ��4

Charging status indication with the LED ��4

Loading/Unloading the INSTAX SQUARE® Instant Film

Pack ��5

Loading the INSTAX SQUARE Instant Film Pack ��5

Unloading a Used INSTAX SQUARE Instant Film Pack��5

Turning on/off the Printer ��6

Checking the Printer Status with the LED ��6

Connecting Your Smartphone and Printer Together and

Printing �� 6

When Establishing Connection for the First Time ��6

When the Printer and Your Smartphone Are Already

Connected ��9

Reprinting an Image ��10

Taking a Photo with the INSTAX Camera Mode in the

App ��11

AR Print and INSTAX Connect App Features��11

Specifications ��11

Troubleshooting ��12

IMPORTANT SAFETY NOTICE ��13

Printer Care �� 13

Bluetooth® Devices: Cautions �� 15

3

Before Use

Before using the printer, check the following.

Supplied Accessories

• USB Type-C cable for charging (1)

(YR059291QAD0000)

• User's Guide (1)

• 1 Year Limited Warranty (1)

The battery has not been fully charged at the factory. Before

using the printer for the first time, be sure to fully charge the

battery. The free INSTAX SQUARE LINK App will need to be

downloaded and paired with your Smartphone prior to initial

use.

Notes on Disposing of the Printer

A built-in lithium ion battery is located inside this printer.

When you dispose of the printer, follow your local regulations and

dispose of it properly.

For proper disposal in the United States at product end-of-life,

please contact 1-800-800-3854 Option #1 INSTAX.

For proper disposal in Canada at product end-of-life, please

contact 1-800-461-0416.

For proper disposal in Latin America at product end-of-life, please

contact your local FUJIFILM distributor or dealer for disposal

instructions.

Do not attempt to remove the built-in battery. Injury may result.

Read “IMPORTANT SAFETY NOTICE” (Page 13 ) for safety use.

Part Names

Front

1

3

4

2

5

6

Rear

7

8

1 Film ejection slot

2 Function button

3 Power button/LED1

4 USB port cover

5 Reset button2

6 USB Type-C port

7 Film door lock

8 Film door3

1 For details on LED indication status, see pages 4 and 6.

2 If the printer does not work properly, press the reset button to

reset the printer.

3 Uses INSTAX SQUARE instant film, sold separately.

4

Installing the INSTAX SQUARE LINK App

Please install the free INSTAX SQUARE LINK Smartphone App on

your Smartphone before using the printer.

• If you are using an Android OS Smartphone, please search for

the INSTAX SQUARE LINK Smartphone App in the Google Play

Store and install it.

*Requirements for Android OS Smartphones: Android Ver. 7.0

or higher with Google Play Store installed

• If you are using an iOS Smartphone, please search for the

INSTAX SQUARE LINK Smartphone App in the App Store and

install it.

*Requirements for iOS Smartphones: iOS Ver. 12.0 or higher

• The INSTAX SQUARE LINK App may not be fully compatible with

all versions and models of Smartphones.

Access the INSTAX SQUARE LINK App download sites below for

the latest information on system requirements�

https://instax.com/square_link/ios.html

https://instax.com/square_link/

android.html

Scan to download the INSTAX SQUARE LINK Smartphone

App

Android OS

iOS

The text QR Code itself is a registered trademark and wordmark of

Denso Wave Incorporated.

Charging the Battery

Plug USB AC adapter

into an indoor power

outlet

Note that a USB AC adapter is not included, but is typically

provided with your Smartphone or otherwise purchased

separately.

Connect the printer with a USB AC adapter (not included with

INSTAX SQUARE LINK printer) using the supplied USB Type-C cable,

then connect the USB AC adapter to an indoor power outlet.

• You can print an image while charging is in progress.

• Charging time is approximately 80 to 120 minutes.

Charging status indication with the LED

When the printer is turned on:

Indication Charging status

LED lights up in white Not charging or charging is completed

LED flashes in white Charging

When the printer is turned off:

Indication Charging status

LED is turned off Not charging or charging is completed

LED flashes in green Charging

Check the charging status with your Smartphone when connected

to the free INSTAX SQUARE LINK App.

Charging from a PC:

• Connect the printer and PC directly. Do not connect via a USB

hub or keyboard.

• If the PC goes into sleep mode while charging, charging is

discontinued. To continue charging, exit sleep mode and then

reconnect the provided USB Type-C cable.

• The battery may not be able to charge depending on the

specifications and settings or conditions of the PC.

Notes

• The battery has not been fully charged at the factory. Be sure

to charge the battery before using the printer.

• The battery cannot be removed.

• For notes about the battery, see “Printer Care”. (p.13)

5

Loading/Unloading the INSTAX SQUARE®

Instant Film Pack

CAUTION

Do not open the film door until you have used all of the

exposures on your INSTAX instant film pack; otherwise, the

remainder of the film will become exposed and turn white�

Exposed instant film cannot be used to print INSTAX images�

• When you load the film pack, never press the two rectangular

holes on the back of the film pack.

• Never use a film pack beyond its shelf life; otherwise, it may

damage the printer.

Use FUJIFILM INSTAX SQUARE Instant Print Film only. The

INSTAX MINI™ or INSTAX WIDE™ Instant Film Packs cannot be

used in the INSTAX SQUARE LINK printer.

Notes on the film pack

• Each FUJIFILM INSTAX SQUARE Instant Film Pack contains one

black film protective cover and 10 film sheets.

• Do not remove the film pack from its inner bag until you are

ready to load the film pack into the printer.

• The film cover is ejected automatically when the film door is

closed.

For details, refer to the instructions and warnings on the

package of FUJIFILM INSTAX SQUARE Instant Print Film.

Loading the INSTAX SQUARE Instant Film Pack

1 Slide and hold the film door lock and open the film

door�

2

1

2 Insert an INSTAX SQUARE instant film pack by

aligning the yellow marks�

2

1

3 Close the film door�

4 Remove the black film cover that is ejected from the

printer�

The INSTAX SQUARE LINK Smartphone Printer is designed for use

with INSTAX SQUARE instant print film only.

Unloading a Used INSTAX SQUARE Instant Film Pack

1 Slide the film door lock to open the film door�

2

1

2 Grasp the rectangular holes on the film pack, then

pull film pack out from the printer� Properly dispose

of used film pack�

2

1

6

Turning on/off the Printer

Press and hold the Power button for approximately 1 second to

turn the printer on or off.

The LED lights up when the printer is turned on.

If the printer remains idle without operation for 5 minutes, the

printer turns off automatically.

Checking the Printer Status with the LED

You can check the printer status with the LED.

Color LED status Status

Blue Flashing Firmware is being updated

Purple Flashing Reprinting

Yellow Lights up for 3

seconds, then

turns off

Low battery

* If this continues even after

charging, there may be a

malfunction. In such cases,

contact Fujifilm’s customer

support team or a

FUJIFILM authorized

dealer.

Yellow Continuous

flashing

Print error occurred

Please check to make sure

the film ejection slot is not

jammed and the film door is

securely closed.

* If this continues to occur,

contact Fujifilm’s customer

support team or a

FUJIFILM authorized

dealer for assistance.

Connecting Your Smartphone and Printer

Together and Printing

With the functions of the INSTAX SQUARE LINK Smartphone App,

you can edit your favorite Smartphone images before printing by

adding text, applying filters, and much more! See Page 4 on

how to install the INSTAX SQUARE LINK Smartphone App or check

out the following site: https://instax.com/square_link/

When Establishing Connection for the First Time

1 Press and hold the Power button for approximately

1 second to turn the printer on�

The LED lights up.

2 Start the downloaded INSTAX SQUARE LINK

Smartphone App�

7

3 Click through the below pop-up windows to set up

the printer�

4 Read the Terms of Use, check the [Agree] box and

tap the [Agree →] bar�

5 Quick instructions are displayed� Read the

instructions and tap [Let’s Play! →]�

8

6 Set up the Bluetooth connection between your

Smartphone and the printer�

[Bluetooth connection] can also be set in the process of

printing.

7 When a printer is detected, tap [Connect]�

If multiple printers are detected, select the printer you

would like to connect to from the list.

Locate the printer’s identifier (device name) on the bottom

of the printer.

Make sure the printer is on during this step. If not, turn the

printer on by pressing and holding the Power button for 1

second.

Note

If your Bluetooth settings are switched off, tap [Please turn

on Bluetooth] to put the Bluetooth settings on.

8 When the message is displayed, check the box and

tap [PAIR]�

9 When a printer is connected, tap [Close]�

10 You are now ready to use the printer� To select an

image to print, tap the [Simple Print] button on the

home screen and select an image from the photos

on your Smartphone�

To edit your image for printing, click on the below editing

options on the bottom of the screen before printing�

Enters text or attaches a sticker to the printed

image.

Zooms in/out or rotates the printed image.

Applies a filter on the printed image.

Adjusts the brightness of the printed image.

9

When the Printer and Your Smartphone Are Already

Connected

1 Press and hold the Power button for approximately

1 second to turn the printer on�

The LED lights up.

2 Start the downloaded INSTAX SQUARE LINK

Smartphone App�

3 You are now ready to use the printer� To select an

image to print, tap the [Simple Print] button on the

home screen and select an image from the photos

on your Smartphone�

To edit your image for printing, click on the below editing

options on the bottom of the screen before printing�

Enters text or attaches a sticker to the printed

image.

Zooms in/out or rotates the printed image.

Applies a filter on the printed image.

Adjusts the brightness of the printed image.

11 Tap or swipe the image up on the screen to print

your image�

After a slight transmission delay (roughly 12 seconds), the

printer starts printing.

You can also select the number of images to print during

image transfer.

12 When your photo has been ejected (the printer

stops making a sound), take it out of the printer by

grasping the edge of the photo� Your instant photo

will develop in roughly 90 seconds�

Confirm the number of images remaining in your loaded

INSTAX SQUARE instant film pack on the Smartphone App

screen.

10

4 Tap or swipe the image up on the screen to print

your image�

After a slight transmission delay (roughly 12 seconds), the

printer starts printing.

You can also select the number of images to print during

image transfer.

5 When your photo has been ejected (the printer

stops making a sound), take it out of the printer by

grasping the edge of the photo� Your instant photo

will develop in roughly 90 seconds�

Confirm the number of images remaining in your loaded

INSTAX SQUARE instant film pack on the Smartphone App

screen.

Reprinting an Image

The last image printed can be reprinted by pressing and holding

the function button for 2 seconds.

Note

When you turn off the printer, you will not be able to reprint the

image you last printed after you turn the printer back on. However,

you will be able to select and print the same image again from the

INSTAX SQUARE LINK App.

11

Taking a Photo with the INSTAX Camera Mode

in the App

You can take a photo using the INSTAX Camera Mode featured in

the App. You can use flash, switch between the front and rear

cameras, use a self-timer or add the date to your photo.

For details, see “FAQ” of the INSTAX SQUARE LINK App.

1 Select INSTAX Camera Mode�

2 Take a photo�

AR Print and INSTAX Connect App Features

With the AR Print App Feature, you can choose from various fun AR

(augmented reality) designs, filters, text and messages to add to

your printed INSTAX SQUARE photos.

With the INSTAX Connect App Feature, you can easily share your

INSTAX SQUARE photos with anyone, anywhere!

For more details, scan here.

https://instax.com/square_link/

Specifications

Recording method 3-color exposure with OLED

Film used FUJIFILM INSTAX SQUARE Instant Film

(sold separately)

Number of films 10 films/pack

Image size 2.4 in. x 2.4 in./62 mm × 62 mm

Exposure pixel

count

800 × 800 dots

Exposure resolution 12.5 dots/mm (318 dpi, 80 μm dot pitch)

Exposure gradation RGB gradation of 256 colors

Interface Bluetooth Ver. 4.2 (BLE)

Printable image

format

JPEG, PNG, HEIF, DNG

Print transmission

time

Approximately 12 seconds for

transmission and to start printing

* Image development time approximately

90 seconds

Possible number of

printed images

Approximately 100 (from full charge;

number of prints depends on the usage

conditions)

Power supply Lithium ion battery (internal type: not

removable)

Charging time Approximately 80 to 120 minutes

(depending upon environment

temperature at time of charging)

Power consumption Approximately 3 W

Operating

environment

Temperature: 41°F to 104°F (5°C to 40°C)

Humidity: 20% to 80% (no condensation)

Main unit

dimensions

4.1 in. × 1.5 in. × 5.0 in./105 mm × 37.5

mm × 127.5 mm (excluding projecting

parts)

Main unit weight Approximately 0.52 lbs / 236 g (excluding

film pack)

Supplied accessory USB cable

(Type-C, Length: 11.8 in./30 cm)

*The above specifications are subject to change.

12

Troubleshooting

Please check the following items before considering a problem to

be a malfunction. If the problem persists even after taking action,

please contact the Fujifilm service center for repair or visit the

website below.

https://instax.com/square_link/en/support/faq/

If the following problem occurs��

Problem Possible causes and solutions

I cannot turn on

the printer.

• The battery may not be charged. Please

charge the printer.

• You did not press the Power button long

enough. Press and hold the Power button

for approximately 1 second.

The battery loses

its charge

quickly.

If you use the printer in a very cold

environment, the battery will drain quickly.

Please keep the printer warm before

printing.

The printer

turned off during

use.

The battery level may be low. Please charge

the printer.

Charging does

not start.

Make sure that the USB power adapter plug

is properly connected to the power outlet.

It takes too long

to charge.

At low temperatures, charging may take

longer than what is normally experienced.

Charging does

not start or

prematurely

stops.

Charge the battery in a temperature range

of 41°F to 104°F (5°C to 40°C). If you cannot

charge the printer in this range, contact

your FUJIFILM authorized dealer or Fujifilm’s

customer support team.

The printer does

not work

properly.

• There may be a temporary malfunction.

Please press the reset button. If it still

does not work properly, please contact

our repair service center for repair.

• The battery may not be charged. Please

charge the printer.

The film pack

does not load or

does not load

smoothly.

• Please use FUJIFILM INSTAX SQUARE

instant print film only (INSTAX MINI or

INSTAX WIDE instant print film cannot be

used).

• Align the yellow mark on the film pack

with the printer alignment mark (yellow)

and load it in accordance with the

loading instructions above and on the

film pack.

The film does not

unload.

• The film may be misaligned due to shock

such as vibration or dropping. Please load

a new film pack.

• If the film is jammed, turn the printer off

and turn it on again. If the problem

persists, remove the jammed film and

then load a new film pack.

Problem Possible causes and solutions

Some or all of the

finished prints

are white.

Do not open the film door until you have

used all of the exposures on your INSTAX

instant film pack; otherwise, the remainder

of the film will become exposed and turn

white. Exposed instant film cannot be used

to print INSTAX images.

The image does

not fully develop.

• Do not shake, bend, fold or hold the

image immediately after it is printed.

• Do not obstruct the film ejection slot.

I cannot reprint

images.

Turn the printer on, select the desired

Smartphone photo, and try again.

13

IMPORTANT SAFETY NOTICE

This product has been designed with safety in mind, and to

provide safe operation when handled correctly and in

accordance with the instructions in this User’s Guide� It is

important that both the product and the INSTAX SQUARE

instant film pack are handled properly and used only to print

photos as instructed in this User’s Guide and in the

INSTAX SQUARE instant film pack instructions� For your ease and

safety, strictly follow the instructions in this User’s Guide� Keep

this User’s Guide in a safe, convenient place for easy future

reference as needed�

WARNING

This symbol indicates danger, which could result in product

damage, injury or death. Follow the instructions indicated to avoid

damage to the printer or injury.

WARNING

If one of the following cases occur, immediately unplug the

USB Type-C cable, turn the printer off and refrain from any

further use of the printer� Call the applicable Fujifilm customer

service center�

• The printer becomes hot, emits smoke, has a burnt smell, or

otherwise seems abnormal.

• The printer is dropped into water, or foreign objects like water,

sand, dirt or metal get inside the printer.

WARNING

The printer has a built-in battery� Do not subject it to heat,

expose it to an open flame, drop it, attempt to remove it, or

otherwise apply impact to it� Doing so may cause the printer to

explode, resulting in injury�

WARNING

Never attempt to take this product apart� You may be injured�

All repairs should be handled solely by Fujifilm� Injury may

result from attempts to self-assess or repair this printer�

If this product is dropped or damaged so that the inside is

showing, do not touch it� Contact Fujifilm’s customer support

team�

Do not touch any parts which are inside the film door� You

may be injured�

Never get this product wet or handle it with wet hands� Doing

so may result in electric shock and injury�

Promptly unplug the USB Type-C cable once battery is fully

charged� Printer will not over-charge�

Keep out of the reach of small children� This product could

cause injury in the hands of a child�

Do not cover or wrap the printer or USB AC power adapter in a

cloth or blanket, or otherwise place the printer in the sun or

an environment where heat may build up� This could distort

the casing or cause a fire�

Printer Care

■Handling the Printer

• CAUTION - Do not expose to excessive heat such as sunshine,

fire or the like during use, storage or transportation. An

explosion or leakage of flammable liquid or gas could result.

Also, ensure proper disposal in accordance with the instructions

below.

• CAUTION - Do not remove or attempt to remove the lithium

battery. Without limitation, do not expose or attempt to expose

the printer or the lithium battery to fire or a hot oven. Do not

attempt to damage, mechanically crush or cut the lithium

battery, as an explosion could result.

• CAUTION - Do not subject to extremely low air pressure at

high altitude. An explosion or the leakage of flammable liquid

or gas could result.

■Printer Care

1. Do not open the film door until you have used up the loaded

INSTAX SQUARE instant film pack� Doing so will expose the

remaining film and the film can no longer be used�

2. Your printer is a precision instrument. Do not get it wet or drop

it. Also, do not expose it to sand, dust or dirt.

3. Do not use cleaning products or solvents such as those with

bleach or alcohol to remove dirt. Wipe with a damp cloth if and

as necessary.

4. Keep the film chamber and printer interior clean to avoid

damaging the film.

5. In hot weather, do not leave your printer in hot places such as

in a car or on the beach. Do not leave it in damp places or

places where weather exposure could result.

6. Moth repellent gas such as naphthalene may affect your

printer and photo prints. Store your printer and photo prints in

a place where exposure to harmful cleaning or other

household elements will be avoided.

7. Note that the temperature range within which your printer can

be used is 41°F to 104°F (5°C to 40°C).

8. Take great care to ensure that your photo prints do not violate

copyright, image rights, privacy or other personal rights and

do not offend public decency. Actions that violate the rights of

others, that are contrary to public decency, or that constitute a

nuisance may be punishable by law or otherwise legally

actionable.

9. This printer is designed for personal/household and limited

commercial use. Download the free App to your Smartphone.

■Charging the Battery

The battery is not charged at shipment. Charge the battery

completely before use.

Charge the battery using the supplied USB Type-C cable and

the USB AC Adapter from your Smartphone. Charging times will

increase at ambient temperatures below 50°F (10°C) or above

95°F (35°C). Do not attempt to charge the battery in

environments with temperatures above 104°F (40°C); at

temperatures below 41°F (5°C), the battery will not charge.

14

■Battery Life

At normal temperatures, the battery can be recharged about

300 times. A noticeable decrease in the length of time the

battery will hold a charge indicates that it has reached the end

of its service life.

CAUTION - Handling the Battery

The battery and printer body may become warm to the touch after

extended use. This is normal.

■Required certification markings are located inside the film

chamber�

■Cautions During Printing

Do not shake the

printer while

printing.

Do not drop the

printer while

printing.

Do not cover the

film ejection slot

while printing.

■INSTAX SQUARE Instant Film and Print Care

This printer uses INSTAX SQUARE instant print film, sold separately.

See FUJIFILM INSTAX SQUARE instant film pack use instructions.

Follow all instructions for safe and proper use, including:

1. Keep the film in a cool place. Do not leave the film in a place

where the temperature is extremely high (e.g., in a closed car)

for many hours.

2. Do not puncture, tear, or cut INSTAX SQUARE instant film. If

film becomes damaged, do not use.

3. When you load a film pack, use the film as soon as possible.

4. If the film has been kept in a place where the temperature is

extremely high or low, bring it to room temperature before

loading or starting to print photos.

5. Be sure to use the film before the expiration or “Use Before”

date.

6. Avoid airport checked luggage inspection and other strong

X-ray illumination. Such exposure may cause fogging and

otherwise affect your unused film. Carrying your printer and

film onto an aircraft in your carry-on luggage is recommended.

(Check with each airport for more information.)

7. Avoid exposing the developed prints to strong light, and keep

them in a cool, dry place.

8. Do not puncture or cut the film as it contains a small amount

of caustic paste (high alkaline). Never let children or animals

put the film into their mouth. Also pay attention so that the

paste does not come into contact with skin or clothes. If the

paste inside the film comes into contact with skin or clothes,

immediately wash off with plenty of water. If the paste comes

into contact with the eyes or mouth, immediately wash the

area with plenty of water and contact a doctor. Note that the

alkaline inside the film remains active for about 10 minutes

after the photo has been printed.

Cautions on Handling INSTAX SQUARE Instant Film and Photo

Prints (film activities to be avoided):

15

For customers in the USA:

FCC ID : W2Z-03000010

FCC Statement

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) this

device may not cause harmful interference, and (2) this device

must accept any interference received, including interference

that may cause undesired operation.

For more information, access the website below.

https://instax.com/square_link/en/spec.html

CAUTION

This device has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur

in a particular installation.

If this equipment does cause harmful interference to radio or

television, which can be determined by turning the product off

and on, the user is encouraged to try to correct the interference

by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the product and receiver.

• Connect the product into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for

help.

FCC CAUTION

Changes or modifications not expressly approved by Fujifilm

responsible for compliance could void the user’s authority to

operate the equipment.

This transmitter must not be co-located or operated in

conjunction with any other antenna or transmitter.

Radiation Exposure Statement

This device meets the government’s requirements for exposure

to radio waves. This device is designed and manufactured not to

exceed the emission limits for exposure to radio frequency (RF)

energy set by the Federal Communications Commission of the

U.S. Government.

The exposure standard employs a unit of measurement known

as the Specific Absorption Rate, or SAR. The SAR limit set by the

FCC is 1.6 W/kg. Tests for SAR are conducted using standard

operating positions accepted by the FCC with the device

transmitting at its highest certified power level in all tested

frequency bands.

Notes on the Grant

To comply with Part 15 of the FCC Rules, this product must be

used with a Fujifilm-specified USB Type-C cable.

Bluetooth® Devices: Cautions

IMPORTANT: Read the following notices before using the

product’s built-in Bluetooth transmitter�

■Use only as part of a Bluetooth network�

Do not use in applications requiring a high degree of reliability,

for example in medical devices or other systems that may

directly or indirectly impact human life. When using the device

in computer and other systems that demand a greater degree

of reliability than Bluetooth networks, be sure to take all

necessary precautions to ensure safety and prevent

malfunction. FUJIFILM Corporation and its affiliates do not

accept liability for damages resulting from unauthorized use.

■Use only in the country in which the device was purchased�

This device conforms to regulations governing Bluetooth

devices in the country in which it was purchased. Observe all

location regulations when using the device. FUJIFILM

Corporation and its affiliates do not accept liability for problems

arising from use in other jurisdictions.

■Wireless data (images) may be intercepted by third parties�

FUJIFILM Corporation and its affiliates are not responsible for

intercepted transmissions, or for unintended image uses.

■Do not use the device in locations subject to magnetic fields,

static electricity, or radio interference�

Do not use the transmitter in the vicinity of microwave ovens or

in other locations subject to magnetic fields, static electricity, or

radio interference that may prevent reception of wireless

signals. Mutual interference may occur when the transmitter is

used in the vicinity of other wireless devices operating in the

2.4GHz band.

■The Bluetooth transmitter operates in the 2�4GHz band� The

maximum radio-frequency power is 8�28mW�

■This device operates on the same frequency as commercial,

educational, and medical devices and wireless transmitters�

It also operates on the same frequency as licensed transmitters

and special unlicensed low-voltage transmitters used in radio-

frequency identification tracking systems for assembly lines and

in other similar applications.

■To prevent interference with the above devices, observe the

following precautions�

Confirm that the radio-frequency identification transmitter is

not in operation before using this device. If you notice that this

device causes interference in low-voltage radio-frequency

identification tracing systems, contact a Fujifilm representative.

■The following may be punishable by law:

– Disassembly or modification of this device.

– Removal of device certification labels.

16

For proper disposal in the United States at product end-of-life,

please contact Fujifilm at 1-800-800-3854 Option #1 INSTAX.

For proper disposal in Canada at product-end-of-life, please

contact Fujifilm at 1-800-461-0416.

For proper disposal in Latin America at product end-of-life, please

contact your local FUJIFILM distributor or dealer for disposal

instructions.

Information for Fujifilm in the United States

FUJIFILM North America Corp.

200 Summit Lake Drive

Valhalla, New York 10595, USA

1-800-800-3854 Option #1 INSTAX

Information for Fujifilm in Canada

FUJIFILM Canada Inc.

600 Suffolk Court

Mississauga, Ontario L5R 4G4, Canada

1-800-461-0416

If you have any inquiries about this product, please contact a

FUJIFILM authorized dealer, or access the website below.

https://instax.com/square_link

FUJIFILM, INSTAX, INSTAX MINI, INSTAX WIDE, INSTAX SQUARE and

INSTAX SQUARE LINK are trademarks of FUJIFILM Corporation and

its affiliates.

The Bluetooth® word mark and logos are registered trademarks

owned by the Bluetooth SIG, Inc., and any use of such marks by

Fujifilm is under license.

Independent JPEG Group (IJG) Licenses

The software used in the INSTAX SQUARE LINK Smartphone Printer

is based in part on the work of the Independent JPEG Group.

For customers in CANADA:

IC : 7736B-03000009

ISED statement:

This device complies with Innovation, Science and Economic

Development Canada’s licence-exempt RSS(s). Operation is

subject to the following two conditions:

(1) This device may not cause interference, and

(2) This device must accept any interference, including

interference that may cause undesired operation of the

device.

CAUTION:

CAN ICES-003 (B)/NMB-003 (B)

This Class B digital apparatus complies with Canadian ICES-003.

Radiation Exposure Statement

The available scientific evidence does not show that any health

problems are associated with using low power wireless devices.

There is no proof, however, that these low power wireless

devices are absolutely safe. Low power wireless devices emit low

levels of radio frequency energy (RF) in the microwave range

while being used. Whereas high levels of RF can produce health

effects (by heating tissue), exposure of low-level RF that does not

produce heating effects causes no known adverse health effects.

Many studies of low-level RF exposures have not found any

biological effects. Some studies have suggested that some

biological effects might occur, but such findings have not been

confirmed by additional research. This device has been tested

and found to comply with ISED radiation exposure limits set

forth for an uncontrolled environment and meets RSS-102 of the

ISED radio frequency (RF) exposure rules.

Proper Disposal – US, Canada and Latin America

Disposal of Electric and Electronic Equipment in

Private Households

Disposal of used Electrical & Electronic

Equipment

(Applicable in the European Union and other

European countries with separate collection

systems)

This symbol on the product, or in the manual and in the warranty,

and/or on its packaging indicates that this product shall not be

treated as household waste.

Instead it should be taken to an applicable collection point for the

recycling of electrical and electronic equipment.

By ensuring this product is disposed of correctly, you will help

prevent potential negative consequences to the environment and

human health, which could otherwise be caused by inappropriate

waste handling of this product.

The recycling of materials may help to conserve natural resources.

For more detailed information about recycling of this product,

please contact your local city recycling office, your household

waste disposal service or the authorized FUJIFILM dealer from

which you purchased the product.

Fujifilm 16785547 User guide

Fujifilm 16785547 User guide

Related papers

Other documents