Keystone LDTR02 is a remote control system for winches with a range of up to 15 meters. It features two buttons for controlling the winch, one for sending out the rope and one for recycling it. The remote also has a power on/off button and a start button. To match the remote to the receiver, press and hold the power on button until the green light flickers, then press the learn button on the receiver until the red light flickers and a voice says "tick." The remote requires a DC2-3.0V power supply, while the receiver requires a DC9-15V power supply.
Keystone LDTR02 is a remote control system for winches with a range of up to 15 meters. It features two buttons for controlling the winch, one for sending out the rope and one for recycling it. The remote also has a power on/off button and a start button. To match the remote to the receiver, press and hold the power on button until the green light flickers, then press the learn button on the receiver until the red light flickers and a voice says "tick." The remote requires a DC2-3.0V power supply, while the receiver requires a DC9-15V power supply.
Keystone LDTR02 is a remote control system for winches with a range of up to 15 meters. It features two buttons for controlling the winch, one for sending out the rope and one for recycling it. The remote also has a power on/off button and a start button. To match the remote to the receiver, press and hold the power on button until the green light flickers, then press the learn button on the receiver until the red light flickers and a voice says "tick." The remote requires a DC2-3.0V power supply, while the receiver requires a DC9-15V power supply.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI