2. Eaton
  3. CJAU-01-04
CJAU-01-04

Eaton CJAU-01-04 User manual

  • Hello! I'm your chat assistant. I've analyzed the Instruction Leaflet for the Eaton Shutters/Blinds Actuator, models CJAU-01/04 and CJAU-01/04-I. This document details the installation, technical specifications, and basic operation of the device, including its 868.3 MHz RF capabilities, local input, and protection features. I'm here to help you with any questions you may have about these actuators.
  • What is the power supply for the actuator?
    What is the maximum load the actuator can handle?
    What is the RF frequency of the device?
1
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA_shutter_actuator_CJAU-01/04.qxd/11.2021a/IL019287ZU/136211216
© 2021 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / Printed in Austria
www.eaton.com/recycling
Shutters/Blinds Actuator
CJAU-01/04..
1.5 mm2
10 mm
0.75 mm²
10 mm²
°
%
3
Program
Mode
Actuator Type
CJAU-01/04
CJAU-01/04-I With local input
230VAC
CJAU-01/04-I
50Hz
3A
L N B A
+55°C*
-5°C
-25°C
+70°C
Technical Data / Technische gegevens / Tekniske data /
Technische Daten / Technická data
Power supply 230 VAC +10% -15%, 50 Hz
Load 3 A, L/R
Power standby < 200 mW (Typical)
Local input 230 VAC (Max. 265 V)
Input contact < 10 kΩ reliably ON
resistance In to L > 50 kΩ reliably OFF
Voltage difference < 1 V reliably ON
IN to L > 3 V reliably OFF
Protection Overload, Over-temperature
Dimensions 49.5 x 45.5 x 18 mm (H x W x D)
RF 868,3MHz (xComfort compatible)
Max RF power 25mW (ERP)
Instruction Leaflet
Montageanweisung
Notice d’installation
Instrucciones de montaje
Istruzioni per il montaggio

Инструкция по монтажу
Montagehandleiding

Montagevejledning
Οδηγίες εγκατάστασης
Instruções de montagem
Monteringsanvisning
Asennusohje
Návod k montáži
Paigaldusjuhend
Szerelési utasítás
Montāžas instrukcija
Montavimo instrukcija
Instrukcja montażu
Navodila za montažo
Návod na montáž
Монтажни инструкции
Instrucţiuni de montaj
Upute za montažu
Kullanma Talimatı
Инструкција за монтажу
Intruksjonsblad
Монтажна інструкція
ت ا ة
OFF
868.3 MHz
IP20
www.eaton.com/xcomfort
Slim 18 mm design
MRF Version 2.80
RM Version: 41a
SHC-RF Version: 2.00
ECI-RF Version: 2.00
USB-RF Version: 2.00
xComfort Bridge Version: 3.10
136211216_136211216 17.11.2021 13:57 Seite 1
2
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA_shutter_actuator_CJAU-01/04.qxd/11.2021a/IL019287ZU/136211216
© 2021 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / Printed in Austria
www.eaton.com/recycling
Basic mode
Assign Sensor in Basic Mode / Sensor in Basic Mode toewijzen / Tilknytte i Basic Mode /
Zuweisen im Basic Mode / Přiřadit v základním režimu
< 0.5 s
PROG
MODE
Current Mode
Wiring diagrams / Aansluitschema's / Koblingsskjemaer / Anschlussplan / Schéma zapojení
CJAU-01/04 CJAU-01/04-I
A: Orange / Oranje / Orange /
Orange / Orange
B: White / Wit / Weiss / Vit /
White
Remove Sensor in Basic Mode / / Sensor in Basic Mode verwijderen / Fjerne i Basic Mode /
Löschen im Basic Mode / Odstranit v základním režimu
Configure application mode / Toepassingsmodus configureren / Konfigurer applikasjonsmodus /
Anwendungsmodus konfigurieren / Konfigurace režimu aplikace
PROG
< 0.5s
MODE
PROG
< 0.5s
MODE
PROG
2x
< 0.5 s
PROG
< 0.5s
MODE
PROG
< 0.5s
MODE
PROG
5x
> 5 s
136211216_136211216 17.11.2021 13:57 Seite 2
3
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA_shutter_actuator_CJAU-01/04.qxd/11.2021a/IL019287ZU/136211216
© 2021 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / Printed in Austria
www.eaton.com/recycling
Identify in MRF /
Identificeren in MRF /
Identifiser i MRF /
Identifizieren im MRF /
Identifikace v MRF
Back to factory default /
Terug naar fabrieksinstellingen /
Tilbake til fabrikkinnstillinger /
Auf Auslieferungszustand zurücksetzen /
Zpět na tovární hodnoty
136211216_136211216 17.11.2021 13:57 Seite 3
4
Eaton Industries (Austria) GmbH, Eugenia 1, 3943 Schrems, Austria MA_shutter_actuator_CJAU-01/04.qxd/11.2021a/IL019287ZU/136211216
© 2021 by Eaton Industries (Austria) GmbH, www.eaton.eu/documentation All Rights Reserved / Printed in Austria
www.eaton.com/recycling
A
ffixing date of CE mark: 2021
Doc.
Id.: CJAU_01-04_11112021
Director Operations Director Quality
Friedrich Schröder
Gerhard Dischner
Declaration of Conformity
We, EATON Industries (Austria) GmbH
3943 Schrems, Eugenia 1
Austria
declare under our sole responsibility as manufacturer that the product (family)
Eaton - Shutters / Blinds Actuator UP
CJAU-01/04..
(the declaration of conformity applies to all
listed types within our actual product catalogue)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant manufacturer’s
instructions, installation standards and “good engineering practices”
complies with the provisions of Council directive(s):
RED Directive 2014/53/EU
RoHS Directive 2011/65/EU + 2015/863
based on compliance with following standard(s):
EN 300220-2 V3.2.1, EN 301489-3 V2.1.1, EN 301 489-1 V2.2.3, EN
IEC 63044-5-1:2019, EN IEC 63044-5-2:2019, EN IEC 63044-5-
3:2019, EN 60669-2-5:2016, EN 63000:2018
Schrems, 11.11.2021
136211216_136211216 17.11.2021 13:57 Seite 4
/