NutriBullet NBF50500 User guide

Category
Blenders
Type
User guide

This manual is also suitable for

User guide.
®
BLENDER
COMBO
3
GENERAL SAFETY
INFORMATION
Close supervision is necessary
when any appliance is used
by or near children. Keep cord
out of reach of children. This
appliance is not a toy. Do not
allow children to play with it.
• Do not use outdoors.
NEVER LEAVE THE
NUTRIBULLET® UNATTENDED
WHILE IT IS IN USE
 ALWAYS TURN THE
NUTRIBULLET® OFF WHEN
NOT IN USE
HEAT & PRESSURE
SAFETY
• Always use extreme care
and attention when using hot
ingredients in any blending
product, as the friction from
the rotating blades (during the
blending process) combined
with the thermal energy of the
heated ingredients can create
a dangerous situation if not
properly controlled.
Important safeguards.
Warning! To avoid the risk of serious injury, carefully read all
instructions before operating your NutriBullet®. When using any
electrical appliance, basic safety precautions should always be
observed, including the following important information.
Save these instructions!
FOR HOUSEHOLD USE ONLY
BLENDING WITH
NUTRIBULLET
®
CUPS:
To avoid personal
injury, never blend hot
ingredients or liquid in any
sealed NutriBullet® cup!
Heated ingredients can
pressurize sealed containers
when agitated and cause
cup and blade separation or
violently expel hot contents
upon opening. Always
start the blending process
with room temperature or
refrigerated ingredients and
liquids (21°C/70°F or cooler).
Never continuously
operate for longer than
necessary to create your
recipe — generally less
than one minute. Friction
from prolonged operation
can heat ingredients and
generate internal pressure
in the sealed container. This
pressure can cause the cup
and blade to separate or
blended contents to erupt
from the container, resulting
!
WARNING!
54
in possible personal injury
and/or property damage.
If the sealed NutriBullet®
cups are warm to the touch,
power o your machine
and allow the vessel to cool
for fifteen minutes or more.
Allow contents to settle
before slowly releasing the
cup from the motor base.
With the NutriBullet® cup,
pointed away from your face
and body, slowly unscrew the
easy-twist extractor blade
to gently release any
residual pressure.
If you need to blend for longer
than one minute, blend for
1-minute intervals. After
each 1-minute interval, allow
the motor base to shut o
completely and wait at least
one minute before starting
the next cycle. Do not run
for more than 3 consecutive
1-minute intervals to prevent
the contents from overheating.
Allow contents to settle for 2-3
minutes after the third blending
cycle to prevent overheating
and buildup of pressure.
Sugar in fruits and
vegetables can ferment over
time, releasing gases that
cause pressure to build up in
a sealed NutriBullet® cup. Do
not store any smoothies or
blended mixtures in vessels
sealed with the easy-twist
extractor blade. If you will
not consume your smoothie
immediately, remove the
easy-twist extractor blade
and cover your NutriBullet®
cup with plastic wrap
before refrigerating. If
your smoothie or blended
mixture was made in the
pitcher, transfer to another
storage container before
refrigerating. Never store
any blended mixture in a
sealed cup unrefrigerated, or
for any prolonged period of
time; contents will spoil and
ferment, producing gases
that might cause eruption.
Never blend carbonated
liquids or eervescing
ingredients (e.g., baking
soda, baking powder, yeast,
etc.). Pressure from released
gases can cause a sealed
blending container to burst,
resulting in possible injury
and/or property damage.
BLENDING WITH THE PITCHER:
Use extra caution when
blending hot liquids in
the pitcher.
Never turn the power on
while using the pitcher
without the vented lid cap
inserted and locked into the
pitcher lid, as ingredients
can splash, and if hot or
warm, could potentially
cause thermal injury and/or
property damage.
Steam and splattering
ingredients can escape
WARNING!
WARNING!
through the pitcher lid,
potentially scalding and/or
burning the user. NEVER blend
hot liquids in your pitcher
without the pitcher lid and
vented lid cap locked and
attached. The vented lid cap
allows steam and pressure
to escape, while guarding
against excess splashing.
NEVER blend hot liquids in
your NutriBullet® cups or any
other sealed vessel.
When blending hot liquids,
add liquid and solid
ingredients to your pitcher
below their respective MAX
lines. Attach the pitcher
lid with the vented lid cap
inserted and locked. Press
POWER and begin blending
on the LOW setting. Once
ingredients are integrated,
increase speed as needed.
If the NutriBullet® blends
for longer than one minute,
friction from the blades can
cause ingredients to heat and
generate internal pressure
inside the vessel. If a blending
vessel becomes warm to the
touch, turn o the machine
and allow the vessel to cool
completely before carefully
opening, pointed away from
your body to avoid injury.
BLADE SAFETY
Never store any easy-twist
extractor blade in the
motor base unattached
to a NutriBullet® cup. An
exposed blade can present
a laceration hazard.
Blades are sharp! Handle
carefully. Use care when
handling any blade. To
avoid laceration injury, do
not handle or touch any
blade edge.
AVOID CONTACT WITH
MOVING PARTS! Keep hands
and utensils out of and away
from blades while blending
food to reduce the risk of
severe personal injury.
TO REDUCE THE RISK OF
PERSONAL INJURY OR
PROPERTY DAMAGE,
never place the easy-twist
extractor blade on the
motor base without the cup
properly attached. Make
sure the easy-twist extractor
blade is securely twisted
(hand-tightened) onto the
NutriBullet® cup before
placing it on the motor
base and operating the
NutriBullet® Blender Combo.
Check to make sure the
easy-twist extractor blade
is aligned properly before
placing it on the motor
base and operating your
NutriBullet® Blender Combo.
After blending, turn the power
button o. Wait to remove the
NutriBullet® cup/easy-twist
extractor blade assembly
from the motor base until
WARNING!
WARNING!
76
the motor comes to a full
stop and the unit powers
down completely. Taking the
blending vessel o the unit
prior to complete power down
can cause damage to the
easy-twist extractor blade
coupling or motor gear.
Never use the NutriBullet®
Blender Combo without
adding liquid, as doing so
may damage the blades.
The cyclonic action® of your
NutriBullet® Blender Combo
requires the use of liquids
to make smoothies and
other nutritious items. The
NutriBullet® Blender Combo
is not intended to be used
without liquids, or as an
ice crusher. ALWAYS ADD
LIQUID to your recipe.
DO NOT USE the easy-twist
extractor blade for grinding
dry ingredients such as grains,
cereal, or coee, as this may
damage the motor and/or the
easy-twist extractor blade.
We recommend replacing your
easy-twist extractor blade
every 6 months (depending
on use) or as needed for
optimal performance.
PITCHER SAFETY
Always operate the pitcher with
the pitcher lid securely in place.
With recipes that require
certain ingredients to be
incorporated during blending,
first add the base ingredients,
seal the pitcher lid with vented
lid cap attached, and begin
blending. Then, once the
ingredients are well mixed,
twist open the vented lid cap
and carefully pour or drop
ingredients into the mixture.
If you need to push ingredients
closer to the blade, ONLY
USE THE TAMPER PROVIDED
with the NutriBullet® Blender
Combo. DO NOT use any
apparatus other than the
tamper to push ingredients
toward the blade. The tamper
is specifically designed not
to come in contact with the
blade. Spatulas, spoons
and other tools can make
contact with the blade, which
may result in damage to the
machine, damage to property,
and/or possible injury.
NEVER USE YOUR FINGERS
OR ANY PART OF YOUR HAND
TO PUSH INGREDIENTS
DOWN TOWARD THE BLADE.
Only use the provided tamper.
Remember to use extra
caution when blending hot
liquids or ingredients in
the pitcher.
Spray or escaping steam
may cause burns and/or
property damage.
Do not fill container above
the maximum capacity lines
indicated for liquids and
solid ingredients.
Always begin blending hot
ingredients on the LOW setting.
Keep hands and other exposed
skin away from lid opening to
prevent possible burns.
ELECTRICAL SAFETY
Do not use this product
in locations with dierent
electrical specifications or
plug types. Do not operate
with any type of plug
adapter or voltage converter
device, as these may cause
electrical shorting, fire,
electric shock, personal
injury, or product damage.
The use of attachments,
including canning jars, is
not recommended and may
cause fire, electric shock,
personal injury, or product
damage and will void the
product’s warranty.
To avoid the risk of electric
shock, never immerse the
cord, plug, or motor base
of the NutriBullet® Blender
Combo in water or other
liquids. Discontinue use if
the cord, plug, or motor
base is damaged.
Always POWER OFF and
UNPLUG the NutriBullet®
Blender Combo when it
is not in use or BEFORE
assembling, disassembling,
changing accessories, or
cleaning. Do not attempt
to handle the NutriBullet®
Blender Combo until all
parts have stopped moving.
Do not allow the cord to
hang over the edge of the
table or counter. Do not
pull, twist, or damage the
power cord. Do not allow the
cord to touch hot surfaces,
including the stove.
If the motor stops working,
unplug the motor base and
let it cool for at least 15
minutes before attempting to
use it again. Your NutriBullet®
has an internal thermal
breaker that shuts o the
motor when it overheats. The
thermal breaker will reset
when the unit is unplugged,
and the thermal breaker
cools down suciently.
POLARIZED PLUG INFORMATION:
Your NutriBullet® Blender
Combo has a polarized plug
(one prong is wider than the
other) to reduce the risk of
electric shock. This plug will
correctly fit in a polarized
outlet only one way. If the
plug does not fit fully in the
outlet, reverse the plug. If it
still does not fit, contact a
qualified electrician. For your
safety, do not modify the
plug or motor base in any
way. Doing so will increase
risk of injury and void the
product’s warranty.
• This appliance has important
markings on the plug. The
attachment plug or entire
cord set is not suitable for
replacement. If damaged, the
appliance will be replaced.
WARNING!
98
STOVETOP
HEATING SAFETY
Do not blend hot
ingredients in any sealed
NutriBullet® cup!
To heat items that have
been blended at room
temperature or cooler
(21°C/70°F or less), transfer
mixture to a stovetop
pot to heat. Always use a
thermometer to test the
internal temperature of
cooked ingredients; they may
feel cool to the touch, yet still
be hot inside.
The NutriBullet® Blender
Combo is not intended for
use on the stove top. Do not
place the motor base or any
NutriBullet® accessory on
the stove or microwave or
immerse in boiling water.
This may result in damage to
the accessory.
VENTILATION WARNINGS
To prevent a fire hazard,
power base openings
(underneath the motor base)
should be free of dust and
lint and never obstructed
with flammable materials
such as newspapers,
tablecloths, napkins,
dishtowels, place mats or
other similar type materials.
CAUTION! Always operate the
NutriBullet® Blender Combo
on a level surface, leaving
unobstructed space beneath
and around the motor base to
permit proper air circulation.
Vents on the bottom of the
product are provided for
ventilation to ensure reliable
motor operation and to
prevent overheating.
MEDICAL SAFETY
The information contained
in this User Guide or Recipe
Guide is not meant to replace
the advice of your physician.
Always consult your physician
regarding health and
nutrition concerns.
MEDICATION INTERACTIONS:
If you are taking any
medication, especially
cholesterol-lowering
medication, blood
thinners, blood pressure
drugs, tranquilizers, or
antidepressants, please
check with your physician
before trying any of the
recipes contained in this
guide or the recipe guide.
Avoid blending the following
seeds and pits in the
NutriBullet® Blender Combo,
as they contain a chemical
known to release cyanide
into the body when ingested:
apple seeds, cherry pits, plum
pits, peach pits, and apricot
pits. Fruit pits may also cause
damage to the pitcher.
ADDITIONAL
INSTRUCTIONS FOR
PROPER USAGE
Do not place any of the
NutriBullet® Blender Combo
parts in a microwave, oven, or
in a stovetop pot, or immerse
in boiling water, as this may
result in damage to the part.
TO AVOID LEAKAGE, DO
NOT OVERFILL THE
BLENDING VESSELS! The
pitcher is marked with two
MAX lines: one for solid
ingredients (higher line) and
one for liquid ingredients
(lower line). Your NutriBullet®
cups are also marked with
a MAX line. When filling
the blending vessels, make
sure your ingredients do not
exceed their respective MAX
lines. Exceeding the indicated
MAX lines can result in
leakage, and may lead to
dangerous pressurization.
Blending vessels and easy-
twist extractor blades are
specific to the exact model
of NutriBullet® Blender
Combo you possess. Use of
incompatible parts (parts
from other models) may
result in damage to your
NutriBullet® Blender Combo
or create safety hazards.
When ordering replacement
parts (NutriBullet® cups,
pitcher, easy-twist extractor
blades) on nutribullet.com or
via customer service, please
specify the machine model to
ensure you receive parts that
are compatible with your unit.
Periodically inspect all
NutriBullet® Blender Combo
components for damage
or wear that may impair
proper function or present an
electrical hazard. Make sure
that the power cord and plug
are undamaged. Discontinue
use and replace blending
vessels if you detect cracking,
cloudiness, or damage to
the plastic. Ensure that the
blades rotate freely and that
the structure is undamaged.
Make sure that the motor
base is unobstructed and
clean. Follow maintenance
recommended in the User
Guide and never operate
your NutriBullet® Blender
Combo with damaged
components. If your
NutriBullet® Blender Combo
malfunctions in any way,
immediately discontinue use
and contact customer service
at 1-800-523-5993. You may
purchase new NutriBullet®
cups, pitchers, and easy-
twist extractor blades
at nutribullet.com or by
contacting customer service.
Save these
instructions!
If you have any comments,
questions, or concerns, please
go to nutribullet.com.
Or call customer service at:
1-800-523-5993.
WARNING!WARNING!
!
1110
Contents.
12 Whats included
13 Assembly guide
14 Getting started
14 Safety guide
15 Pitcher assembly & use
18 NutriBullet® cup assembly & use
20 Blending control panel
21 How to use the blending control panel
22 Care & maintenance
22 How to clean the NutriBullet®
24 How to store
24 Replacement parts
25 NutriBullet® Blender Combo’s
one-year limited warranty
28 Warranty Registration
Thank you for purchasing the NutriBullet®
Blender Combo.
1312
What’s included. Assembly guide.
1 32-oz
cup
1 pitcher with
integrated blade
1 motor base
1 pitcher lid
with vented
lid cap
1 tamper
1 24-oz
handled cup
2 to-go lids
1 easy-twist
extractor blade
NutriBullet®
cup
vented lid cap
pitcher lid
pitcher
easy-pour spout
tamper
integrated blade
blender control
panel
motor base
suction cup feet
easy-twist
extractor blade
15
Use extra caution when
blending hot liquids in the
pitcher.
Steam and splatters can escape
through the vented lid, potentially
causing scalding and/or burns.
NEVER blend hot liquids in your
pitcher without the pitcher lid
and vented lid cap attached. The
vented lid cap is ventilated to allow
steam and pressure to release,
while guarding against excess
splashing. NEVER blend hot liquids
in your Nutribullet cups or any
other sealed vessel.
When blending hot liquids, add
liquid and solid ingredients to your
pitcher below their respective MAX
lines. Attach the pitcher lid with the
vented lid cap inserted. Press the
POWER icon, then begin blending on
the LOW setting. Once ingredients
are integrated and the mixture is
level (no splashing), increase speed
as needed.
PLEASE KEEP
THESE IMPORTANT
SAFEGUARDS IN
MIND WHEN USING
THE APPLIANCE:
Make sure the base is plugged in
for use.
DO NOT attempt to operate the pitcher
on the appliance without attaching
the pitcher lid and vented lid cap.
Never run the appliance while empty.
Appliance accessories are not
intended to be used in the microwave
as it may damage the accessories.
Never leave the appliance
unattended while in use.
Never blend hot liquids
when using any sealed
NutriBullet® cups.
Heated ingredients can pressurize
sealed containers when agitated
and violently expel hot contents upon
opening. Always start the blending
process with room temperature or
refrigerated ingredients and liquids
(21°C/70°F or cooler).
WARNING!
WARNING!
Getting started. Pitcher assembly
& use.
Place the pitcher onto the
motor base — handle facing
to the right of the blending
control panel, never towards
the back — and gently twist
clockwise so it locks in place.
When you hear the click, it’s
locked and ready to blend.
NOTE: If you are left-handed, place
the handle facing towards the center
of the blending control panel and
twist clockwise.
5
3Place the pitcher on a
clean, dry, level surface.
Add the ingredients to the
pitcher, making sure they do
not exceed the MAX line.
1 Review all warning and
caution statements in the
Important Safeguards
section (pg 3-9) and on
the previous page before
proceeding to Step 2.
Place the motor base on
a clean, dry, level surface
such as a counter or table.
4Place the pitcher lid with
vented lid cap attached on
the pitcher, making sure it’s
aligned to the handle.
NOTE: The blending pitcher is
marked with two MAX lines:
one for solid ingredients
(higher line) and one for
liquids (lower line). When filling
the blender, make sure your
ingredients do not exceed their
respective MAX lines.
2
14
1716
Twist pitcher counterclockwise
and lift o the motor base.
Pour and enjoy!
Press POWER to turn o
the unit completely.
If the ingredients stick to
the side of the pitcher, stop
the appliance by pressing
POWER and wait for
the blade to stop turning.
Then remove the pitcher
lid and use the tamper to
dislodge the ingredients.
When finished, replace the
lid and continue blending.
if the ingredients continue
to stick, consider adding a
little more liquid.
6
Plug the power cord into
an electrical outlet and
press POWER to turn on
the blender.
When you have reached
your desired consistency,
pause/stop the appliance
by pressing POWER or the
speed you selected and wait
for the blades to stop turning.
The unit will enter idle-mode.
The POWER button will
remain illuminated.
WARNING: Blades are sharp. Never
insert your hands into the pitcher.
8
9
11
10
7
To start blending, select
a speed or the EXTRACT
program on the blending
control panel. This program
will turn o automatically.
Buttons will illuminate while
in use.
NOTE: Proceed to the blending
control panel chart on page 20 for
speed definitions.
CAUTION: Do not use any
apparatus other than the
tamper to push ingredients
toward the blade. The tamper
is specifically designed not to
come in contact with the blade.
Spatulas, spoons and other
tools are long enough to reach
the blade, which may result
in damage to the machine,
damage to property, and
possible injury.
NOTE: If you need to add
additional ingredients while
blending, switch the setting to
LOW and remove the vented
lid cap from your pitcher lid,
leaving the lid attached. Add
ingredients through the hole
in the top of the lid, followed
by the tamper if necessary.
Replace the vented lid cap, then
increase to your desired speed.
DO NOT attempt to add items
through the vent hole when
blending hot ingredients.
18
Handle the easy-twist extractor
blade assembly with care, as
the blades are sharp.
Never leave the appliance
unattended while in use.
NEVER BLEND HOT LIQUIDS,
as doing so may cause
excessive pressure buildup,
resulting in risk of personal
injury and or property damage.
NutriBullet® cup
assembly & use.
WARNING!
Plug the power cord into
an electrical outlet and
press POWER to turn on
the blender.
5
Add ingredients to
the NutriBullet® cup.
NOTE: Do not overfill! To avoid
leakage, do not add ingredients
beyond the MAX line.
3
4
Twist the easy-twist
extractor blade onto the
cup until tightly sealed.
1 Review all warning and
caution statements in the
Important Safeguards
section (pg 3-9) before
proceeding to Step 2.
2 Place the motor base on
a clean, dry, level surface
such as a counter or table.
6
7
8
10
Turn the cup upside down
and place it onto the motor
base, gently turning the
cup clockwise to lock into
the motor base.
To start blending, select
a speed or the EXTRACT
program on the blending
control panel. This program
will turn o automatically.
Buttons will illuminate while
in use.
NOTE: Proceed to the blending
control panel chart on page 20 for
speed definitions.
When you have reached
your desired consistency,
pause/stop the appliance
by pressing POWER or the
speed you selected and wait
for the blades to stop turning.
The unit will enter idle-mode.
The POWER button will
remain illuminated.
NOTE: speeds will automatically
shut o after 60 seconds.
Unlock the assembly by
gently twisting the cup
counterclockwise. You will
hear a click. Enjoy!
NOTE: Blending should never take
longer than one minute to yield
smooth and creamy results.
Press POWER to turn o
the unit completely.
9
CAUTION
Do not remove the easy-twist
extractor blade from the
NutriBullet® cup until blending
has completely ceased. Do not
use the easy-twist extractor blade
as a storage lid for your cup.
Some foods may contain active
ingredients or release gases that
will expand if left in a sealed
container, resulting in excessive
pressure buildup that can pose
a risk of injury. When storing
contents in the cup, use plastic
wrap or foil to seal your container.
Always point contents away from
your body when unsealing.
19
2120
Blending control panel.
TURNING ON/OFF
The power button actuates
the master power of the
appliance. When pressed, this
button lights up to indicate the
motor is powered on, and the
other functions can be used.
Always turn the master power
o and unplug the unit when
the machine is not in use.
LOW SPEED
Use to mix thin batter,
gravies, marinades; scramble
eggs; process cooked foods
and uncooked fruits.
THE EXTRACT PROGRAM
Use to break down whole
fruits, vegetables, and ice into
nutrient-rich smoothies. This
button will activate a run cycle
that shuts o automatically.
WARNING!
NEVER BLEND HOT LIQUIDS IN ANY SEALED NUTRIBULLET® CUP Doing
so may cause excessive pressure buildup, resulting in risk of personal injury
or property damage. Hot items should only be blended in the pitcher using
proper safeguards.
MEDIUM SPEED
Use to cream soups, mix
dips, grind nuts, and
blend sauces, spreads,
mixed drinks, powdered
drinks, and milkshakes.
HIGH SPEED
Use to liquefy thick
mixtures and blend frozen
fruits and vegetables.
PULSE*
Use to control chopping
and processing.
WARNING: DO NOT use this
setting with hot ingredients!
How to use the blending control panel.
LOW, MEDIUM OR HIGH
Select a speed and press once
to turn on. The button will
illuminate. To pause/stop the
unit, press the button a second
time — it will de-illuminate — or
press POWER . While in the
idle-mode, the POWER button
will remain lit. To fully power
down after pausing, press
POWER and unplug the unit.
NOTE: If using the pitcher, speeds
will run until paused/stopped. If using
the NutriBullet® cups, speeds will
automatically shut o after 60 seconds.
THE EXTRACT PROGRAM
Press the EXTRACT button
and the NutriBullet® Blender
Combo will do the work for you.
This program automatically
stops at the end of its cycle. To
pause or stop the blender, press
EXTRACT again or POWER .
PULSE
Press and release the PULSE
button to chop ingredients. If
you hold this button down, it will
continue to run until you release it.
2322
Care & maintenance.
MOTOR BASE:
• To avoid risk of injury, NEVER
attempt to clean the actuator
system on the motor base
while the NutriBullet® Blender
Combo is plugged in.
Do not attempt to remove any
pieces from the motor base.
Use a sponge or dish cloth
dampened with warm soapy
water to wipe down the
motor base until clean.
If necessary, you may use
a small brush to scrub the
actuator system area to
ensure it’s clean.
To clean leakage residue
from the motor base, wipe
with a damp sponge and
warm water.
If necessary, you may use
a small brush to scrub the
actuator system area to
ensure it’s clean.
WARNING: Never submerge
the motor base in water.
Here’s how to clean
the NutriBullet®:
STEP 1:
The most important thing —
ALWAYS POWER OFF THE UNIT
and UNPLUG the motor base
from the power outlet when it
is not in use. Do not attempt to
handle the appliance until all
parts have stopped moving!
This includes during assembly
and disassembly, while
changing accessories during
cleaning, and any time you
leave the machine unattended.
STEP 2:
Detach the NutriBullet® cup /
easy-twist extractor blade or
pitcher from the motor base.
STEP 3:
Clean the individual
components (motor base,
easy-twist extractor blade,
NutriBullet® cups) as
recommended in the
following pages.
NUTRIBULLET® CUPS
& TOGO LIDS:
These items are TOP RACK
dishwasher-safe. We
recommend rinsing and briefly
scrubbing them with a dish
brush to remove any remaining
debris before placing in the
dishwasher. NEVER use the
sanitize cycle to wash the cups
— heat this high can warp
the plastic.
NUTRIBULLET® PITCHER:
WARNING: Blades are sharp!
Use caution when cleaning
the pitcher.
The pitcher is dishwasher-
safe. We recommend rinsing
and briefly scrubbing it with
a dish brush to remove any
remaining debris before
placing in the dishwasher.
NEVER use the sanitize cycle
to wash the pitcher — heat
this high can warp the plastic.
If preferred, hand-wash the
pitcher with soap and water.
Stuck-on ingredients might
require extra scrubbing from
a dish brush or sponge.
Regularly check the
structure of the pitcher and
twisting threads for cracking,
crazing, or breakage.
EASYTWIST
EXTRACTOR BLADE:
Blades are sharp! Handle
the easy-twist extractor
blade with care when
cleaning! It is best to clean
blades immediately after use
to reduce buildup of residue.
If food particles get stuck,
use a small brush or sponge
to target and dislodge them.
Do not remove any
components of the easy-
twist extractor blade; this
can result in permanent
damage to the blade,
resulting in leakage when
blending. If, over time, the
easy-twist extractor blade
becomes loose or damaged,
you may order a new easy-
twist extractor blade at
nutribullet.com or contact
customer service.
Dry the easy-twist extractor
blade completely after
every use.
Regularly check the
condition of the bottom
of the blade for cracking
or breakage. If damaged,
replace easy-twist extractor
blade immediately to prevent
possible personal injury.
Cleaning the NutriBullet® is easy. The pitcher is dishwasher-safe while
the cups and to-go lids are TOP RACK dishwasher-safe. The easy-
twist extractor blade and motor base can be quickly hand-washed
with soap and water. Read on for best practices.
2524
If damaged, replace
immediately to prevent
possible personal injury.
NEVER USE A PITCHER
THAT DOES NOT PROPERLY
ALIGN WITH THE BLADE.
Doing so may cause the
pitcher and motor base to
separate, exposing the
blade assembly and
potentially causing severe
personal injury.
TAMPER
Always hand-wash the
tamper with soap and water.
Stuck-on ingredients might
require extra scrubbing from
a dish brush or sponge.
STUBBORN CLEAN UP:
If ingredients get stuck to the
NutriBullet® cups, easy-twist
extractor blades, or pitcher,
heres an easy cleanup solution:
fill the vessel with room
temperature (21°C/70°F or less)
Replacement parts.
To order additional parts and accessories, please visit our website
at nutribullet.com/shop/accessories or feel free to contact
customer service: 1.800.523.5993.
water to its MAX line and add
1-2 drops of dish soap. For cups,
twist on the easy-twist extractor
blade, and blend on the motor
base for 20-30 seconds. For the
pitcher, attach lid and blend on
the motor base for the same
amount of time, 20-30 seconds.
This should loosen debris
enough to scrub away with
soap and water.
How to store:
Store the NutriBullet® Blender
Combo pitcher upright with the
pitcher lid secured on top. Do
not place anything on top of
the pitcher lid. Store remaining
pieces in a safe place where
they will not be damaged and
won’t cause harm.
WARNING: NEVER store the easy-
twist extractor blade on the motor
base without a NutriBullet® cup or
the pitcher as the exposed blades
pose a serious laceration hazard.
Nutribullet® Blender
Combo one-year
limited warranty.
LIMITED WARRANTY
FOR NUTRIBULLET®
NutriBullet's limited warranty
obligations are confined to the
terms set forth below:
NutriBullet, LLC (“NutriBullet”)
warrants this NutriBullet®
against defects in materials
and workmanship for a period
of one year from the date
of original retail purchase.
This limited warranty is valid
only in the country in which
the product is purchased
and comes with the product
at no extra charge, however
shipping and processing fees
will be incurred for returns,
replacements and or refunds.
If a defect exists, and
NutriBullet® is obligated under
this limited warranty, at its
option NutriBullet® will (1) repair
the product at no charge, using
new or refurbished replacement
parts, (2) exchange the product
with a product that is new or
that has been manufactured
from new or serviceable used
parts and is at least functionally
equivalent to the original
product, or (3) refund the
purchase price of the product. A
replacement product assumes
the remaining warranty of the
original product. A repaired
product has a one-year
warranty from the date of
repair. When a product or part
is exchanged, any replacement
item becomes your property
and the replaced item becomes
NutriBullet’s property. When a
refund is given, your product
becomes NutriBullet’s property.
OBTAINING WARRANTY
SERVICE
For limited warranty service,
simply call our customer
service department at 1-800-
523-5993 or contact us via
email from our website at
nutribullet.com, simply click
the contact us link, fill out and
submit the customer contact
form and we will be glad to
help you. When you contact our
customer service department
you will be asked for your
name, address, telephone
number and to provide proof of
2726
the original purchase (receipt)
containing a description of the
product(s), purchase date, and
the appropriate NutriBullet®
serial number(s). Before you
send your product for limited
warranty service please make
sure to keep a copy of all
relevant documents for your
files (receipt, etc.). It is always
recommended to purchase
product insurance and tracking
services when sending your
product for service. Remember,
shipping and processing fees
will be incurred and are not
covered by the one-year
limited warranty.
EXCLUSIONS & LIMITATIONS
This NutriBullet® One-Year
Limited Warranty applies only to
NutriBullet® products distributed
by or for NutriBullet® that can
be identified by the “NutriBullet”
trademark, trade name, logo
and bar code. NutriBullet®
Blender Combo’s One-Year
Limited Warranty does not apply
to any other products that may
appear to be authentic, but
were not distributed/sold by
NutriBullet, LLC.
Normal wear and tear is not
covered by this limited warranty.
This limited warranty applies
to consumer use only, and
is void when the product
is used in a commercial or
institutional setting.
This limited warranty extends
only to the original consumer
purchaser and is not
transferable. In addition, proof of
purchase must be demonstrated.
Repair or replacement of
the product (or, if repair or
replacement is not feasible, a
refund of the purchase price)
is the exclusive remedy of the
consumer under this limited
warranty. NutriBullet, LLC shall
not be liable for any incidental
or consequential damages for
breach of this limited warranty
or any implied warranty on
this product.
This limited warranty gives
you specific legal rights, and
you may also have other rights
which vary from state to state.
NutriBullet® is not liable for
any damage to products not
covered by this warranty (e.g.,
cups, book, User Guide).
This limited warranty does not
apply: (a) to damage caused
by accident, abuse, misuse,
or misapplication; (b) to
damage caused by improper
maintenance (including
unauthorized parts service);
(c) to a product or a part that
has been modified in any way;
(d) if any NutriBullet® serial
number or trademark has been
removed or defaced; and or (e)
if the product has been used
with an adapter/converter.
THIS LIMITED WARRANTY
AND THE REMEDIES SET
FORTH ABOVE ARE EXCLUSIVE
AND IN LIEU OF ALL OTHER
WARRANTIES, REMEDIES
AND CONDITIONS, WHETHER
ORAL OR WRITTEN, EXPRESS
OR IMPLIED. NUTRIBULLET®
SPECIFICALLY DISCLAIMS ANY
AND ALL IMPLIED WARRANTIES,
INCLUDING, WITHOUT
LIMITATION, WARRANTIES
OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR
PURPOSE. IF NUTRIBULLET
CANNOT LAWFULLY DISCLAIM
IMPLIED WARRANTIES UNDER
THIS LIMITED WARRANTY,
ALL SUCH WARRANTIES,
INCLUDING WARRANTIES
OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR
PURPOSE ARE LIMITED IN
DURATION TO THE DURATION
OF THIS LIMITED WARRANTY.
No NutriBullet® reseller, agent, or
employee is authorized to make
any modification to this warranty.
NUTRIBULLET IS NOT
RESPONSIBLE FOR DIRECT,
SPECIAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES
RESULTING FROM ANY
BREACH OF WARRANTY
OR CONDITION, OR UNDER
ANY OTHER LEGAL THEORY,
INCLUDING BUT NOT LIMITED
TO LOST PROFITS, DOWNTIME,
GOODWILL, DAMAGE TO
OR REPLACEMENT OF
EQUIPMENT AND PROPERTY.
NUTRIBULLET® SPECIFICALLY
DOES NOT REPRESENT THAT
IT WILL BE ABLE TO REPAIR
ANY PRODUCT UNDER THIS
LIMITED WARRANTY.
Some states and provinces
do not allow the exclusion
or limitation of incidental
or consequential damages
or exclusions or limitations
on the duration of implied
warranties or conditions,
so the above limitations or
exclusions may not apply to
you. This warranty gives you
specific legal rights, and you
may also have other rights
that vary by state or province.
28
Warranty registration.
How to find serial number
under the motor base.
Please visit nutribullet.com/
warranty-registration or call
1.800.523.5993 to register your
new NutriBullet® Blender
Combo. You will be asked to
enter the Serial Number* of
your product, along with the
purchase date and place of
purchase.
The registration will enable
us to contact you in the
unlikely event of product
safety notification. By
registering your product
you acknowledge to have
read and understood the
instructions for use, and
warnings set forth in the
accompanying instructions.
1.800.523.5993 | nutribullet.com
NutriBullet, LLC | www.nutribullet.com | All rights reserved.
NutriBullet and the NutriBullet logo are trademarks of CapBran Holdings, LLC
registered in the U.S.A. and worldwide.
Illustrations may dier from the actual product. We are constantly striving
to improve our products, therefore the specifications contained herein
are subject to change without notice.
190923_NBF50500
Guide de
l’utilisateur.
BLENDER
COMBO
®
3332
CONSIGNES GÉNÉRALES
DE SÉCURITÉ
Une surveillance étroite est
nécessaire lorsqu’un appareil
électrique est utilisé par
des enfants ou à proximité
d’enfants. Tenir le cordon
d’alimentation hors de portée
des enfants. Cet appareil
électrique n’est pas un jouet,
ne leur permettez pas de
jouer avec.
Ne pas utiliser à l’extérieur.
NE JAMAIS LAISSER LE
NUTRIBULLET® SANS
SURVEILLANCE PENDANT
SON UTILISATION
TOUJOURS ARRÊTER LE
NUTRIBULLET® LORSQUE
VOUS NE L’UTILISEZ PAS
Importantes mesures
de sécuri.
Avertissement ! Pour éviter tout risque de blessure grave, veuillez
lire attentivement toutes les instructions avant d’utiliser votre
NutriBullet®. Lorsque vous utilisez un appareil électrique, des
précautions d’utilisation élémentaires doivent toujours être
respectées, concernant notamment les informations suivantes:
Conservez ces instructions!
À USAGE DOMESTIQUE UNIQUEMENT
!
SÉCURITÉ THERMIQUE
& PRESSION
• Faites toujours preuve
d’extrême précaution et
attention lors de l’utilisation
d’ingrédients très chauds
dans tout appareil à mixer,
car le frottement des lames
rotatrices (pendant le
processus du mixage) combiné
avec l’énergie thermique des
ingrédients chaués peut
engendrer une situation
dangereuse si elle nest pas
correctement contrôlée.
LE MIXAGE AVEC LES
GOBELETS NUTRIBULLET
®
:
Pour éviter les blessures
corporelles, ne mixez
jamais des ingrédients ou
des liquides très chauds
dans un gobelet étanche
quelconque NutriBullet®!
Les ingrédients chaués
peuvent mettre les récipients
étanches sous pression
lorsqu’ils sont agités et
provoquer la séparation
des gobelets et des lames,
ou expulser violemment les
contenus très chauds lors
de l’ouverture. Commencez
toujours le processus de
mixage avec des ingrédients
et des liquides réfrigérés ou
à température ambiante (21°
C / 70°F ou plus frais).
Ne faites jamais marcher
l’appareil en continu plus
longtemps que nécessaire
pour réaliser votre recette —
généralement moins d’une
minute. La friction résultant
d’un fonctionnement prolongé
peut chauer les ingrédients
et générer une pression
interne dans le récipient
étanche. Cette pression peut
provoquer la séparation de
la tasse et la lame ou votre
smoothie mélange peut jaillir
du récipient, ce qui pourrait
entraîner des blessures
corporelles ou des dégâts
matériels. Si les gobelets
étanches NutriBullet® sont
chauds au toucher, éteignez
votre appareil et laissez le
récipient se refroidir pendant
au moins quinze minutes.
Laissez le contenu se reposer
avant de libérer lentement le
gobelet du socle électrique.
Dévissez lentement la lame
d’extraction facile à tourner
en orientant le gobelet
NutriBullet® éloigné de votre
visage et de votre corps, afin
de relâcher doucement toute
pression résiduelle.
Si vous avez besoin de
mixer pendant plus d’une
minute, mixez à intervalles
d’une minute. Après chaque
intervalle d’une minute,
laissez le socle électrique
s’éteindre complètement
et attendez au moins une
minute avant de commencer
le cycle suivant. Ne faites
pas marcher votre appareil
pendant plus de 3 intervalles
consécutifs d’une minute afin
d’empêcher une surchaue
des aliments. Laissez le
contenu se reposer pendant 2
à 3 minutes après le troisième
cycle de mixage afin d’éviter
toute surchaue et toute
accumulation de pression.
Le sucre contenu dans
les fruits et légumes peut
fermenter après un certain
temps, relâchant des gaz qui
provoquent une accumulation
de pression dans le gobelet
étanche NutriBullet®. Ne
stockez pas des smoothies
ou tout autre mélange dans
des récipients étanches
avec la lame facile à tourner
toujours en place. Si vous
n’allez pas consomme votre
smoothie immédiatement,
retirez la lame d’extraction
facile à tourner et couvrez
votre gobelet NutriBullet® avec
un film plastique avant de le
réfrigérer. Si votre smoothie
AVERTISSEMENT!
AVERTISSEMENT!
3534
des éclaboussures, ce qui
pourrait potentiellement
entraîner des blessures
thermiques ou des
dommages matériels.
La vapeur et les
éclaboussures émanant
des ingrédients peuvent
s’échapper par le couvercle
du pichet, et entraîner
éventuellement des brûlures
superficielles et / ou plus
sérieuses à l’utilisateur.
NE JAMAIS mixer des
liquides très chauds
dans votre pichet sans le
capuchon de ventilation du
couvercle en place et bien
verrouillé. Le capuchon
de ventilation permet à la
vapeur et à la pression de
s’échapper, évitant un excès
d’éclaboussures. Ne JAMAIS
mixer des liquides très
chauds dans les gobelets
NutriBullet®, ou dans tout
autre récipient étanche.
Lors du mixage de liquides
très chauds, ajoutez les
ingrédients liquides et solides
dans votre pichet sans
dépasser leur ligne MAX
respectives. Fixez le couvercle
du pichet avec son bouchon
de ventilation en place et
bien verrouillé. Poussez sur
POWER et commencer à
mixer à la vitesse LOW. Une
fois que les ingrédients sont
bien incorporés, ajustez la
vitesse si nécessaire.
ou votre mélange a été fait
dans le pichet, transférez-
le dans un autre récipient
de stockage avant de le
réfrigérer. Ne laissez jamais un
mélange que vous avez mixé
dans un gobelet étanche non
réfrigéré pendant une période
prolongée; les contenus se
gâteront et fermenteront,
provoquant des gaz qui
pourraient séchapper.
Ne jamais mixer des liquides
gazeux ou des ingrédients
eervescents (à savoir, du
bicarbonate de soude, de
la levure chimique, de la
levure, etc.). La pression
accumulée par la libération
des gaz peut provoquer
l’éclatement du gobelet,
entraînant d’éventuelles
blessures corporelles et / ou
des dégâts matériels.
LE MIXAGE DANS LE PICHET:
Faites preuve de prudence
supplémentaire lorsque
vous mixez des liquides
très chauds dans le pichet.
N’activez jamais l’appareil
lorsque le pichet est utilisé
sans le capuchon de
ventilation du couvercle
en place et bien verrouillé
sur le couvercle du
pichet, car les ingrédients
très chauds ou chauds,
pourraient provoquer
AVERTISSEMENT!
AVERTISSEMENT !
Si le NutriBullet® fonctionne
pendant plus d’une minute,
la friction des lames lors du
mixage peut augmenter
la chaleur des ingrédients
et générer une pression
interne dans le récipient. Si
le récipient devient chaud
au toucher, arrêtez l’appareil
et laissez le récipient se
refroidir totalement avant de
l’ouvrir avec précaution, et en
l’orientant loin de votre corps
pour éviter toute blessure.
SÉCURITÉ RELATIVE
AUX LAMES
Ne rangez jamais une lame
d’extraction facile à tourner
dans le socle électrique
non attachée à un gobelet
NutriBullet®. Une lame
exposée peut présenter des
risques de lacération.
Les lames sont tranchantes!
Manipulez-les avec
précaution. Soyez vigilants
lors de la manipulation
des lames. Afin d’éviter des
blessures par lacération, ne
pas manipuler ou toucher
l’arête de la lame.
ÉVITEZ LE CONTACT AVEC
DES PIÈCES EN MOUVEMENT!
Tenez vos mains et les
ustensiles à l’écart des
lames pendant le mixage
des aliments afin de réduire
les risques de blessures
corporelles sérieuses.
AFIN DE RÉDUIRE LES
RISQUES DE BLESSURES
CORPORELLES OU DE
DÉGÂTS MATÉRIELS,
assurez-vous que la
lame d’extraction facile
à tourner soit vissée de
façon sécurisée (serrée
à la main) sur le gobelet
NutriBullet® avant de les
placer sur le socle électrique
et de faire fonctionner votre
mélangeur NutriBullet®
Blender Combo. Vérifiez pour
vous assurer que la lame
d’extraction facile à tourner
est correctement alignée
avant de la placer sur le
socle électrique et de faire
fonctionner votre NutriBullet®
Blender Combo.
Á la fin du mixage, tourner
le bouton d’alimentation
pour éteindre l’appareil.
Attendez que le moteur se
soit totalement arrêté et que
l’appareil soit complètement
éteint pour retirer l’ensemble
gobelet / lame d’extraction
facile à tourner du socle
électrique. Retirer le récipient
de mixage avant la mise
hors tension complète peut
endommager l’assemblage
de la lame d’extraction facile
à tourner ou le moteur.
Ne faites jamais
fonctionner votre
mélangeur NutriBullet®
Blender Combo, sans
ajouter un liquide,
AVERTISSEMENT!AVERTISSEMENT!
3736
car ceci pourrait
endommager les lames.
Laction cyclonique® de votre
mélangeur NutriBullet®
Blender Combo nécessite
l’utilisation de liquides pour
préparer des smoothies
ou d’autres concoctions
nutritives. Le mélangeur
NutriBullet® Blender Combo
n’est pas conçu pour être
utilisé sans liquide ou pour
piler la glace. AJOUTEZ
TOUJOURS UN LIQUIDE à
votre recette.
N’UTILISEZ PAS la lame
d’extraction facile à tourner
pour broyer des ingrédients
secs tels que les légumineuses,
les céréales ou le café car
cela pourrait endommager
le moteur et / ou la lame
d’extraction facile à tourner.
Nous vous recommandons
de remplacer votre lame
d’extraction facile à tourner
tous les 6 mois (en fonction
de son utilisation) ou lorsque
cela savère nécessaire afin
d’optimiser ses performances.
SÉCURITÉ RELATIVE
AU PICHET
Toujours faire fonctionner le
pichet avec le couvercle du
pichet bien en place.
Pour les recettes qui
nécessitent que certains
ingrédients soient incorporés
au cours du mixage, ajoutez
d’abord les ingrédients de
base, fixez le couvercle du
pichet muni de son capuchon
de ventilation bien en place,
et commencer à mixer. Puis,
une fois que les ingrédients
sont bien mélangés, ouvrez
le capuchon du couvercle
de ventilation en le tournant,
et versez ou ajoutez
précautionneusement les
ingrédients dans le mélange.
Si vous avez besoin de
pousser des ingrédients
plus près de la lame,
UTILISEZ UNIQUEMENT LE
POUSSOIR CI-INCLUS avec
le mélangeur NutriBullet®
Blender Combo. NE PAS
utiliser quelqu’autre objet
pour pousser les ingrédients
vers la lame. Le poussoir est
spécifiquement conçu pour
ne pas entrer en contact
avec la lame. Les spatules,
cuillères ou autres outils
peuvent entrer en contact
avec la lame, ce qui pourrait
provoquer des dommages
à l’appareil, des dégâts
matériels et/ou d’éventuelles
blessures corporelles.
NE JAMAIS VOUS SERVIR DE
VOS DOIGTS OU D’UNE TOUTE
AUTRE PARTIE DE VOTRE
MAIN POUR POUSSER LES
INGRÉDIENTS VERS LE BAS DE
LA LAME. Utilisez uniquement
le poussoir ci-inclus.
Souvenez-vous d’être
encore plus vigilant
lorsque vous mixez des
liquides ou des ingrédients
très chauds dans le pichet.
La vapeur qui jaillit ou qui
s’échappe peut provoquer
des brûlures et / ou des
dégâts matériels.
Ne pas remplir le récipient
au-delà des lignes de
capacité maximale indiquées
pour les liquides et les
ingrédients solides.
Toujours commencer à mixer
les ingrédients très chauds à
la vitesse LOW.
Tenez vos mains et les autres
parties exposées de votre
peau loin de l’ouverture du
couvercle pour éviter de
possibles brûlures.
SÉCURITÉ RELATIVE À
LÉLECTRICITÉ
N’utilisez pas cet appareil
dans des endroits où les
spécifications électriques
ou les types de fiches sont
diérents. Ne le faites
pas fonctionner avec
un adaptateur de prise
ou un convertisseur de
tension quelconque, car
ces utilisations pourraient
provoquer un court-circuit, un
incendie, un choc électrique,
des blessures corporelles ou
des dégâts à l’appareil.
L’utilisation d’accessoires,
notamment de bocaux,
n’est pas recommandée
et pourrait provoquer un
incendie, un choc électrique,
des blessures corporelles ou
des dégâts à l’appareil, ce
qui annulerait et la garantie
sur l’appareil.
Pour éviter tout risque
de choc électrique, ne
jamais plonger le cordon
d’alimentation, la fiche
ou le socle électrique du
mélangeur NutriBullet®
Blender Combo dans de l’eau
ou dans tout autre liquide.
Cessez toute utilisation si le
cordon d’alimentation, la
fiche ou le socle électrique
est endommagé.
ÉTEIGNEZ et DÉBRANCHEZ
toujours le mélangeur
NutriBullet® Blender Combo
lorsqu’il nest pas utilisé ou
AVANT de l’assembler, de
le démonter, de changer
d’accessoires ou de le
nettoyer. N’essayez pas de
manipuler votre mélangeur
NutriBullet® Blender Combo
avant que toutes les pièces
n’aient cesser de tourner.
Ne laissez pas le cordon
d’alimentation pendre du
bord de la table ou du
comptoir de cuisine. Ne
tirez pas sur le cordon
d’alimentation, ne le laissez
pas s’entortiller ou sabîmer.
Ne laissez pas le cordon
d’alimentation toucher
des surfaces chaudes,
notamment la cuisinière.
AVERTISSEMENT!
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34

NutriBullet NBF50500 User guide

Category
Blenders
Type
User guide
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages