2. The Home Depot
  3. Go-46203

The Home Depot Go-46203 User manual

  • Hello! I've reviewed the user manual for the Cesicia 3 LIGHT vanity light. This document provides instructions for installing the fixture, which can be mounted up or down. It also specifies the use of G9 bulbs and includes steps for mounting and connecting wires. I'm ready to answer any questions you have about this product.
  • What type of bulbs are used in the fixture?
    Can the fixture be installed in two ways?
    What should I do before starting installation?
Wall Mounting Screw Socket Ring
4
Tool
1
GG
3 LIGHT VANITY LIGHT
*This Fixture Can Be Installed Up or Down In Two Ways
C
3
G9 Bulb
HH
Socket Ring
4
D
Cesicia
C
GG
GG
HH
D
1.Remove two mounting screws (FF) to separate
the mounting bracket(B) from back plate(A).
2
2.Fix the mounting bracket(B) to the wall.
Attach the mounting bracket(B) to the
outlet box by using two mounting screws(AA).
Insert lanyard clip (E) into bracket
slot to release hands to connect wires.
6. Install inner crystal shade
(D) and G9 bulbs(HH)
Put the socket ring(EE) into
the tool(GG), Slip the shade
(D) into the socket and
fastened the shade (D) by the
socket ring(EE) with the tool(GG).
Insert the G9 bulb(HH)into the socket.
5. Install the outer clear glass shade (C)
Put the socket ring(DD) into the tool(GG), slip the
shade (C) into the socket and fastened the shade
(C) by the socket ring(DD) with the tool(GG).
3
4
6
5
3.Connect fixture black wire to house black wire and
fixture white wire to house white wire using wire
nuts(BB) provided. Connect the copper wire on
the light fixture to the mounting bracket(B) by
securing it with the pre-installed
grounding screw(CC), and then
connect it to the house
grounding wire with wire
nut(BB).
Tuck all the wires into outlet box.
4.Attach the back plate(A) to the mounting
bracket(B), and then secure it with mounting
screws (FF).
/