2. Avtech
  3. DGM5107T
DGM5107T

Avtech DGM5107T User guide

  • Hello! I'm your chat assistant. I have reviewed the motion detection setup guide for AVTECH starlight 5MP IP camera models DGM5107T, DGM5407T, DGM5547T, and DGM5447T. The document provides step-by-step instructions on enabling motion detection, configuring detection areas, and saving settings. If you have any questions regarding this, feel free to ask and I would be happy to assist.
  • How do I activate the motion detection feature?
    How can I adjust the motion detection area?
    Where can I save all adjustments?
MOTION DETECTION SETUP GUIDE:
DGM5107T, DGM5407T, DGM5547T, and DGM5447T.
Motion Detection function is a feature present in all models of our starlight 5MP IP models, in order to
activate and configure this feature please refer to the below steps:
1. Go to the CONFIGURATION page of the camera.
2. Go to EVENT and then to MOTION DETECT.
3. Make sure to check the ENABLE box in order to activate this feature.
4. In order to adjust the area of motion detection click on the SETUP button next to DETECTION
5. After clicking on the SETUP button, the DETECTION AREA page will come up.
- You may add a motion area by dragging from left to right, or you may remove a motion area
by dragging from right to left.
- You may adjust relevant settings to the detection area with the options on the right.
6. After all changes have been made make sure to press the button OK to save them.
/