Howard Miller 497277 Operating instructions

Type
Operating instructions
INSTRUCTIONS
Follow the procedures below to match the
hour strike count with the position of the
hour hand.
REPLACING BATTERIES (follow steps in order)
1. Remove both batteries.
2. Using the handset knob, set the hands to
5:50. AM or PM not important until Step 4.
3. Install alkaline batteries.
4. Using the handset knob, rotate hands
forward (clockwise) from 5:50AM to the
current time.
DAYLIGHT SAVINGS TIME CHANGE
SPRING: Rotate hands forward (clockwise)
one hour.
FALL: Follow the 4-step instructions above for
REPLACING BATTERIES.
HOUR STRIKE COUNT DOES NOT MATCH THE
HOUR HAND POSITION
Follow the 4-step instructions above for
REPLACING BATTERIES.
497277
  • Page 1 1

Howard Miller 497277 Operating instructions

Type
Operating instructions

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI