Fagerhult 100 Installation guide

Type
Installation guide
SE - 566 80 Habo
Zoft LED
Det är lämpligt att denna information
överlämnas till användaren av anläggningen.
It is appropriate that this information
is passed on to the users of the installation.
Diese informationen sind für den
Benutzer der Anlage vorgesehen.
SGB
DSF Nämä ohjeet tulee säilyttää ja luovuttaa
kiinteistön käyttäjälle.
4835426 Utgåva/Edition 07
100
50
205
550
N12
N LPUSH L
1
2
mm2
8
12
0,5-1,0
1,5-2,5
mm
ALT.
mm2
8
12
0,5-1,0
1,5-2,5
mm
Pulse control; Out of phase
One or more luminaries are dimming opposite to the rest. This is caused by too fast push/pull maneuvers of
Pulse control
DA / N
DA / Ls
D1
+D2
N
L
DIMMABLE
N12
N LPUSH L
PUSH L=Phase puls control
If the push button has removed,
must device be reset.
Short ciircuit 1-10v port for min 2 sec
to reset the device
D1
+D2
N
L
N
LDA DA
DALI
Zoft wall H310
Only Dali, no phase puls control
LN
L
N
DA+
DA- Grundläggande isolering mellan
nät och styr ledning.
S
GB Basic insulation between
mains and control wiring.
Ljuskällan ska enbart bytas ut av
tillverkaren eller hans utsedda person.
The light source shall only be replaced by the
manufacturer or his designated person.
GB
SLjuskälla och drivdon ska enbart bytas ut av
tillverkaren eller dess utsedda person.
The light source and control gear shall only
be replaced by the manufacturer or its
designated person.
  • Page 1 1

Fagerhult 100 Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages