I-7188EX C Language Based Embedded Controller- QuickStart (Feb/2016)
ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717
1
I-7188EX-512
C Language Based Embedded Controller
Quick Start Guide
Product Website:
http://www.icpdas-usa.com/i_7188ex_512.html
Introduction
The I-7188EX is powered by 80188-40 processor with 512K bytes of static RAM, and
512K bytes of Flash memory. One serial RS-232 port and one RS-485 port are provided.
Ethernet support is provided by a NE-2000 compatible controller with 16K bytes of on-
chip buffer memory and 10Base-T media interface. The I-7188EX also provides 14 user
defined I/O lines. A cost-effective I/O expansion board with A/D, D/A, relay drivers and
protected inputs is available. The I-7188EX also supports battery back-up SRAM disk
board and Flash-Rom board, providing non-volatile mass storage from 2 megabytes to
64 megabytes. The 10BASE-T port is equipped with a RJ-45 connector. The 10BASE-T
interface supports max 100-meter Cable length between I-7188EX and the network hub.
This Guide offers information to guide you
Step 1 ~ Step 4 - Start-up your device
Step 5 ~ Step 7 - Configure device’s Ethernet settings
Step 8 ~ Step 11 - Download program to your device.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
ICP DAS USA NS-208 - 8-port Industrial Unmanaged Ethernet Switch Quick Start
-
-
-
-
ICP DAS USA SG-3016-80 Quick Start
-
-
-
ICP DAS USA I-7188E2 Quick Start
-
-
ICP PIR-230-E Quick Start