Fuji Xerox TL-WR702N Setup Manual

Fuji Xerox
Brand
Fuji Xerox
Model
TL-WR702N
Category
Routers
Type
Setup Manual
Updated On 3 Apr 2013. Version 1.1
1
External Wireless Repeater Setup Guide (Windows)
Purpose: To connect a wired network printer to a wireless router.
Setup Requirements
Sno
Item
Remark
1
Repeater
Suggested model:
TL-WR702N
2
Fuji Xerox Network Printer
Suggested model:
DPCM305df
3
Wireless Computer
Customer’s item
4
Wireless Router
Customer’s item
5
Wireless Router SSID
Customer to provide
6
Wireless Router Password
Customer to provide
7
Wireless Router Encryption Type
Customer to provide
8
Wireless Router MAC Address
Customer to provide
External Wireless Repeater Setup Overview
Repeater
(Eg. TL-WR702N)
Fuji Xerox Printer
(Eg. DocuPrint CM305 df)
Wireless Router
Updated On 3 Apr 2013. Version 1.1
2
Steps:
(1) Connect the Repeater to the Computer by using a network cable (network cable comes with the
Repeater). Connect the AC Power Supply and turn ON the Repeater.
(2) Define an IP Address for your Computer (Eg. 192.168.0.88).
NOTE: The Repeater uses the default IP Address of 192.168.0.254.
For Windows XP: Go to [Control Panel] [Network Connection] [Local Area Connection]
[Internet Protocol (TCP/IP)] [Properties]
For Windows 8: Go to [Control Panel] [Network and Internet] [Network and Sharing
Center] [Change adaptor settings] [Ethernet] [Internet Protocol Version 4 (TCP/IP)]
[Properties]
Updated On 3 Apr 2013. Version 1.1
3
(3) Launch any web browser (Eg. Internet Explorer). Input the Repeater’s default IP Address as
“192.168.0.254”. When prompted for Username/Password, input the default Username=”admin”
and Password=”admin”.
(4) Select [Quick Setup] and click on [Next]. Select the option as [Repeater]. Click on [Next].
(5) Select [Survey] and choose your Wireless Router SSID (auto-detected). Click on [Connect].
Updated On 3 Apr 2013. Version 1.1
4
(6) Input the addition network information as follows and click on [Next]. Reboot the Repeater.
(7) On your computer, change the [Internet Protocol (TCP/IP)] to its original setting.
(8) Unplug the network cable from the Repeater and plug it into the Printer’s network port.
(9) Reboot the Printer and the Printer is now on the wireless network. Proceed with the Printer Driver
installation as usual.
NOTE:
(1) The above steps are based on the standard wireless settings.
(2) For TP-LINK product and support-related matters, please visit
http://www.tp-link.com/en/support/
Disclaimer: The external Wireless Adaptor (TL-WR702N) is NOT a Fuji Xerox product.
Select the right Region
Select the right Security
Option
Input the Router Password
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4

Fuji Xerox TL-WR702N Setup Manual

Fuji Xerox
Brand
Fuji Xerox
Model
TL-WR702N
Category
Routers
Type
Setup Manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents