Russell Hobbs 23830-70 User manual

Type
User manual
I www.georgeforemangrills.com
23830-70
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
AE
r
3
Read the instructions, keep them safe, pass them on if you pass the appliance on. Remove all packaging
before use.
IMPORTANT SAFEGUARDS
Follow basic safety precautions, including:
This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and
understand the hazards involved. Children shall not play with the
appliance. Cleaning and user maintenance shall not be made by
children unless they are older than 8 and supervised. Keep the
appliance and its cord out of reach of children aged less than 8 years.
Keep the appliance and cable out of reach of children under 8 years.
h
The surfaces of the appliance will get hot.
If you overll, the kettle may spit boiling water.
Use the kettle only with the stand supplied (and vice versa).
If the cable is damaged, return the appliance, to avoid hazard.
Don’t put the kettle, stand, cable, or plug in liquid.
Keep the kettle, stand, and cable away from the edges of worktops.
Don’t use the kettle for any purpose other than heating water.
Don’t operate the appliance if its damaged or malfunctions.
HOUSEHOLD USE ONLY
PARTS
1. Filter
2. Lid
3. Lid release
4. Switch
5. Stand
BEFORE USING FOR THE FIRST TIME
Fill to max, boil, discard the water, then rinse. Do this twice to remove any manufacturing dust, etc.
FILLING
1. Open the lid.
2. Fill with at least 1 cup of water, but not above max.
3. Close the lid. Always close the lid when boiling the kettle.
USING YOUR KETTLE
1. Put the stand on a stable, level surface.
2. Plug the stand into the wall socket.
3. Put the kettle on the stand.
GB
DE
FR
NL
IT
ES
PT
DK
SE
NO
FI
RU
CZ
SK
PL
HR
SI
GR
HU
TR
RO
BG
AE
4
4. Move the switch to I.
5. The light will come on and the kettle will start to heat up.
6. When the water boils the kettle will switch o.
7. To switch o manually, move the switch to O, or simply lift the kettle o the stand.
GENERAL
When you lift the kettle, you may see moisture on the stand. Don’t worry – its the steam used to switch o
automatically, which then condenses and escapes via vents under the kettle.
BOIL DRY PROTECTION
If your kettle boils dry, a safety cut-out device will automatically switch it o. If this happens, unplug your
kettle and allow it to cool down until the cut-out resets itself. Allowing your kettle to boil dry will shorten
the life of the element.
CARE AND MAINTENANCE
1. Unplug the stand, and let the kettle cool before cleaning.
2. Wipe all surfaces with a clean damp cloth.
3. Keep the connectors dry.
4. Open the lid and slide the lter out of the kettle.
5. Rinse the lter under a running tap while brushing with a soft brush.
6. Slide the lter back into the kettle until it clicks.
7. Close the lid.
Descale regularly, at least monthly
Descale the appliance at least monthly with a proprietary descaler. Follow the instructions on the package
of descaler.
Products returned under guarantee with faults due to scale will be subject to a repair charge.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32
  • Page 33 33
  • Page 34 34
  • Page 35 35
  • Page 36 36
  • Page 37 37
  • Page 38 38
  • Page 39 39
  • Page 40 40
  • Page 41 41
  • Page 42 42
  • Page 43 43
  • Page 44 44
  • Page 45 45
  • Page 46 46
  • Page 47 47
  • Page 48 48

Russell Hobbs 23830-70 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI