LG FJ5 Owner's manual

OWNER’S MANUAL

High Power

Speaker System

Please read this manual carefully before operating

your set and retain it for future reference.

MODEL

FJ5

*MFL00000000*

www.lg.com

1 Getting Started

Getting Started

2

Getting Started

1

Safety Information

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE REFER

SERVICING TO QUALIFIED SERVICE PERSONNEL.

This lightning ash with arrowhead

symbol within an equilateral

triangle is intended to alert the

user to the presence of uninsulated

dangerous voltage within the

product’s enclosure that may be of

sufcient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an

equilateral triangle is intended

to alert the user to the presence

of important operating and

maintenance (servicing)

instructions in the literature

accompanying the product.

WARNING: TO PREVENT FIRE OR ELECTRIC SHOCK

HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN

OR MOISTURE.

CAUTION: The apparatus should not be exposed to

water (dripping or splashing) and no objects lled

with liquids, such as vases, should be placed on the

apparatus.

WARNING: Do not install this equipment in a

conned space such as a book case or similar unit.

CAUTION: Do not use high voltage products around

this product. (ex. Electrical swatter) This product may

malfunction due to electrical shock.

CAUTION: Do not block any ventilation openings.

Install in accordance with the manufacturer’s

instructions.

Slots and openings in the cabinet are provided for

ventilation and to ensure reliable operation of the

product and to protect it from over heating. The

openings shall be never be blocked by placing the

product on a bed, sofa, rug or other similar surface.

This product should not be placed in a built-in

installation such as a bookcase or rack unless

proper ventilation is provided or the manufacturer’s

instruction has been adhered to.

NOTICE: For safety marking information including

product identication and supply ratings, please refer

to the main label on the bottom or the other surface

of the product.

Getting Started

3

Getting Started

1

CAUTION concerning the Power Cord

The Power Plug is the disconnecting device. In case

of an emergency, the Power Plug must remain readily

accessible.

Check the specication page of this owner’s manual

to be certain of the current requirements.

Do not overload wall outlets. Overloaded wall outlets,

loose or damaged wall outlets, extension cords,

frayed power cords, or damaged or cracked wire

insulation are dangerous. Any of these conditions

could result in electric shock or re. Periodically

examine the cord of your device, and if its appearance

indicates damage or deterioration, unplug it,

discontinue use of the device, and have the cord

replaced with an exact replacement part by an

authorized service center. Protect the power cord

from physical or mechanical abuse, such as being

twisted, kinked, pinched, closed in a door, or walked

upon. Pay particular attention to plugs, wall outlets,

and the point where the cord exits the device.

This device is equipped with a portable battery or

accumulator.

How to Safely remove the battery or the battery

pack from the equipment: To remove the old

battery or battery pack, follow the assembly steps

in reverse order. To prevent contamination of the

environment and bring on possible threat to human

and animal health, the old battery or the battery

put it in the appropriate container at designated

collection points. Do not dispose of batteries

or battery pack together with other waste. It is

recommended that you use local, free reimbursement

systems batteries and accumulators. The battery

shall not be exposed to excessive heat such as

sunshine, re or the like.

CAUTION: No naked ame sources, such as lighted

candles, should be placed on the apparatus.

Symbols

~

Refers to alternating current (AC).

0

Refers to direct current (DC).

Refers to class II equipment.

1

Refers to stand-by.

!

Refers to “ON” (power).

Refers to dangerous voltage.

Table of Contents

4

Table of Contents

1 Getting Started

2 Safety Information

6 Unique Features

7 Playable file Requirement

7 – Music file requirement

7 – Compatible USB Devices

7 – USB device requirement

8 Remote control

10 Top panel

11 Front panel / Rear panel

12 How to place the unit

2 Connecting

13 AC Power Cord Connection

14 Optional Equipment Connection

14 – AUX IN Connection

14 – Listening to music from your external device

14 – USB Connection

15 – Antenna Connection

3 Operating

16 Basic Operations

16 – USB Operations

17 – Selecting a folder and an MP3/WMA file

18 – Deleting a file/folder or format

19 Using BLUETOOTH® wireless technology

19 – Listening to music stored on the Bluetooth

devices

22 Using the Music Flow Bluetooth App

22 – About “Music Flow Bluetooth” App

22 – Install “Music Flow Bluetooth” App onto

Your Bluetooth Device

23 – Activate Bluetooth with “Music Flow

Bluetooth” App

24 Radio Operations

24 – Listening to the radio

24 – Improving poor FM reception

24 – Presetting the Radio Stations

24 – Deleting all the saved stations

25 Sound adjustment

25 – Setting the sound mode

26 – JUKE BOX Playback

27 Other Operations

27 – Turn off the sound temporarily

27 – Displaying file information (ID3 TAG)

27 – DEMO

28 – Using Microphone

30 – LIGHTING

30 – Auto power down

31 – AUTO POWER On

31 – Auto function change

32 LG Sound Sync

33 WIRELESS PARTY LINK Connection

Table of Contents

5

1

2

3

4

5

4 Troubleshooting

34 Troubleshooting

5 Appendix

35 General specifications

36 Trademarks and Licenses

36 Maintenance

36 – Handling the Unit

Getting Started

6

Getting Started

1

Unique Features

BLUETOOTH®

Listens to music stored on your Bluetooth device.

Music Flow Bluetooth

Music Flow Bluetooth is an app designed to let you

take control of some of LG’s latest audio devices.

(Page 22)

LG Sound Sync

Controls volume level of this unit by the remote

control of your LG TV that is compatible with LG

Sound Sync. (Page 32)

Getting Started

7

Getting Started

1

Playable file

Requirement

Music file requirement

MP3/WMA le compatibility with this unit is limited

as follows.

y Sampling frequency : within 32 to 48 kHz (MP3),

within 32 to 48 kHz (WMA)

y Bit rate : within 32 to 320 kbps (MP3),

40 to 192 kbps (WMA)

y Maximum les : 2,000

y Maximum folders : 200

y File extensions : “.mp3”/ “.wma”

y Certain MP3/WMA les may not be played

depending on the type or format of the le.

Compatible USB Devices

y MP3 Player: Flash type MP3 player.

y USB Flash Drive:

Devices that support USB2.0 or USB1.1.

y The USB function of this unit does not support all

USB devices.

USB device requirement

y Devices which require additional program

installation when you have connected it to a

computer, are not supported.

y Do not extract the USB device while in operation.

y For a large capacity USB, it may take longer than a

few minute to be searched.

y To prevent data loss, back up all data.

y If you use a USB extension cable or USB hub, the

USB device is not recognized.

y Using NTFS le system is not supported. (Only FAT

(16/ 32) le system is supported.)

y This unit recognizes up to 2,000 les.

y External HDD, Card readers, Locked devices, or

hard type USB devices are not supported.

y USB port of the unit cannot be connected to PC.

The unit cannot be used as a storage device.

y Some USB may not work with this unit.

Getting Started

8

Getting Started

1

Remote control

Replacement of battery

Remove the battery cover on the rear of the remote

control, and insert the battery with 4 and 5

matched correctly.

• • • • • • • • • • • • • • a • • • • • • • • • • • • •

1 (Standby) : Turns the power on or off.

F (Function) : Selects the function and input source.

Input source / Function Display

USB USB

AUX input AUX

Bluetooth BT

LG Sound Sync (Wireless) LG TV

Radio FM

VOL (Volume) +/- : Adjusts speaker volume.

INFO SLEEP RDS/SET

CLOCK ALARM PTY

(Mute): Mutes the sound.

SOUND EFFECT : Chooses sound impressions.

PRESET·FOLDER W/S :

- Chooses a preset number for a radio station.

(Page 24)

- Searches for a folder of MP3/WMA les. When a

USB containing MP3/WMA les in several folders

is being played, press PRESET·FOLDER W/S to

select the folder you want to play.

Getting Started

9

Getting Started

1

• • • • • • • • • • • • • • b • • • • • • • • • • • • •

TUNING-/+ : Selects the radio stations.

C/V (Skip/Search) :

- Skips backward or forward.

- Searches for a section within a le.

N (Play/Pause) :

- Starts or pauses playback.

- Selects Stereo/Mono (Horizon mode only).

REPEAT : Listens to your les repeatedly or

randomly.

INFO :

- Sees information about your music. An MP3 le

often come with ID3 tag. The tag gives the Title,

Artist, Album or Time information.

- Sees Bluetooth device name of the unit in BT

READY.

- Sees the name of connected all Bluetooth device

in Bluetooth mode.

- In status of WIRELESS PARTY LINK connection,

device name of SLAVE unit appears in the

MASTER unit and device name of MASTER unit

appears in the SLAVE unit.

JUKEBOX/MEMORY :

- Selects JUKE BOX mode. (Page 26)

- Makes JUKE BOX list.

- Stores radio stations. (Page 24)

- Deletes all the saved stations.

LIGHTING : Selects the lighting effects.

VOCAL EFFECTS : Selects various vocal effects

mode.

DELETE :

- Deletes MP3/WMA les. (Page 18)

- Deletes a song on the JUKE BOX list.

Getting Started

10

Getting Started

1

Top panel

a USB Port

You can play sound les by connecting the USB

device.

b 1 (Standby)

Turns the power on or off.

KEY CHANGER

Changes the key to suit your vocal range.

VOICE CANCELLER

You can enjoy this function while playing music by

reducing the singer’s vocal in music from various

source.

ECHO/DEMO

- Selects ECHO mode.

- In power off status, if you press ECHO/DEMO,

shows DEMO mode.

c LIGHTING

Selects the lighting effects.

d MIC (Microphone) VOL. (Volume)

Select to adjust microphone volume.

(Adjust microphone volume by rotating

MASTER VOLUME / MULTI JOG.)

e VOCAL EFFECTS

Selects VOCAL EFFECTS mode.

f BASS BLAST

Press to select BASS effect directly.

g MASTER VOLUME / MULTI JOG

- Adjust speaker volume.

- Adjust microphone volume.

- Selects lighting mode.

- Selects vocal effects mode.

h F (Function)

Selects the function and input source.

Input source / Function Display

USB USB

AUX input AUX

Bluetooth BT

LG Sound Sync (Wireless) LG TV

Radio FM

U (Skip/Search)

- Skips forward.

- Searches for a section within a le.

- Selects the radio stations.

T (Play/Pause)

- Starts or pauses playback.

- Selects Stereo/Mono (Horizon mode only).

Y (Skip/Search)

- Skips backward.

- Searches for a section within a le.

- Selects the radio stations.

WIRELESS LINK

- Selects MASTER or SLAVE on WIRELESS

PARTY LINK mode.

- Enable or disable WIRELESS PARTY LINK mode.

i Display window

a

b

c d e f

h

i

g

Getting Started

11

Getting Started

1

a MIC (Microphone) jack

b Remote sensor

AC IN

ANTENNA

FM

AUX IN

L

R

c Handle

d AC IN socket

e ANTENNA (FM)

f AUX IN (L/R)

Connect an auxiliary device.

Front panel / Rear panel

a

d

f

e

c

b

Getting Started

12

Getting Started

1

How to place the unit

Automatically optimize the sound

It helps automatically optimize the sound to suit the

installation conditions (Horizontal or Vertical).

If the installation method is changed

(‘Horizontal Vertical’ or ‘Vertical Horizontal’),

it is indicated by ‘VERTICAL MODE’ or ‘HORIZON

MODE’ in the display panel.

On the horizon mode, you can hear the stereo

sound and on the vertical mode, the sound

transforms into a mono signal.

,

Note

y Do not sit on the unit or push the unit.

Otherwise it may result in malfunction and

causing personal injury and/ or property

damage.

y Do not place the unit on an unstable position

and place the unit at a safe distance from the

child’s reach.

y Be careful that the unit should not fall down.

Otherwise it may result in malfunction and

causing personal injury and/ or property

damage.

y Watch out the foot when you lay the unit in

horizontally.

>

Caution

Vertical

Horizon

RightLeft

2 Connecting

Connecting

13

Connecting

2

AC Power Cord

Connection

1. Connect one end of the AC power cord (included)

to the AC IN socket.

AUX IN

L

R

ANTENNA

FM

2. Plug the other end into the wall outlet.

Unplug the AC power cord from the wall outlet

if you do not to use for an extended period of

time.

,

Note

Connecting

14

Connecting

2

Optional Equipment

Connection

AUX IN Connection

Connect an output of auxiliary device (Camcorder, TV,

Player, etc) to the AUX IN (L/R) connector.

ANTENNA

FM

DVD, Blu-ray player etc.

Audio cable

White

Red

Listening to music from your external

device

The unit can be used to play the music from many

types of external device.

1. Connect the external device to the AUX IN

connector of the unit.

2. Turn the power on by pressing 1.

3. Press F to select AUX function.

4. Turn on the external device and start it playing.

USB Connection

Connect a USB device (or MP3 player, etc.) to the

USB port on the unit.

USB device

Removing the USB device from the unit :

1. Choose a different function.

2. Remove the USB device from the unit.

,

Note

Connecting

15

Connecting

2

Antenna Connection

Connect the supplied FM antenna for listening to

the radio.

Connect the FM wire antenna to the FM antenna

connector.

AC IN

ANTENNA

FM

AUX IN

L

R

FM antenna

Be sure to fully extend the FM wire antenna.

,

Note

3 Operating

Connecting

16

Connecting

2

Basic Operations

USB Operations

1. Connect the USB device to the USB port.

2. Select USB function by pressing F.

To Do this

Playback

Press N on the remote control or

T on the unit.

Pause

Press N on the remote control or

T on the unit during playback.

Searching

for a section

within a le

Press and hold C/V on the

remote control or Y/U on the

unit during playback and release it at

the point you want to listen to.

Skipping to

the next/

previous le

Press V on the remote control

or U on the unit to go to the

next le.

Playing less than 2 seconds, press

C on the remote control or Y

on the unit to go to the previous le.

Playing after 3 seconds, press C

on the remote control or Y on

the unit to go to the beginning of

the le.

Playing

repeatedly or

randomly

Press REPEAT on the remote

control repeatedly.

y The display changes in the following order.

USB

*RPT 1

RPT**DIR

RPT ALL

RANDOM

OFF

*RPT : Repeat

**DIR : Directory

y When you play JUKE BOX list, only RPT 1 and

RPT ALL are available.

y Even after restarting the unit or switching

one function to another, you can listen to

music from the point where it’s last been

played.

,

Note

Operating

17

Operating

3

Selecting a folder and

an MP3/WMA file

1. Press PRESET·FOLDER W/S repeatedly

on the

remote control

until a desired folder appears.

2. Press

N

to play it. The first file of folder will be

played.

y USB Folders/Files are recognized as below.

y If there is no le in a folder, the folder will not

appear.

y Folders will be presented as the following

order;

ROOT

FOLDER 1 FOLDER 3

FOLDER 7 FOLDER 8 FOLDER 5

FOLDER 6

y File will be played from $ le No.1 to $ le

No.14 one by one.

y Files and folders will be presented in order

recorded and may be presented differently

according to the record circumstances.

y *ROOT : The rst screen you can see when a

computer recognize the USB is “ROOT”.

,

Note

Operating

18

Operating

3

Deleting a file/folder or format

You can delete le, folder on your USB or format the

USB.

1. Select USB function by pressing F.

2. - Deletes le : Select the le you want to delete

and select “DEL FILE” by pressing DELETE on

the remote control.

- Deletes folder : Select the folder you want to

delete and select “DEL DIR” by pressing DELETE

on the remote control.

- Formats USB : Select “FORMAT” by pressing

DELETE on the remote control to format the

USB device.

3. To delete file/folder or format, press and hold

DELETE on the remote control.

y Do not extract the USB device during

operation. (play, delete, etc.)

y Regular back up is recommended to prevent

data loss.

y The delete function may not be supported

according to the USB status. (lock, etc.)

>

Caution

Operating

19

Operating

3

Using BLUETOOTH®

wireless technology

About Bluetooth

Bluetooth is wireless communication technology for

short range connection.

The sound may be interrupted when the connection

interfered by the other electronic wave or you

connect the Bluetooth in the other rooms.

Connecting individual devices under Bluetooth

wireless technology does not incur any charges.

A mobile phone with Bluetooth wireless technology

can be operated via the Cascade if the connection

was made via Bluetooth wireless technology.

y Available Devices : Smart phone, MP3, Notebook,

etc.

y Version : 4.0

y Codec : SBC

Bluetooth Profiles

In order to use Bluetooth wireless technology,

devices must be able to interpret certain proles.

This unit is compatible with following prole.

A2DP (Advanced Audio Distribution Prole)

Listening to music stored on the

Bluetooth devices

Pairing your unit and Bluetooth device

Before you start the pairing procedure, make

sure the Bluetooth feature is activated on your

Bluetooth device. Refer to your Bluetooth device’s

user guide. Once a pairing operation is performed, it

does not need to be performed again.

1. Turn on the unit.

When Bluetooth connection lock is activated,

you can search Bluetooth device in BT function.

,

Note

2. Operate the Bluetooth device and perform the

pairing operation. When searching for this unit

with the Bluetooth device, a list of the devices

found may appear in the Bluetooth device

display depending on the type of Bluetooth

device. Your unit appears as “LG FJ5 (XX)”.

y XX means the last two digits of

Bluetooth address. For example, if your

unit has a Bluetooth address such as

9C:02:98:4A:F7:08, you will see “LG FJ5 (08)”

on your Bluetooth device.

y Depending on the Bluetooth device type,

some devices may have a different pairing

process. Enter the PIN code (0000) as

needed.

y You can connect this unit with up to 3

Bluetooth devices simultaneously using the

same method as described above, only in the

Bluetooth function.

y The multi pairing connection is only

supported on Android devices. (Multi pairing

connection may not be supported depending

on the connected device specications.)

y Removable/detachable Bluetooth devices

(Ex: Dongle etc.) will not support multi

pairing.

,

Note

Operating

20

Operating

3

3. When this unit is successfully connected with

your Bluetooth device, “PAIRED” appears on the

display window and change to Bluetooth device

name soon. Then “BT” will appear on the display

window.

y "PAIRED" will momentarily appear on the

display when you connect other devices for

multi pairing.

y If the device name is unavailable, “_” will be

displayed.

,

Note

4. Listen to music.

To play a music stored on your Bluetooth device,

refer to your Bluetooth device’s user guide.

y When using Bluetooth technology, you have

to make a connection between the unit and

the Bluetooth device as close as possible and

keep the distance.

However, it may not work well in certain

situations as described below :

- There is a obstacle between the unit and

the Bluetooth device.

- There is a device using same frequency

with Bluetooth technology such as a

medical equipment, a microwave or a

wireless LAN device.

y You should connect your Bluetooth device to

this unit again when you restart it.

y Even if this unit connected up to 3 Bluetooth

devices in the Bluetooth mode, you can play

and control music by using only one of the

connected devices.

,

Note

Controls connected Bluetooth device

You can control connected Bluetooth device by the

unit; play, pause, stop, skip.

y Only Android OS and iOS is available to use

this function.

y This function may not be supported

depending on the Bluetooth device, or

operated differently.

,

Note

Bluetooth connection lock (BT LOCK)

You can limit Bluetooth connection to only

BT (Bluetooth) and LG TV function to prevent

unintended Bluetooth connection.

To turn on this function, press and hold N on

the remote control or T on the unit for about 5

seconds in BT (Bluetooth) function.

“BT LOCK” appears then you can limit Bluetooth

connection.

To turn off this function, press and hold N on

the remote control or T on the unit for about 5

seconds in BT (Bluetooth) function.

“BT UNLOCK” appears.

Page is loading ...

LG FJ5 Owner's manual

LG FJ5 Owner's manual

Related papers

Other documents