Hama R1094175
The Hama R1094175 is a USB 2.0 FlashPen with a rotating design. It is compatible with Windows 2000/ME/XP and Mac OS 9.X or higher. The FlashPen does not require any additional driver files for Windows ME/XP and 2000, as it is automatically detected and installed. Once installed, you will see an additional "removable disk" drive in My Computer.
To remove the FlashPen, click on the small green arrow symbol in the systray (on the bottom right next to the Windows clock). Choose "Remove or eject hardware" or "Remove hardware safely". Click on "Deactivate" or "Exit" and confirm with "OK". You will then see a message stating that you can remove the hardware safely. Click "OK" or "Exit" and you can then remove the Hama FlashPen.
Hama R1094175
The Hama R1094175 is a USB 2.0 FlashPen with a rotating design. It is compatible with Windows 2000/ME/XP and Mac OS 9.X or higher. The FlashPen does not require any additional driver files for Windows ME/XP and 2000, as it is automatically detected and installed. Once installed, you will see an additional "removable disk" drive in My Computer.
To remove the FlashPen, click on the small green arrow symbol in the systray (on the bottom right next to the Windows clock). Choose "Remove or eject hardware" or "Remove hardware safely". Click on "Deactivate" or "Exit" and confirm with "OK". You will then see a message stating that you can remove the hardware safely. Click "OK" or "Exit" and you can then remove the Hama FlashPen.
Hama R1094175
The Hama R1094175 is a USB 2.0 FlashPen with a rotating design. It is compatible with Windows 2000/ME/XP and Mac OS 9.X or higher. The FlashPen does not require any additional driver files for Windows ME/XP and 2000, as it is automatically detected and installed. Once installed, you will see an additional "removable disk" drive in My Computer.
To remove the FlashPen, click on the small green arrow symbol in the systray (on the bottom right next to the Windows clock). Choose "Remove or eject hardware" or "Remove hardware safely". Click on "Deactivate" or "Exit" and confirm with "OK". You will then see a message stating that you can remove the hardware safely. Click "OK" or "Exit" and you can then remove the Hama FlashPen.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI