Planar laser level
3D Laser
LLevel D1- G
https://manual-hub.com/
2 3
Product Information Operational Approach
https://manual-hub.com/
2 2
4
6
3
5
7
4 5
Self-leveling mode Manual Mode
Place the device
horizontally
Place the device
obliquely
3
54
76
https://manual-hub.com/
6 7
Item number
Laser colour
Laser diode
Laser hazard class
Laser max. output
Laser wave length
Accuracy
Laser module
Compensation range
Self-leveling time
Self-leveling method
Operating distance
Operating distance with detector
Operating temperature
Storage temperature
Operating time
Battery type
Ingress protection
Device diamension
Device weight
Technical Data Attentions
• The laser device is sealed and calibrated at the plant to the
accuracies specied.
• It’s recommended to carry out an accuracy check before its rst
use and periodic checks during future use especially for precise
layouts.
• When not in use please power OFF the device and place the
pendulum lock in its locked position.
• In Manual Mode, self- leveling is OFF. The accuracy of the beam is
not ensured to be level.
• Remove batteries if the device will not be used for several
months.
• Do not store the laser device in direct sunlight or expose it
to high temperatures. The housing and some internal parts
are made of plastics and may become deformed at high
temperatures.
• Exterior plastic parts may be cleaned with a damp cloth.
Although these parts are solvent resistant, never use solvents.
Use a soft, dry cloth to remove moisture from the device before
storage.
• Store the device in its package when not in use. If storing for
extended time, remove batteries before storage to prevent
possible damage.
LLevel D1 - G
Green
Osran 30mW
Class 2
≤ 1mW
510 - 530 nm
± 3 mm / 15 m
Triple
4° ± 1°
≤ 4s
Mangetic damping
30 m
50 m
—10 °C - 50 °C
—20 °C - 70 °C
6 hours
Li-ion battery 3.7V 5200 mA max
IP 54
118.8 x 134.4 x 87.5 mm
520 gram
https://manual-hub.com/
8 9
Safety Instructions
Symbols used
The following symbols are used to distinguish precautions by the
degree of injury or damage that may happen if the precautions
ignored.
WARNING
Indicate a potentially hazardous situation or an unintended use
which, if not avoided, will result in death or serious injury.
CAUTION
Indicate a potentially hazardous situation or an unintended use
which, if not avoided, will result in death or serious injury and/or
in appreciable environment or property damages.
Important instructions which must be adhered to in practice
as they enable the product to be used in a technically correct and
ecient manner.
Possible danger when use the device:
- The laser beam will harm eyes when aim to eyes directly.
- The device may produce a spark and light to dust or gas.
- When clean battery electrolyte, human ngers may be aected.
- The device may cause a hazardous radiation explosion.
- Laser exposure radiation damage.
Caution:
- Do not look straight into the laser beam.
- Do not use the device in inammable and explosive environment.
- Remove the batteries to avoid the electrolyte leakage when not
use the device.
- Do not try other functions that the device does not have itself.
- Do not attempt to alter the functions of the device in any way.
Maintenance:
Wipe o dirt with wet and soft cloth. If wet cloth does not work,
use cloth with alcohol to clean the dirt. Be careful with the optical
components ( such as optical lens ) : wipe with clean soft cloth or
cotton swab with distilled water(as cleaning glasses or camera
lens). Do not use harmful cleaning material.
Permitted use
Horizontal measurement, vertical measurement and oblique
measurement
Prohibited use
• Using the instrument without reading instructions.
• Using beyond the stated usage limits.
• Damaging safety precaution system and removal of instruction
and hazard labels.
• Disassembling the equipment by using tools (screw drivers, etc.),
as far as not specically permitted for certain cases.
• Carrying out modication or alteration to the product.
• Using accessories from other manufacturers without the
approval by our company.
• Deliberate or irresponsible operation on scaffolding or when
using ladders, when measuring near running machines or
https://manual-hub.com/
10 11
unprotected equipment.
• Aiming directly at the sun.
• Deliberately aim at other people’s eyes, also in the dark.
• Using at the surveying site without adequate safeguards (e. g.
when measuring on roads, construction sites, etc.)
Limits of use
See section "Technical Data".
The product is designed for use in the conditions permanently
habitable for humans, do not use the product in corrosive or
explosive environments.
Areas of responsibility
Original producer’s responsibility:
Responsible for providing with safe products include manual and
original parts.
Responsibilities of the manufacturer of non-original accessories:
The manufacturers of non-original accessories for the products are
responsible for developing, implementing and communicating
safety concepts for their products. They are also responsible for
the eectiveness of these safety concepts in combination with the
products equipment.
Responsibilities of the person in charge of the instrument:
WARNING
The person responsible for the instrument must ensure to use and
request other people to use the equipment following instructions.
The person in charge of the instrument has the following duties:
• To understand the safety instructions on the product and the
instructions in the User Manual.
• To be familiar with local safety regulations related to accident
prevention.
• To inform local dealer immediately if the equipment becomes
unsafe.
Hazards in use
CAUTION:
Watch out for erroneous measurements if the instrument is
defective or if it has been dropped or has been misused or
modied.
Carry out periodic test measurements. Particularly after the
instrument has been subject to abnormal use, before, during and
after important measurements. Make sure the optical glasses
are kept clean and that there is no mechanical damage to the
instrument.
Precautions:
Only use this product as a measuring device, not as a control
device. Your system must be congured and operated in such a
way, that in case of an erroneous measurement, malfunction of
the device or power failure, it still can take safety measures (e. g.
safety limit switch), so it is assured that no damage will occur.
WARNING
Used batteries must not be disposed of with household waste.
Please dispose of or recycle the used batteries according to related
national or local regulations.
Do not dispose of or recycle this product with household
waste. Please recycle this product in a proper way. Dispose
https://manual-hub.com/
12 13
of or recycle this product according to related national or local
regulations. Always prevent access to the product by unauthorized
personnel. And take them to the collection points provided in
accordance with national or local regulations.
For technical support, please contact your local dealers.
Electromagnetic Compatibility (EMC)
The term "electromagnetic compatibility" means the capability
of the product to function smoothly in an environment where
electromagnetic radiation and electrostatic discharges are
present, and without causing electromagnetic interference to
other equipment.
WARNING
The product conforms to relevant standards and regulations. Yet,
the possibility of it causing interference with other devices cannot
be totally excluded.
CAUTION:
Never attempt to repair the product by yourself. In case of
damage, contact the local dealer.
It produces a visible laser beam which comes from the front of the
instrument.
It is a Class 2 laser product in accordance with,
• IEC60825-1 : 2014 "Radiation safety of laser products" Laser Class
2 products.
Do not stare into the laser beam or direct it towards other people
unnecessarily. Eyes will evade or blink by instinct for protection.
WARNING
Looking directly into the laser beam with optical glasses (e. g.
Binoculars, telescopes) can be hazardous.
Precautions:
Do not look directly into the beam with optical glasses.
CAUTION:
Looking into the laser beam may be hazardous to the eyes.
Precautions:
Do not look into the laser beam. Make sure the laser is aimed
above or below eye level, particularly when x the instrument on
machines, etc.
Planar laser level
https://manual-hub.com/
14 15
Warranty
We are confident of the quality of our products and offer
outstanding guarantee for professional users of the products.
This statement is in addition to and in no way prejudices your
contractual rights as a professional user or your statutory rights
as a private non-professional user. We warrant our laser level(s)
against faults in materials and/or workmanship for one year from
date of purchase provided that:
• Proof of purchase is produced.
• Service/repairs have not been attempted by unauthorized
persons.
• The product has been subject to fair wear and tear.
• The product has not been misused.
Defective products will be repaired or replaced, free of charge or
at our discretion, if sent together with proof of purchase to our
authorized distributor(s).
This Warranty does not cover faults caused by accidental damage,
unfair wear and tear, and use other than in accordance with the
manufacturers' instructions or repair or alteration of this product
not authorized by us. Users disassemble or damage the device
intentionally that we will provide a pay-needed maintenance
service.
Repair or replacement under this Warranty does not affect the
expiry date of the Warranty.
To the extent permitted by law, we shall not be liable under this
Warranty for indirect or consequential loss resulting from faults
in this product. This Warranty may not be varied without our
authorization. Calibration and care are not covered by Warranty.
NOTE:
The customer is responsible for the correct use and care of the
device. Moreover, the customer is completely responsible for
periodically checking the accuracy of the laser, and therefore for
the calibration of the device.
Thanks for purchase our products.
Carefully read the Safety Instructions and the User
Manual before using this product.
The person responsible for the instrument must ensure that
all users read, understand and adhere to these instructions.
https://manual-hub.com/
www.demass.com
https://manual-hub.com/
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
