2. SCE
  3. SCE-20XEL2108LP

SCE SCE-20XEL2108LP Installation Information

  • Hello! I've reviewed the datasheet for LS Electric flange mounted disconnects, including models FHU-L, FHX-S, FHX-L, COM-0, COM-2, COM-3, and COM-5. The document details the device's operating mechanisms, cutout details (D1 and D7), and available adapter kits. I am ready to answer any questions you have.
  • What is the standard cutout for these devices?
    What does the letter 'U' at the end of a part number indicate?
    Are there adapter kits available?
LS Electric Flange Mounted Disconnects and Circuit Breakers
1
ls-electric-flange-mounted-disconnects
Flange Mounted Operator Handle and Operating Mechanisms, variable depth and cable operated. The D1
Cutout detail is the standard cutout in all Stock SCE enclosures.
*The exception is part numbers with the Letter U at the end (Example: SCE-84XM4018U), this indicates the
Universal Cutout (D7).
Adapter Kits available for use with Universal Cutout, and for D1 cutout: SCE-UAV.
HANDLE /
OPERATOR
CUTOUT
DETAIL
FHU-L
D1
FHX-S
D1
FHX-L
D1
COM-0
D1
COM-2
D1
COM-3
D1
COM-5
D1
D1
D7
/