LasTec Articulator
Model 325EFT98
Parts Manual
Manual Part Number: Man-325EFT98
LasTec
A Division of Wood-Mizer Products, Inc.
7865 N County Rd 100E
Lizton, Indiana 46149
Phone (317) 892-4444 Fax (317) 892-4188
www.lastec.com
Table of Contents Page
Table of Contents 325EFT98/masterdoc031401 iii
SECTION 1: MOUNTING HARDWARE & DRIVE SYSTEM 1-1
1.1 Mounting Hardware......................................................................................1-2
1.2 Gearbox Assembly....................................................................................... 1-3
1.3 Drive Belt Idler Assembly............................................................................. 1-4
SECTION 2: MOWER DECKS 2-1
2.1 Deck Pivots and Trap Door Assemblies.......................................................2-2
2.2 Deck EFT1 & EFT3 Spindle Housing Assemblies........................................2-3
2.3 Deck EFT2 Spindle Housing Assembly........................................................2-4
2.4 Deck Belts & Covers .................................................................................... 2-5
2.5 Deck EFT1 Idler Pulley Assembly................................................................2-6
2.6 Deck EFT3 Idler Pulley Assembly................................................................2-7
2.7 Grass Chute & Mulching Plate Assemblies..................................................2-8
2.8 Deck Lift Chain Assemblies.......................................................................... 2-9
2.9 Decks & Decals..........................................................................................2-10
SECTION 3: WHEELS 3-1
3.1 Deck EFT1 Rocker Leg Assembly ............................................................... 3-2
3.2 Deck EFT3 Rocker Leg Assembly ............................................................... 3-4
3.3 Front Axle Assembly ....................................................................................3-6
3.4 Rear Axle Assembly (12300500 - Present)..................................................3-8
3.5 Left & Right Swivel Wheel Yoke Assemblies .............................................3-10
3.6 9”x 3.5” Wheel Assemblies, Pneumatic & Foam-Filled.............................3-12
3.7 9” x 3.5” Wheel Assemblies, Pneumatic & Foam-Filled.............................3-14
Go to www.lastec.com for latest changes in this manual.
Go to www.lastec.com for latest changes in this manual.
Mounting Hardware & Drive System
Mounting Hardware & Drive System 325EFT98/masterdoc031401 1-1
1
SECTION 1: MOUNTING HARDWARE & DRIVE SYSTEM
Go to www.lastec.com for latest changes in this manual.
Mounting Harware and Drive System
Mounting Hardware
1
1-2 325EFT98/masterdoc021005 Mounting Hardware and Drive System
0.1 Mounting Hardware
Ref. No. Part No. Parts Description
1019668 Deck Lift Tube Weldment
2F05004-123 Bolt, 3/8-16 x 3 1/2”
3F05010-10 Nut, Nylock, 3/8-16
4019869 Push Arm Weldment
5W704 Ball Swivel Weldment
6F05014-5 Bolt, 1”-8 x 3 3/4”
7F05010-109 Nut, Nylock, 1”-8
8P107 Grease Zerk, 1/4-28, Straight
9F05007-138 Bolt, 7/16-14 x 1 1/2”
10 F05010-143 Nut, Hex, 7/16-14
11 019870 Slide Tube Plate
12 F05005-118 Screw, 1/4-20x1 FHS
13 019827 Pad, 1-1/2 x 5-1/2 x 1/2 Delrin
14 F05010-69 Nut, 1/4-20 Nylock
Not Shown P762 PTO Shaft, 26 1/4”
P762-CE PTO Shaft, 26 1/4”, CE Certified
F05012-17 PTO Collar Roll Pin, 3/16” x 1 1/2”
6
1
3
2
EFT001
5
11
5
7
4
10
9
9
8
10
1213
14
Go to www.lastec.com for latest changes in this manual.
Mounting Hardware & Drive System
Gearbox Assembly
Mounting Hardware & Drive System 325EFT98/masterdoc031401 1-3
1
FIG. 1-2
1.2 Gearbox Assembly
Ref. No. Part No. Part Description
1P745 Gearbox, CM215AR351
2019762 PTO Guard
3019858 Belt, Insta-Power 85450
4019772 Pulley, Drive, 2BK70H
5019773 1
1 The 019773 Split Taper Bushing includes the F05009-68 Bolts.
Bushing, Split Taper, 7/8-H
6P806 Key, Woodruff, 3/16” x 3/4”, #9
7F05009-68 1Bolt, 1/4-20 x 3/4”, BO
8F05007-87 Bolt, 3/8-16 x 1”
9F05011-4 Washer, Split Lock, 3/8”
NOT SHOWN
P762 PTO Shaft, 26 1/4”
P762-CE PTO Shaft, 26 1/4”, CE Certified
F05012-17 PTO Collar Roll Pin, 3/16” x 1 1/2”
4
6
7
1
2
3
EFT002
5
8
8
9
9
Go to www.lastec.com for latest changes in this manual.
Mounting Hardware & Drive System
Drive Belt Idler Assembly
1
1-4 325EFT98/masterdoc031401 Mounting Hardware & Drive System
FIG. 1-3
1.3 Drive Belt Idler Assembly
Ref. No. Part No. Part Description
1019686 Idler Arm Weldment
2P408 Idler Pulley
3F05008-74 Bolt, 1/2-13 x 2 1/2”
4F05011-2 Washer, Flat, 1/2” SAE
5F05010-8 Nut, Nylock, 1/2-13
6F05008-78 Bolt, 1/2-13 x 4”
7P829 Bushing, Bronze, 1/2” ID
8F05010-127 Nut, Half Nylock, 1/2-13
9P410 Spring, Extension, 1” x 7”
4
8
5
5
6
9
1
2
3
EFT003
7
7
Go to www.lastec.com for latest changes in this manual.
Mower Decks
Mower Decks 325EFT98/masterdoc031401 2-1
2
SECTION 2: MOWER DECKS
Go to www.lastec.com for latest changes in this manual.
Mower Decks
Deck Pivots and Trap Door Assemblies
2
2-2 Lastec//060817 Mower Decks
2.1 Deck Pivots and Trap Door Assemblies
REF DESCRIPTION PART # QTY
1Wldmt, Pin, Deck Hinge 018900 2
2Bushing, 3/4ID x 1OD x 1Lng Oil 029842 2
3Bolt, 3/8-16x3/4 Hh Gr5 W/nylon Patch1F05007-168 2
Bolt, 3/8-16x3/4 HH Gr51F05007-118 2
4Washer, 3/8 Split Lock F05011-4 2
5Bolt, 1/2-13x2 1/4 Gr5 F05008-10 2
6Nut, 1/2-13 Half Nyloc F05010-127 2
7Plate, 325E E2 Trap Door 019271 1
8Plate, 325ef E1 Trap Door 029776 1
9Strip, 325E Trap Door Clamp 029874 1
10 Bolt, 1/4-20x3/4 HH Gr5 F05005-123 3
11 Washer, 1/4 Split Lock F05011-14 3
12 Washer, 1/4 SAE Flat F05011-60 2
Fitting, 1/4-28 Straight Grease1P107 2
Mower Decks
Deck EFT1 & EFT3 Spindle Housing Assemblies
Mower Decks 325EFT98/masterdoc031401 2-3
2
1 Lastec engineering has made an improvement to the deck pivot pin by adding a P107 grease zerk. Along with this change
the F05007-118 was directly replaced by the F05007-168. When ordering a 018900, please refer to assembly number
028631.
FIG. 2-2
2.2 Deck EFT1 & EFT3 Spindle Housing Assemblies
Ref. No. Part No. Part Description
1018458 Spindle Housing Weldment
2P103 Bearing, Spindle, Top, 6305 RS
3P104 Bearing, Spindle, Bottom, 6206 TGS
4P105 O-Ring, 2 1/2” x 2 3/4”
5T156 Pulley, Double Groove
6F05011-46 Washer, Split Lock, 7/8”
7F05011-73 Washer, Flat, 7/8” SAE
8F05010-139 Nut, Hex, 7/8-14
9P108 Grease Zerk, 1/8” NPT, Straight
10 F05008-37 Bolt, 1/2-13 x 1 1/4”
11 F05011-9 Washer, Split Lock, 1/2”
12 018480 Spindle Weldment, EFT1/EFT3
13 P407 Key, 3/16” SQ x 5/8”
14 P701 Blade, 25”, High-Lift
15 F05008-95 Bolt, 5/8-18 x 1 1/4”
16 F05011-27 Washer, Flat, 5/8”
4
12
4
9
5
10 11
6
7
8
1
13
15
14
2
3
ES002B
16
17
18 18
Go to www.lastec.com for latest changes in this manual.
Mower Decks
Deck EFT2 Spindle Housing Assembly
2
2-4 325EFT98/masterdoc031401 Mower Decks
17 028350 Washer, Nylon Blade
18 F05005-147 Screw, 1/4-20x1/2 Serrated Cup Pt Set BO
FIG. 2-3
2.3 Deck EFT2 Spindle Housing Assembly
Ref. No. Part No. Part Description
1018458 Spindle Housing Weldment
2P103 Bearing, Spindle, Top, 6305 RS
3P104 Bearing, Spindle, Bottom, 6206 TGS
4P105 O-Ring, 2 1/2” x 2 3/4”
5T160 Pulley, Quad
6F05011-46 Washer, Split Lock, 7/8”
7F05011-73 Washer, Flat, 7/8” SAE
8F05010-139 Nut, Hex, 7/8-14
9P108 Grease Zerk, 1/8” NPT, Straight
10 F05008-37 Bolt, 1/2-13 x 1 1/4”
11 F05011-9 Washer, Split Lock, 1/2”
12 018480 Spindle Weldment, EFT2
13 P407 Key, 3/16” SQ x 5/8”
14 P701 Blade, 25”, High-Lift
15 F05008-95 Bolt, 5/8-18 x 1 1/4”
16 028350 Washer, Nylon Blade
4
12
4
9
5
10
11
6
7
8
1
13
15
14
2
3
ES003B
16
17
18 18
Go to www.lastec.com for latest changes in this manual.
Mower Decks
Deck Belts & Covers
Mower Decks 325EFT98/masterdoc031401 2-5
2
17 F05011-40 Washer, Flat, 5/8”
18 F05005-147 Screw, 1/4-20x1/2 Serrated Cup Pt Set BO
FIG. 2-4
2.4 Deck Belts & Covers
Ref. No. Part No. Part Description
1 019312 Belt Cover, Deck EFT1
2F05010-10 Nut, Nylock, 3/8-16
3F05011-44 Washer, Fender, 3/8”
4F05010-24 Nut, Wing, 3/8-16
5019313 Belt Cover, Deck EFT3
6019600 Belt Cover, Deck EFT3 Transition
7019599 Belt Cover, Deck EFT1 Transition
8 019721 Belt Cover, Deck EFT2
9F05009-75 Screw, Wing, 1/4-20 x 1/2”
4
4
9
5
6
7
8
1
3
3
3
EFT004
3
2
11 10
2
Go to www.lastec.com for latest changes in this manual.
Mower Decks
Deck EFT1 Idler Pulley Assembly
2
2-6 325EFT98/masterdoc031401 Mower Decks
10 P707 Belt, Insta-Power, 85870
11 P706 Belt, Insta-Power, 85890
FIG. 2-5
2.5 Deck EFT1 Idler Pulley Assembly
Ref. No. Part No. Part Description
1W631 Idler Arm Weldment, Low
2P403 Bushing, Bronze, 3/4” ID x 5/8”
3F05010-122 Nut, Half Nylock, 3/4-10
4P609 Idler Pulley, V-Groove
5P608 Idler Pulley, Flat
6F05008-10 Bolt, 1/2-13 x 2 1/4”
7F05011-2 Washer, Flat, 1/2” SAE
8F05010-8 Nut, Nylock, 1/2-13
9P123 Grease Zerk, 1/4-28, 90°
4
9
5
10
6
6
7
7
8
81
2
2
3
ES004
7
Go to www.lastec.com for latest changes in this manual.
Mower Decks
Deck EFT3 Idler Pulley Assembly
Mower Decks 325EFT98/masterdoc031401 2-7
2
10 P410 Spring, Extension, 1” x 7”
FIG. 2-6
2.6 Deck EFT3 Idler Pulley Assembly
Ref. No. Part No. Part Description
1W632 Idler Arm Weldment, High
2P403 Bushing, Bronze, 3/4” ID x 5/8”
3F05010-122 Nut, Half Nylock, 3/4-10
4P609 Idler Pulley, V-Groove
5P608 Idler Pulley, Flat
6F05008-10 Bolt, 1/2-13 x 2 1/4”
7F05011-2 Washer, Flat, 1/2” SAE
8F05010-8 Nut, Nylock, 1/2-13
9P123 Grease Zerk, 1/4-28, 90°
10 P410 Spring, Extension, 1” x 7”
4
9
5
10
6
6
7
8
8
1
2
2
3
ES005
7
7
7
Go to www.lastec.com for latest changes in this manual.
Mower Decks
Grass Chute & Mulching Plate Assemblies
2
2-8 325EFT98/masterdoc031401 Mower Decks
FIG. 2-7
2.7 Grass Chute & Mulching Plate Assemblies
Ref. No. Part No. Part Description
1M230 Grass Chute
2W633 Grass Chute Mount Weldment
3019241 Grass Chute Mount Plate, Bottom
4F05005-101 Bolt, 1/4-20 x 1”
5F05011-60 Washer, Flat, 1/4” SAE
6F05010-69 Nut, Nylock, 1/4-20
7P436 Bushing, Bronze, 3/8” ID x 1”
8P460 Spring, Torsion, 180°, LH
9F05012-1 Cotter Pin, 1/8” x 1”
10 W691 Mulching Plate Weldment
11 P05059 Hitch Pin, #216
12 P478 Decal, Warning, “Rotating Blades”
13 P477 Decal, Warning, “Thrown Objects”
12
13
6
8
744
10
12
35
11
9
Go to www.lastec.com for latest changes in this manual.
Mower Decks
Deck Lift Chain Assemblies
Mower Decks 325EFT98/masterdoc031401 2-9
2
FIG. 2-8
2.8 Deck Lift Chain Assemblies
Deck: Deck EFT1, Front Deck EFT3, Front Deck EFT3, Rear
Part DescriptionRef. No. Part No. Part No. Part No.
1
019861 Chain, 1/4” x 22”
019862 Chain, 1/4” x 20”
019863 Chain, 1/4” x 16”
2
019864 Chain Sleeve, 20”
019865 Chain Sleeve, 18”
019867 Chain Sleeve, 14”
3F05007-138 F05007-138 Bolt, 7/16-14 x 1 1/2”
F05007-78 Bolt, 3/8-16 x 1 1/2”
4 Not Used Not Used F050011-61 Washer, Flat, 3/8” SAE
5F05010-135 F05010-135 Nut, Nylock, 7/16-14
F05010-10 Nut, Nylock, 3/8-16
3
3
4
4
5
5
1
2
EFT005
Go to www.lastec.com for latest changes in this manual.
Mower Decks
Decks & Decals
2
2-10 325EFT98/masterdoc031401 Mower Decks
FIG. 2-9
2.9 Decks & Decals
Ref. No. Part No. Part Description
1019622 Deck Weldment, EFT1
2019621 Deck Weldment, EFT2
3019623 Deck Weldment, EFT3
4P478 Decal, Warning, “Rotating Blades”
5P477 Decal, Warning, “Thrown Objects”
6P836 Decal, Warning “Guards”
7P837 Decal, Warning, “Operator Seat”
8018008 Decal, Die-Cut, “LasTec”
9018009 Decal, Die-Cut, “Articulator”
10 019546 Decal, Warning, “Thrown Objects” (w/Arrows)
11 018787 Decal, Warning, “Gearbox Oil” (EP 220)
12 019549 Decal, Warning, “Rotating Shaft”
13 019547 Decal, Equipment, Height Adj
14 019548 Decal, Equipment, Height Adj Instructions
1
2
3
EFT006A
ROTAT ING BLAD ES - Do No t P ut
Hands Or Feet Under Or Into M ower
When Engine Is Running
THROW N OB JECT S - Befo re M owi ng,
Clear Area Of People And Objects
Which May Be Thrown By Blade
DO NOT OPERATE MOWER
WITH OUT G RAS S CH UTE A ND AL L
GUARDS AND SHIELDS IN PLACE
4
4
4
468
7
9
5
10
Tall
Short
Tal l
Short
019549
018787
14
13
13
11
12
Go to www.lastec.com for latest changes in this manual.
Wheels
Wheels 325EFT98/masterdoc031401 3-1
3
SECTION 3: WHEELS
Go to www.lastec.com for latest changes in this manual.
Wheels
Deck EFT1 Rocker Leg Assembly
3
3-2 325EFT98/masterdoc031401 Wheels
3.1 Deck EFT1 Rocker Leg Assembly
Ref. No. Part No. Part Description
1019993 1
1 Machines before Serial Number 4031298 did not include the footstep with the Deck EFT1 rocker weldment.
Rocker Weldment, Deck EFT1 (Serial Numbers 3080798 - Present)
019626 Rocker Weldment, Deck EFT1 (Serial Numbers 1640298 - 3070698)
2019701 Deck Lock Rod Weldment
3019650-1 Spacer, 1/2”, Knurled
4019650 Spacer, 1/2”, Smooth
5019960 2
2 Originally 019833 Plastic Star Knob, has been replaced with the 019960 Steel Knob. The 019833 is no longer available.
Knob, Steel, 1/2-20
6F05010-16 Nut, Half Nylock, 1/2-20
7019348 Rod End, Female, 1/2-20
8F05008-102 Bolt, 1/2-13 x 2”
9F05010-122 Nut, Half Nylock, 3/4-10
10 019687 Pivot Weldment, Deck EFT1
11 018477 Pin Weldment
12 F05011-14 Washer, Split Lock, 1/4”
13 F05005-123 Bolt, 1/4-20 x 3/4”
14 P109 Bushing, Bronze, 1” ID
15 019646 Deck Locking Block
16 F05011-4 Washer, Split Lock, 3/8”
17 F05007-123 Bolt, 3/8-16 x 1 1/4”
18 019760 Rocker Limit Weldment, Deck EFT1
19 NOT USED 3
3 Machines as of Serial Number 3260898 no longer utilize bushings in this location.
Bushing, Bronze, 1/2” ID
20 019659 Rocker Link Arm
21 F05012-71 Clevis Pin, 5/16” x 2 1/8”
22 F05012-63 Hitch Pin, #216
23 029959 4
4 Assembly includes bearings, seals, and races. 029959 directly replaces P295 9” Wheel Assembly used prior to 8/00.
Wheel Assembly, 9” x 3.5”, 3/4” TRB, Pneumatic
24 P296 Bearing Spacer, 3/4” ID x 1/2”
25 T125 Bearing Spacer, 3/4” ID x 3/8”
26 F05010-122 Nut, Half Nylock, 3/4-10
27 P107 Grease Zerk, 1/4-28, Straight
28 F05010-8 Nut, Nylock, 1/2-13
29 F05011-104 Washer, Fender, 3/8”
30 F05011-4 Washer, Split Lock, 3/8”
31 F05007-118 Bolt, 3/8-16 x 3/4”
Go to www.lastec.com for latest changes in this manual.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/
