Kmart 43107575 User manual

Type
User manual
STEP 1. On the floor, attach four
connectors (B) to four corners of a
wire grid panel (A) as shown.
STEP 2. Add three grid panels
(A) by sliding into slots as shown.
STEP 3.
STEP 4. Insert three grid panels (A)
into slots.
STEP 5. Add top panel with
Top panel with
connectors as shown
connectors as shown.
Add top panel with
connectors as shown.
STEP 6.
Two finished cubes should look like
this. Repeat steps 4 and 5 until all eight cubes
CHECK ALL CONNECTORS TIGHTEN
ONCE ASSEMBLY IS COMPLETED
are assembled.
Metal Cube Unit Assembly Instruction
PARTS LIST:
A. x 30PCS B. x 34PCS C. x 2PCS
User instructions for wall fixing:It is strongly recommended that this product is
permanently fixed to the wall.Please seek professional advice if you are in doubt of
what fixing device to use.Regularly check that the wall fixing are securely
maintained.Stability of tall items may be affected by thick pile carpet or uneven floors.
Do not place unanchored televisions on furniture.Caution: for your safety when
attaching the wall fixing , please note the following:Check any electrical wires or
plumbing inside the wall before drilling any holes (if you are unsure please seek
professional advice from a qualified tradesperson)
WARNING: DO NOT STAND, SIT OR LEAN ON THE PRODUCT.
DO NOT KNOCK OR DRAG THE PRODUCT.
DO NOT USE THE PRODUCT UNLESS ALL ARE FIRMLY
SECURED. USE ONLY ON A FLAT SURFACE.
FAILURE TO FOLLOW THESE WARNINGS COULD RESULT IN
SERIOUS INJURY.
MAXIMUM LOADING WEIGHT PER CUBE: 1KG
CARE INSTRUCTIONS: WIPE CLEAN WITH A DAMP CLOTH. DO
NOT USE ABRASIVE MATERIALS AND
SOLVENTS. CHECK AND TIGHTEN ALL PARTS REGULARLY.-
STORE IN A DRY PLACE. FOR INDOOR USE ONLY.
TO FIX
ONTO WALL
  • Page 1 1

Kmart 43107575 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI