2. Tuffy
  3. 141-07

Tuffy 141-07 Installation guide

  • Hello, I'm here to assist you with the installation of the Divider Kit 141. I've reviewed the installation instructions, which details the required hardware, tools, and steps for mounting the dividers. Feel free to ask me any questions regarding the installation process or the components involved.
  • What hardware is included in the package?
    What tools are needed for installation?
    How many screws are used for each divider?
Page 1 of 1 - 2/26/2007 – Rev011907
INSTALLATION INSTRUCTIONS
DIVIDER KITS #141 FOR PART #140
Please read and fill out the enclosed warranty registration card to activate your warranty.
HARDWARE PACKAGE
(16) 10-32 Nylock Nuts #22.3 (16) 10-32x1/2” Screws #22.1 (16) #10 Washers #22.2
TOOLS AND SUPPLIES NEEDED
• Phillips head screwdriver
• 3/8” Nut driver or 3/8” wrench
INSTALLATION
1. Mount the dividers #12 and #13 using 10-32x1/2” Screws #22.1, nuts #22.3, and washers #22.2. Use (4) screws for each divider.
Insert the screws from the outside. The illustration shows the standard mounting arrangement. A variety of other options are
possible.
Call (970) 564-1762 for Technical Support
/