2. Jet Performance
  3. 62153

Jet Performance 62153 Installation guide

  • Hello! I've reviewed the installation instructions for the JET Performance Products Throttle Body Spacer designed for the Jeep 3.8L. The document details the steps necessary to install the spacer, including removing the air intake, detaching the throttle body, mounting the spacer with a gasket, and reassembling the intake system. I'm ready to assist with any questions you may have about the installation.
  • What is the first step in the installation process?
    How many bolts need to be removed to detach the throttle body?
    What is placed between the throttle body and the spacer?
Throttle Body Spacer Installation
Instructions
Jeep 3.8L
Part #62153
1. Remove the air intake tube from the throttle body and air box.
2. Remove the 4 bolts that mount the throttle body to the intake.
3. Install the JET Power-Flo spacer placing the gasket between the
throttle body and the spacer with the supplied longer bolts and
washers.
4. Reinstall the Air Intake assembly.
JET Performance Products – 17491 Apex Circle – Huntington Beach, CA 92647
Phone 714-848-5515 Fax 714-847-6290
2
/