2. Lumens
  3. VS-LC102Bundle

Lumens VS-LC102Bundle Operating instructions

  • Hello! I've analyzed the firmware upgrade instruction for the Lumens VS-LC101 device. This document provides details about how to prepare tools and perform the firmware upgrade using a USB drive. It guides you through the upgrade process including steps like powering off the device, inserting the USB drive, seeing flashing LEDs during upgrade and using the reset button . I will help you with any questions regarding the firmware upgrade process.
  • What file format is required for the firmware upgrade?
    How does the device indicate that the firmware is being upgraded?
    What should be done after the firmware upgrade?
1
VS-LC101 Firmware Upgrade Instruction
1 Device and Tool Preparation
1.1 Please prepare following devices and tools before FW upgrade.
VS-LC101
USB flash drive
Monitor
2 Firmware Upgrade
2.1 Power off the VS-LC101
2.2 Put the FW file(rec_fw.img) into the USB flash drive.
Please put the “unzipped” file into USB flash drive.
Put the FW files in the Root directory, not subdirectory.
2.3 Plug in the USB flash driver to the USB port in the front of VS-LC101.
2.4 Power on the VS-LC101.
2.5 VS-LC101 will detect the file and start upgrade automatically.
2.6 The LED on the power button will flash when FW upgrading.
2.7 The running bar will display on the screen.
2
2.8 After the FW upgrade, the unit will reboot.
2.9 Please reset the VS-LC101 to ensure the process is finished.
2.10 Hold the reset button for 15-20 seconds and the unit will reboot.
Reset Button
/