KidKraft Austin Toy Box - White Assembly Instruction

  • Hello! I am an AI chatbot trained to assist you with the KidKraft Austin Toy Box - White Assembly Instruction. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
2
3
A. Cross Dowel Bolt
x 14 pcs
1 7/8 in / 48 mm
B. Cross Dowel Bolt
x 2 pcs
7/8 in / 22 mm
4
6
C. Cross Dowel Nut
x 14 pcs
D. Nylon Washer
x 2 pcs
E. Nylon Nut x 2 pcs
F. Wood Dowel
x 10 pcs
5
Please retain this information for future reference
To order replacement parts, please visit www.kidkraft.com
Austin Toy Box
Assembly Instructions
HARDWARE
Allen Wrench x 1 pc
Wrench x 1 pc
The following tools
(not included) are
required for assembly:
Phillips
®
Screwdriver
PARTS LIST
1
2
3
A
A
A
A
C
C
F
F
1
STEP 1
STEP 2
STEP 3
4
A
A
A
A
C
C
C
C
C
6
5
A
A
C
C
C
A
A
Helpful Hint: Check all predrilled
holes for excess sawdust and clean
out the holes with a flathead screwdriver
if necessary.
1
Customer Service
1-800-933-0771
www.kidkraft.com
IMPORTANT:
Lid support mechanism must be installed properly (Step 5)
or a head/neck entrapment may exist. Check to make sure
the Lid Support is properly installed by moving the lid back
and forth. When you let go of the lid it should stop, not fall
or slam shut.
C
D
D
C
Flathead Screwdriver
© 2011 KidKraft, LP
USE AND MAINTENANCE:
-Use on level surfaces only
-Please check assembly at regular intervals, and
frequently tighten hardware if necessary. If
maintenance is not carried out, the product could
cease to function properly.
WARNING:
IMPORTANT! DO NOT
TIGHTEN SCREWS OR
BOLTS UNTIL COMPLETELY
ASSEMBLED.
Item #14951A White, 14962 Gray
F
F
F
F
F
F
F
F
ADULT ASSEMBLY REQUIRED.
Product includes small parts with potentially hazardous
sharp points and sharp edges in the unassembled state.
Keep unassembled parts away from children.
C
C
A
A
Customer Service
1-800-933-0771
www.kidkraft.com
2
Austin Toy Box
Assembly Instructions
STEP 4 STEP 5
COMPLETE
Check periodically
to make sure the lid
is not falling shut.
If the lid is starting
to slowly fall shut,
adjust the braking tension
(set screw) with a 4mm hex
key until the lid will remain
open when you let go of it.
When you let go
of the lid it should
stop, not fall or
slam shut.
Before calling customer service, please
locate the batch code number
(example: 105906/65006/04) found on the
bottom or back of your product.
B
E
E
B
© 2011 KidKraft, LP
Item #14951A White, 14962 Gray
/