LG STUDIO LSHD3080ST Owner's manual

Brand: LG STUDIO

Model: LSHD3080ST

Type: Owner's manual

ENGLISH ESPAÑOL

OWNER'S MANUAL

HOOD

Read this owner’s manual thoroughly before operating the appliance

and keep it handy for reference at all times.

www.lg.com

LSHD3689BD LSHD3089BD

LSHD3680ST LSHD3080ST

MFL70282902_00

TABLE OF CONTENTS

3 IMPORTANT SAFETY

INSTRUCTIONS

6 PRODUCT OVERVIEW

6 Parts

6 Specifications

7 OPERATION

8 SMART FUNCTIONS

8 LG SmartThinQ Application

9 FCC Notice (For transmitter module contained in

this product)

9 FCC RF Radiation Exposure Statement

10 MAINTENANCE

10 Surface Maintenance

10 Aluminum Mesh Filters

10 Removing Mesh Filters

11 TROUBLESHOOTING

11 Before Calling for Service

13 WARRANTY

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

IMPORTANT SAFETY INSTRUCTIONS

Read and follow all instructions when using the range to prevent the risk of fire, electric

shock, personal injury, or damage. This guide does not cover all possible conditions that

may occur. Always contact your service agent or manufacturer about problems that you do

not understand.

Download this owner's manual at: http://www.lg.com

This is the safety alert symbol. This symbol alerts you to potential hazards that

can result in property damage and/or serious bodily harm or death.

All safety messages will follow the safety alert symbol and either the word

WARNING or CAUTION. These words mean:

WARNING

- Indicates a hazardous situation which, if not avoided, could result

in death or serious injury.

CAUTION

- Indicates a hazardous situation which, if not avoided, could result

in minor or moderate injury.

WARNING

•

To avoid the possibility of explosion or fire, do not store or use combustible, flammable

or explosive vapors and liquids (such as gasoline) inside or in the vicinity of this or

any other appliance. Also keep items that could explode, such as aerosol cans, away

from cooktop burners, ovens and range hoods. Do not store flammable or explosive

materials in adjacent cabinets or areas.

•

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS,

OBSERVE THE FOLLOWING:

– Use this unit only in the manner intended by the manufacturer. If you have questions,

contact the manufacturer.

– Before servicing or cleaning unit, switch power off at service panel and lock the

service panel door to prevent power from being switched on accidentally. When the

service panel door cannot be locked, securely fasten a prominent warning device,

such as a tag, to the service panel.

CAUTION

•

For general ventilating use only. DO NOT use to exhaust hazardous or explosive

materials and vapors.

STATE OF CALIFORNIA PROPOSITION 65 WARNINGS

WARNING

•

This product contains chemicals known to the State of California to cause cancer and

birth defects or other reproductive harm. Wash hands after handling. (US only)

IMPORTANT SAFETY INSTRUCTIONS

GENERAL SAFETY PRECAUTIONS

To reduce the risk of fire, electric shock, serious injury or death when using the range hood,

follow basic safety precautions, including the following:

WARNING

•

If you receive a damaged product, immediately contact your dealer or builder. Do not

install or use a damaged hood.

•

Make sure that the range hood has been properly installed and grounded by a qualified

installer according to the accompanying installation instructions. Have the installer

show you the location of the fuse or junction box so that you know where and how to

turn the power off.

•

Do not install, repair or replace any part of the range hood unless specifically

recommended in the literature accompanying it. A qualified service technician should

perform all other service.

•

To avoid the risk of electric shock, before servicing the range hood, switch power off at

the fuse or junction box and lock the electrical panel door to prevent power from being

switched on accidentally. When the electrical panel cannot be locked, securely fasten a

prominent warning device, such as a tag, to the service panel.

•

To avoid the risk of electric shock, before cleaning the range hood, turn off the main

power switch.

•

Use the range hood only for its intended purpose as outlined in this manual. DO NOT

use this range hood to vent hazardous or explosive materials or vapors. If you have

questions, contact the manufacturer.

•

Do not tamper with the controls.

•

Never allow the filters to become blocked or clogged. Do not allow foreign objects,

such as cigarettes or napkins, to be sucked into the hood.

•

If the cooktop and range hood are near a window, use an appropriate window

treatment. Avoid long drapes or other window coverings that could blow over the

cooktop and hood, resulting in a fire hazard.

•

Always run the fan(s) whenever the cooktop is operating.

•

Do not leave children alone or unattended in the area where the cooktop and range

hood are in use. Never allow children to sit or stand on an appliance. Do not let

children play with a range, cooktop or range hood. Do not store items of interest to

children above or around the cooktop, range or range hood.

•

The minimum vertical distance between the cooktop surface and the exterior part of

the hood must be no less than 26" (66 cm). The required vertical distance may be

longer for the range or cooktop being used. Consult the range or cooktop installation

instructions for the minimum vertical distance from the appliance being used.

•

To reduce the risk of a range-top grease fire:

– Never leave surface units unattended at high settings. Boil-overs cause smoking and

greasy spill-overs that may ignite. Heat oils slowly on low or medium settings.

– Always turn hood ON when cooking at high heat or when flambéing food (i.e. Crepes

Suzette, Cherries Jubilee, Peppercorn Beef Flambé).

– Clean ventilating fans frequently. Grease should not be allowed to accumulate on

fan or filter.

– Use proper pan size. Always use cookware appropriate for the size of the surface

element.

IMPORTANT SAFETY INSTRUCTIONS

ENGLISH

WARNING

•

TO REDUCE THE RISK OF INJURY TO PERSONS IN THE EVENT OF A RANGE-

TOP GREASE FIRE:

– SMOTHER FLAMES with a close-fitting lid, cookie sheet or metal tray, then turn

off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go out

immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.

– NEVER PICK UP A FLAMING PAN - you may be burned.

– DO NOT USE WATER, including wet dish cloths or towels - a violent steam explosion

may result.

– Use a fire extinguisher ONLY if:

• You have a Class ABC extinguisher, and you already know how to operate it.

• The fire is small and contained in the area where it started.

• The fire department is being called.

• You can fight the fire with your back to an exit.

READ AND SAVE THESE INSTRUCTIONS

PRODUCT OVERVIEW

Parts

4 5

HOOD

ICON TOUCH CONTROL PANEL

LED STRIP LIGHT

MESH FILTER

SIDE PANEL (Only for LSHD3689BD, LSHD3680ST)

Specifications

Hood Models LSHD3689BD, LSHD3680ST, LSHD3089BD, LSHD3080ST

Hood Width

LSHD3689BD, LSHD3680ST : 36 Inches

LSHD3089BD, LSHD3080ST : 30 Inches

Filters 2 pcs

Lights 1(LED Strip type)

OPERATION

ENGLISH

OPERATION

1 32

POWER / DELAY OFF BUTTON

Power Button Function

•

Button will turn power on and off for

entire hood (fan and lights).

•

Hood will remember the last speed and light

level it was turned off at.

(Example: Press the

button to turn off

the hood with fan speed at level 4 and lights

on high. Press the

again and the hood

will turn on with the fan speed set to 4 and the

lights on high.)

Delay Off Button Function

•

With the fan on, press and hold the

button for three seconds. The fan will change

to speed 1 and the 5 minute delay off timer

will start.

+ LEDs will illuminate

and slowly blink in accordance with the time

remaining until the fan and lights automatically

turn off.

•

Pressing the

button while the Delay

Off Function is enabled will turn the hood off

and cancel the Delay Off Function.

SPEED SELECTION BUTTON

Fan Speed Decrease Button

•

Press this button to decrease fan speed. 5, 4,

3, 2, 1.

•

If fan is On at level 1 and this button is

pressed, fan will power Off.

Fan Speed Increase Button

•

Press this button to increase fan speed. Fan

On, 1, 2, 3, 4, 5.

•

If hood is Off and this button is pressed, fan

will turn On at level 1.

LIGHT BUTTON

•

The light has two levels: High and Low.

•

From off, press one time for High. Press again

for Low. Press again to power lights off.

•

Press and hold the Light button for 3 seconds

to connect to a home Wi-Fi network. See

page 8 for more information.

DISPLAY INDICATORS

Mesh Filter Clean Reminder (always enabled)

•

After 30 hours of fan usage, the

button

indicator will begin to slowly blink indicating it

is time to clean the mesh filters.

•

To reset: With hood off: hold the

button

for three seconds. All LED indicators will blink

two times confirming the 30 hour timer has

been reset.

Charcoal Filter Replace Indicator

(disabled by default, must be enabled if

recirculating hood)

•

To enable Charcoal Filter Replacement

Reminder:

−

With hood off, hold

button and

button simultaneously for three seconds.

All LED indicators will illuminate for three

seconds confirming the Charcoal Filter

Replace Reminder is enabled.

•

To disable Charcoal Filter Replacement

Reminder:

−

With hood off, hold

button and

button simultaneously for three seconds.

All LED indicators will blink two times

confirming the Charcoal Filter Replace

Reminder is disabled.

•

After 120 hours of fan usage the

button

will slowly blink indicating the charcoal filters

need replacement.

•

To reset: With hood off, hold the

button

for three seconds. All LED indicators will blink

two times confirming the 120 hour timer has

been reset.

SMART FUNCTIONS

LG SmartThinQ Application

The LG SmartThinQ application allows you to

communicate with the appliance using a smartphone.

Before Using LG SmartThinQ

•

For appliances with the or logo

Use a smartphone to check the strength of

the wireless router (Wi-Fi network) near the

appliance.

•

If the distance between the appliance and the

wireless router is too far, the signal strength

becomes weak. It may take a long time to

Turn off the Mobile data or Cellular Data on

your smartphone.

Connect your smartphone to the wireless router.

NOTE

•

To verify the Wi-Fi connection, check that Wi-Fi

icon on the control panel is lit.

•

The appliance supports 2.4 GHz Wi-Fi networks

only. To check your network frequency, contact

your Internet service provider or refer to your

wireless router manual.

•

LG SmartThinQ is not responsible for any

network connection problems or any faults,

malfunctions, or errors caused by network

connection.

•

The surrounding wireless environment can

make the wireless network service run slowly.

•

If the appliance is having trouble connecting

to the Wi-Fi network, it may be too far from

the router. Purchase a Wi-Fi repeater (range

extender) to improve the Wi-Fi signal strength.

•

The network connection may not work properly

depending on the Internet service provider.

•

The Wi-Fi connection may not connect or may

be interrupted because of the home network

environment.

•

If the appliance cannot be registered due to

problems with the wireless signal transmission,

unplug the appliance and wait about a minute

before trying again.

•

If the firewall on your wireless router is enabled,

disable the firewall or add an exception to it.

•

The wireless network name (SSID) should be a

combination of English letters and numbers. (Do

not use special characters.)

•

Smartphone user interface (UI) may vary

depending on the mobile operating system (OS)

and the manufacturer.

•

If the security protocol of the router is set to

WEP, network setup may fail. Change the

security protocol (WPA2 is recommended), and

Installing the LG SmartThinQ

Application

Search for the LG SmartThinQ application from the

Google Play Store or Apple App Store on a smart

phone. Follow instructions to download and install the

application.

NOTE

•

If you choose the simple login to access the LG

SmartThinQ application, you must go through

the appliance registration process each time

you change your smartphone or reinstall the

application.

SMART FUNCTIONS

ENGLISH

LG SmartThinQ Application Features

•

For appliances with the or logo

Settings

Allows you to set various options on the hood and in

the application.

Monitoring

Use this function to check the current status from one

screen.

NOTE

•

If you change your wireless router, your

Internet service provider or your password after

registering the appliance, delete it from the LG

SmartThinQ Settings → Edit Product and

•

This information is current at the time of

publication. The application is subject to change

for product improvement purposes without

notice to users.

Open Source Software Notice

Information

To obtain the source code under GPL, LGPL, MPL,

and other open source licenses, that is contained in

this product, please visit http://opensource.lge.com.

In addition to the source code, all referred license

terms, warranty disclaimers and copyright notices are

available for download.

LG Electronics will also provide open source code

to you on CD-ROM for a charge covering the cost

of performing such distribution (such as the cost of

media, shipping, and handling) upon email request

to [email protected]. This offer is valid for a

period of three years after our last shipment of this

product. This offer is valid to anyone in receipt of this

information.

Wireless module (LCW-003) Specifications

Frequency Range 2412~2462 MHz

Output Power (max.)

IEEE 802.11 b : 17.56 dBm

IEEE 802.11 g : 25.53 dBm

IEEE 802.11 n : 25.29 dBm

FCC Notice (For transmitter

module contained in this

product)

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant

to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against

harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct

the interference by one or more of the following

measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment

and the receiver.

•

Connect the equipment to an outlet on a circuit

different from that to which the receiver is

connected.

•

Consult the dealer or an experienced radio/TV

technician for help.

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1) this device may not cause harmful interference

and

2) this device must accept any interference received,

including interference that may cause undesired

operation of the device.

Any changes or modifications in construction of this

device which are not expressly approved by the party

responsible for compliance could void the user’s

authority to operate the equipment.

FCC RF Radiation Exposure

Statement

This equipment complies with FCC radiation exposure

limits set forth for an uncontrolled environment. This

transmitter must not be co-located or operating in

conjunction with any other antenna or transmitter.

This equipment should be installed and operated with

minimum distance 20 cm (7.8 inches) between the

antenna and your body. Users must follow the specific

operating instructions for satisfying RF exposure

compliance.

MAINTENANCE

Surface Maintenance

Clean periodically with hot soapy water and a

clean cotton cloth. Do not use corrosive or abrasive

detergent, or steel wool/scouring pads which will

scratch and damage surface. Do not use products

containing chlorine bleach or citrus-based cleaners.

For heavier soil use liquid degreaser.

After cleaning, you may use non-abrasive stainless

steel polish or cleaners to polish and buff out the

stainless luster and grain. Using a clean microfiber or

cotton cloth, scrub lightly and with the grain.

Aluminum Mesh Filters

The aluminum mesh filters installed by the factory are

intended to filter out residue and grease from cooking.

They don't need to be replaced on a regular basis, as

long as they are kept clean.

Remove and clean by hand or in dishwasher on low

heat. Spray degreasing detergent and leave to soak if

heavily soiled.

Dry filters and re-install before using hood.

Removing Mesh Filters

Push handle on filter toward back of range hood.

Pivot the front of the filter down and pull the filter

forward to remove it.

•

Follow these steps in reverse to reassemble the

filter.

TROUBLESHOOTING

ENGLISH

TROUBLESHOOTING

Before Calling for Service

Symptoms Possible Causes / Solutions

After installation, the

unit doesn’t work.

•

The power source is not turned ON.

- Make sure the circuit breaker and the unit’s power is ON.

•

The power cord and the cable locking connector are not connected properly.

- Make sure the power cord is properly connected to the unit.

Lights work, but

blower is not turning.

•

The thermally protected system detects if the blower is too hot to operate and

shuts the blower down.

- The blower will function properly after the thermally protected system cools

down.

The unit is vibrating.

•

The blower is not securely in place.

- Tighten the screws holding the blower in place.

•

Damaged blower wheel.

- Call for service.

•

The hood is not secured in place.

- Check the installation of the hood.

The blower is working,

but the lights are not.

•

Call for service.

The speed levels of

the blower sound the

same.

•

Using the wrong size of ducting.

- Change the ducting to at least 8" round or 3-1/4" x 10" rectangular for single

blower or 10" round for dual blower.

The hood is not

venting out properly.

•

The hood might be hanging too far above the cook top.

- Adjust the distance between the cook top and the bottom of the hood to within

26" to 36".

•

The wind from the opened windows or opened doors in the surrounding area are

affecting the ventilation of the hood.

- Close all windows and doors to eliminate the outside wind flow.

•

Blockage in the duct opening or duct work.

- Clear any blockages from the duct work or duct opening.

•

The direction of duct opening is against the wind.

- Adjust the duct opening direction.

•

Using the wrong size of ducting.

- Change the ducting to correct size.

Mesh filter is

vibrating.

•

Mesh filter is loose.

- Change the metal filter.

The unit turns on by

itself.

•

A spot light or kitchen lamp is shining directly onto the switch controls.

- The switch controls are light sensitive. A light source aimed directly at the

switch controls may disrupt switch functions.

TROUBLESHOOTING

Symptoms Possible Causes / Solutions

Trouble connecting

appliance and

smartphone to Wi-Fi

network

•

The password for the Wi-Fi network was entered incorrectly.

- Delete your home Wi-Fi network in the application and begin the registration

process again.

•

Mobile data for your smartphone is turned on.

- Turn off the Mobile data on your smartphone before registering the appliance.

•

The wireless network name (SSID) is set incorrectly.

- The wireless network name (SSID) should be a combination of English letters

and numbers. (Do not use special characters.)

•

The router frequency is not 2.4 GHz.

- Only a 2.4 GHz router frequency is supported. Set the wireless router to 2.4

GHz and connect the appliance to the wireless router. To check the router

frequency, check with your Internet service provider or the router manufacturer.

•

The distance between the appliance and the router is too far.

- If the appliance is too far from the router, the signal may be weak and the

connection may not be configured correctly. Move the router closer to the

appliance or purchase and install a Wi-Fi repeater.

WARRANTY

ENGLISH

WARRANTY (USA)

Should your LG Electric Range fail due to a defect in materials or workmanship under normal home use, during

the warranty period set forth below, LG will at its option repair or replace the product. This limited warranty is

valid only to the original retail purchaser of the product and applies only when purchased and used within the

United States including U.S. Territories. Proof of original retail purchase is required to obtain warranty service

under this limited warranty.

Warranty Period Scope of Warranty HOW SERVICE IS HANDLED

Two (2) years from date of

original retail purchase

Parts and Labor

LG will provide parts and labor to repair or replace

defective parts.

•

Replacement products and parts are warranted for the remaining portion of the original warranty period or

ninety (90) days, whichever is greater.

•

Replacement products and parts may be new or remanufactured.

THIS WARRANTY IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING WITHOUT

LIMITATION, ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. TO

THE EXTENT ANY IMPLIED WARRANTY IS REQUIRED BY LAW, IT IS LIMITED IN DURATION TO THE

EXPRESS WARRANTY PERIOD ABOVE. NEITHER THE MANUFACTURER NOR ITS U.S. DISTRIBUTOR

SHALL BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, INDIRECT, SPECIAL, OR PUNITIVE

DAMAGES OF ANY NATURE, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR PROFITS, OR

ANY OTHER DAMAGE WHETHER BASED IN CONTRACT, TORT, OR OTHERWISE.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitations on how

long an implied warranty lasts, so the above exclusion or limitation may not apply to you. This warranty gives you

specific legal rights and you may also have other rights that vary from state to state.

THIS LIMITED WARRANTY DOES NOT COVER:

•

Service trips to deliver, pick up, or install or repair the product; instruction to the customer on operation of

the product; repair or replacement of fuses or correction of wiring or plumbing, or correction of unauthorized

repairs/installation.

•

Failure of the product to perform during power failures and interruptions or inadequate electrical service.

•

Damage caused by leaky or broken water pipes, frozen water pipes, restricted drain lines, inadequate or

interrupted water supply or inadequate supply of air.

•

Damage resulting from operating the Product in a corrosive atmosphere or contrary to the instructions outlined

in the Product’s owner’s manual.

•

Damage to the Product caused by accidents, pests and vermin, lightning, wind, fire, floods, or acts of God.

•

Damage or failure caused by unauthorized modification or alteration, or if it is used for other than the intended

purpose, or any water leakage where the unit was not properly installed.

•

Damage or failure caused by incorrect electrical current, voltage, or plumbing codes, commercial or industrial

use, or use of accessories, components, or consumable cleaning products that are not approved by LG.

•

Damage caused by transportation and handling, including scratches, dents, chips, and/or other damage to the

finish of your product, unless such damage results from defects in materials or workmanship and is reported

within one (1) week of delivery.

•

Damage or missing items to any display, open box, discounted, or refurbished Product.

•

Products with original serial numbers that have been removed, altered, or cannot be readily determined. Model

and Serial numbers, along with original retail sales receipt, are required for warranty validation.

•

Increases in utility costs and additional utility expenses.

•

Repairs when your Product is used in other than normal and usual household use (e.g. commercial use, in

offices and recreational facilities) or contrary to the instructions outlined in the Product’s owner’s manual.

•

Costs associated with removal of your Product from your home for repairs.

WARRANTY

•

The removal and reinstallation of the Product if it is installed in an inaccessible location or is not installed in

accordance with published installation instructions, including LG’s owner’s and installation manuals.

•

Damage resulting from misuse, abuse, improper installation, repair, or maintenance. Improper repair includes

use of parts not approved or specified by LG.

OBTAIN WARRANTY SERVICE AND ADDITIONAL INFORMATION

If you do not have access to the internet and you need assistance using your product or you would like to

schedule service, you may contact LG Electronics at the number below.

For assistance or service, call 1-800-243-0000.

If you need further assistance, you can write to LG with any questions or concerns at the address below:

LG Electronics, 201 James Record Road, Huntsville, Alabama 35813

For additional product information, visit our website at http://www.lg.com

ESPAÑOL

MANUAL DEL PROPIETARIO

CAMPANA

Lea detenidamente el manual del propietario antes de poner el aparato en

funcionamiento y consérvelo a mano en todo momento para su referencia.

www.lg.com

LSHD3689BD LSHD3089BD

LSHD3680ST LSHD3080ST

MFL70282902_00

ÍNDICE

3 INSTRUCCIONES IMPORTANTES DE

SEGURIDAD

6 DESCRIPCIÓN GENERAL DEL

PRODUCTO

6 Piezas

6 Especificaciones

7 FUNCIONAMIENTO

8 FUNCIONES INTELIGENTES

8 Aplicación LG SmartThinQ

9 Aviso de la FCC (para el módulo transmisor contenido

en este producto)

9 Declaración sobre exposición a la radiación de RF de

la FCC

10 MANTENIMIENTO

10 Mantenimiento de la superficie

10 Filtros de malla de aluminio

10 Extraer los filtros de malla

11 SOLUCIÓN DE PROBLEMAS

11 Antes de llamar al servicio técnico

13 GARANTÍA

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Español

INSTRUCCIONES IMPORTANTES DE

SEGURIDAD

Lea y siga todas las instrucciones cuando utilice la cocina para evitar riesgos de incendios, descargas

eléctricas, lesiones personales o daños. Esta guía no incluye todas las situaciones posibles que

podrían ocurrir. Siempre comuníquese con su agente de servicio técnico o con el fabricante cuando

haya problemas que no comprenda.

Descargue este manual en: http://www.lg.com

Este es el símbolo de alerta de seguridad. Este símbolo le advierte sobre posibles riesgos

que pueden ocasionar daños materiales, lesiones personales graves o la muerte.

El símbolo de alerta de seguridad siempre estará acompañado de las palabras

"ADVERTENCIA" o "PRECAUCIÓN". Estos términos significan lo siguiente:

ADVERTENCIA

- Indica una situación peligrosa que, de no evitarse, podría

causar lesiones graves o la muerte.

PRECAUCIÓN

- Indica una situación peligrosa que, de no evitarse, podría

causar lesiones leves o moderadas.

ADVERTENCIA

•

Para evitar que se produzcan explosiones o incendios, no almacene ni use líquidos o vapores

combustibles, inflamables o explosivos (como por ejemplo, gasolina) dentro o cerca de este o

cualquier otro artefacto. Además, mantenga cualquier artículo que pueda explotar, como, por

ejemplo, latas de aerosol, alejado de los quemadores de la cocina, del horno y de la campana

extractora. No almacene materiales explosivos o inflamables en áreas o alacenas cercanas.

•

PARA REDUCIR EL RIESGO DE INCENDIO, DESCARGAS ELÉCTRICAS O LESIONES

PERSONALES, TENGA EN CUENTA LO SIGUIENTE:

– Use esta unidad solamente del modo previsto por el fabricante. Si tiene alguna pregunta,

póngase en contacto con el fabricante.

– Antes de limpiar o realizarle mantenimiento a la unidad, apáguela desde el panel de servicio

y bloquee la puerta del panel de servicio para evitar que la unidad se encienda por accidente.

En caso de que la puerta del panel de servicio no se pueda bloquear, coloque un dispositivo

de advertencia bien visible y firmemente sujeto, como, por ejemplo, una etiqueta, en el panel

de servicio.

PRECAUCIÓN

•

Solo para uso de ventilación general. NO lo utilice para la extracción de materiales y vapores

peligrosos o explosivos.

ADVERTENCIAS DE LA PROPUESTA 65 DEL ESTADO DE

CALIFORNIA

ADVERTENCIA

•

Este producto contiene químicos conocidos por el estado de California por causar cáncer,

malformaciones de nacimiento u otros daños reproductivos. Lávese bien las manos después

de su manipulación.(Solo EEUU)

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

PRECAUCIONES GENERALES DE SEGURIDAD

Para reducir el riesgo de incendio, descargas eléctricas, lesiones graves o muerte al usar esta

campana extractora, siga las precauciones de seguridad básicas, incluidas las siguientes:

ADVERTENCIA

•

Si recibe un producto dañado, póngase en contacto inmediatamente con el distribuidor o el

constructor. No instale ni utilice una campana dañada.

•

Asegúrese de que un instalador calificado instale y conecte a tierra su campana extractora de

acuerdo con las instrucciones de instalación suministradas. Haga que el instalador le muestre

la ubicación de la caja de empalmes o fusibles para que usted sepa dónde y cómo apagar el

artefacto.

•

No instale, repare o reemplace ninguna pieza de la campana extractora, salvo que esto

se recomiende específicamente en la documentación suministrada. Toda otra tarea de

mantenimiento debe ser realizada por un técnico calificado.

•

Para evitar el riesgo de descargas eléctricas, antes de realizarle mantenimiento a la campana

extractora, apáguela desde la caja de empalmes o fusibles y bloquee la puerta del panel

eléctrico para evitar que la unidad se encienda por accidente. En caso de que el panel del panel

eléctrico no se pueda bloquear, coloque un dispositivo de advertencia bien visible y firmemente

sujeto, como, por ejemplo, una etiqueta, en el panel de servicio.

•

Para evitar el riesgo de descarga eléctrica, antes de limpiar la campana extractora, apague el

interruptor principal.

•

Use la campana extractora solo para el propósito previsto, tal como se describe en este manual.

NO utilice esta campana para la extracción de materiales y vapores peligrosos o explosivos. Si

tiene alguna pregunta, póngase en contacto con el fabricante.

•

No manipule indebidamente los controles.

•

Nunca permita que los filtros se bloqueen u obstruyan. No permita que objetos extraños, tales

como cigarrillos o servilletas, sean aspirados por la campana.

•

Si la cocina y la campana extractora se encuentran cerca de una ventana, asegúrese de que

la ventana cumpla con las condiciones adecuadas. Evite que la ventana tenga cortinas largas

u otras cubiertas que podrían volar sobre la superficie de cocción y la campana, ya que esto

puede significar un riesgo de incendio.

•

Siempre ponga en funcionamiento el/los ventilador(es) cuando esté utilizando la superficie de

cocción.

•

No deje niños solos o sin vigilancia en el área donde se estén utilizando la superficie de cocción

y la campana extractora. Nunca permita que los niños se sienten en un artefacto o se suban a

él. No permita que los niños jueguen con una cocina, una superficie de cocción o una campana

extractora. No almacene artículos de interés para los niños encima o alrededor de la superficie

de cocción, la cocina o la campana extractora.

•

La distancia vertical mínima entre la superficie de la cocina y la parte exterior de la campana no

debe ser menor de 26" (66 cm). La distancia vertical puede tener que ser mayor según la cocina

o la superficie de cocción que se esté utilizando. Consulte las instrucciones de instalación de

la cocina o la superficie de cocción para conocer la distancia mínima vertical desde el artefacto

que se utilice.

INSTRUCCIONES IMPORTANTES DE SEGURIDAD

Español

ADVERTENCIA

•

Para reducir el riesgo de incendio provocado por grasa en la superficie de la cocina:

– Nunca deje las hornallas sin supervisión en configuraciones de altas temperaturas. Los

derramamientos por ebullición producen humo y los derrames de grasa pueden arder.

Caliente las grasas y los aceites lentamente y en configuraciones de temperatura bajas o

medias.

– Siempre encienda la campana cuando cocine a altas temperaturas o cuando realice

flambeados (por ej., flambeado de carne a la pimienta, crepes Suzette, cerezas Jubilee).

– Limpie los ventiladores regularmente. No debe dejar que se acumule grasa en el ventilador o

el filtro.

– Use el tamaño adecuado de sartén. Siempre utilice utensilios de cocina de dimensiones

adecuadas para el tamaño de la hornalla.

•

PARA REDUCIR EL RIESGO DE LESIONES PERSONALES EN CASO DE UN INCENDIO

PROVOCADO POR GRASA EN LA SUPERFICIE DE LA COCINA:

– SOFOQUE LAS LLAMAS con una tapa que ajuste bien, una asadera o una bandeja de metal

y luego apague el quemador. SEA CUIDADOSO PARA EVITAR QUEMADURAS. Si las llamas

no se apagan inmediatamente, EVACUE Y LLAME A LOS BOMBEROS.

– NUNCA TOME UNA OLLA EN LLAMAS, puede quemarse.

– NO USE AGUA, lo que incluye paños de cocina o toallas húmedas: puede producirse una

violenta explosión de vapor.

– Use un extintor SOLAMENTE si:

• Tiene un extintor clase ABC y ya sabe cómo operarlo.

• El fuego es pequeño y se halla contenido en el área donde comenzó.

• Ya llamó a los bomberos.

• Puede intentar apagar el fuego manteniendo su espalda hacia una salida.

LEA Y GUARDE ESTAS INSTRUCCIONES

DESCRIPCIÓN GENERAL DEL PRODUCTO

Piezas

4 5

CAMPANA

PANEL DE CONTROL TÁCTIL CON ICONOS

LUZ LED

FILTROS DE MALLA

PANEL LATERAL (solo para LSHD3689BD, LSHD3680ST)

Especificaciones

Modelos de campana LSHD3689BD, LSHD3680ST, LSHD3089BD, LSHD3080ST

Ancho de la campana

LSHD3689BD, LSHD3680ST : 36 pulgadas

LSHD3089BD, LSHD3080ST : 30 pulgadas

Filtros 2 pzas.

Luces 1 (tipo tira LED)

Page is loading ...

LG STUDIO LSHD3080ST Owner's manual

Brand: LG STUDIO

Model: LSHD3080ST

Type: Owner's manual

Download PDF

report

in other languages

español: LG STUDIO LSHD3080ST El manual del propietario

LG STUDIO LSHD3080ST Owner's manual

LG STUDIO LSHD3080ST Owner's manual

in other languages

Related papers

Other documents