Optoma X600 User manual

English

1

Table of contents

Table of contents ....................................................................................1

Usage Notice ..........................................................................................3

Safety Information .........................................................................................3

Precautions....................................................................................................4

Eye Safety Warnings .....................................................................................6

Introduction.............................................................................................7

Package Overview.........................................................................................7

Product Overview ..........................................................................................8

Main Unit ................................................................................................................ 8

Connection Ports ................................................................................................... 9

Remote Control .................................................................................................... 10

Installation ............................................................................................11

Connecting the Projector .............................................................................11

Connect to Notebook ........................................................................................... 11

Connect to Video Sources ................................................................................... 12

Powering On/O the Projector .....................................................................13

Powering On the Projector ................................................................................... 13

Powering O the Projector ................................................................................... 14

Warning Indicator ................................................................................................. 14

Adjusting the Projected Image.....................................................................15

Adjusting the Projector’s Height ........................................................................... 15

Adjusting Projection Image Size (XGA) ............................................................... 16

Adjusting Projection Image Size (1080p) ............................................................. 17

User Controls .......................................................................................18

Remote Control ...........................................................................................18

On-screen Display Menus ...........................................................................20

How to operate ..................................................................................................... 20

Menu Tree ...................................................................................................21

Image ................................................................................................................... 23

Image | Advanced ................................................................................................ 25

Image | Advanced | Color Matching ..................................................................... 27

Image | Advanced | Signal ................................................................................... 28

Display ................................................................................................................. 29

Display | 3D .......................................................................................................... 31

Setup .................................................................................................................... 32

Setup | Language ................................................................................................. 34

Setup | Security .................................................................................................... 35

Setup | Audio Settings ......................................................................................... 38

Setup | Advanced ................................................................................................. 39

Setup | Network ................................................................................................... 40

Setup | LAN Settings ............................................................................................ 41

Setup | Control Settings ....................................................................................... 42

2

Table of contents

Options ................................................................................................................. 43

Options | Input Source ......................................................................................... 46

Options | Remote Settings ................................................................................... 47

Options | Advanced .............................................................................................. 48

Options | Lamp Setting ........................................................................................ 50

LAN_RJ45 ...................................................................................................52

Appendices...........................................................................................62

Troubleshooting ........................................................................................... 62

Image ................................................................................................................... 62

Other .................................................................................................................... 63

Projector LED Status Indicator ............................................................................. 64

Remote Control .................................................................................................... 65

Replacing the Lamp.....................................................................................66

Compatibility Modes ....................................................................................69

Video Compatibility .............................................................................................. 69

Video Timing Detail Describe ............................................................................... 69

Computer Compatibility - VESA standards .......................................................... 70

Input Signal for HDMI/DVI-D ............................................................................... 71

True 3D Video Compatibility table ....................................................................... 72

RS232 Commands and Protocol Function List............................................73

RS232 Pin Assignments (projector side) ............................................................. 73

RS232 Protocol Function List .............................................................................. 74

Telnet Commands .......................................................................................78

AMX Device Discovery commands .............................................................78

PJLink™ supported commands...................................................................79

Trademarks .................................................................................................81

Ceiling Mount Installation ............................................................................83

Optoma Global Oces ................................................................................84

Regulation & Safety Notices ........................................................................ 86

English

3

Usage Notice

Safety Information

The lightning ash with arrow head within an equilateral triangle is

intended to alert the user to the presence of uninsulated “dangerous

voltage” within the product’s enclosure that may be of sucient

magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert

the user to the presence of important operating and maintenance

(servicing) instructions in the literature accompanying the appliance.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. DANGEROUS HIGH

VOLTAGES ARE PRESENT INSIDE THE ENCLOSURE. DO NOT OPEN THE

CABINET. REFER SERVICING TO QUALIFIED PERSONNEL ONLY.

Class B emissions limits

This Class B digital apparatus meets all requirements of the Canadian

Interference-Causing Equipment Regulations

Important Safety Instruction

1. Do not block any ventilation openings. To ensure reliable operation of

the projector and to protect from over heating, it is recommended to

install the projector in a location that does not block ventilation. As an

example, do not place the projector on a crowded coee table, sofa,

bed, etc. Do not put the projector in an enclosure such as a book case

or a cabinet that restricts air ow.

2. Do not use the projector near water or moisture. To reduce the risk of

re and/or electric shock, do not expose the projector to rain or

moisture.

3. Do not install near heat sources such as radiators, heaters, stoves or

any other apparatus such as ampliers that emits heat.

4. Clean only with dry cloth.

5. Only use attachments/accessories specied by the manufacturer.

6. Do not use the unit if it has been physically damaged or abused.

Physical damage/abuse would be (but not limited to):

▀■ Unit has been dropped.

▀■ Power supply cord or plug has been damaged.

▀■ Liquid has been spilled on to the projector.

▀■ Projector has been exposed to rain or moisture.

▀■ Something has fallen in the projector or something is loose inside.

Do not attempt to service the unit yourself. Opening or removing covers

may expose you to dangerous voltages or other hazards. Please call

Optoma before you send the unit for repair.

7. Do not let objects or liquids enter the projector. They may touch danger-

ous voltage points and short out parts that could result in re or electric

shock.

8. See projector enclosure for safety related markings.

9. The unit should only be repaired by appropriate service personnel.

4

Usage Notice

Precautions

Please follow all warnings, precautions and

maintenance as recommended in this user’s

guide.

▀■ Warning-

Do not look into the projector's lens when the

lamp is on. The bright light may hurt your eyes.

▀■ Warning-

To reduce the risk of re or electric shock, do

not expose this projector to rain or moisture.

▀■ Warning-

Please do not open or disassemble the

projector as this may cause electric shock.

▀■ Warning-

When replacing the lamp, please allow the unit

to cool down. Follow instructions as described

on page 66.

▀■ Warning-

This projector will detect the life of the lamp

itself. Please be sure to change the lamp when it

shows warning messages.

▀■ Warning-

Reset the "Lamp Reset" function from the

on-screen display "System|Lamp Setting" menu

after replacing the lamp module

(refer to pages 50-51).

▀■ Warning-

When switching the projector o, please ensure

the cooling cycle has been completed before

disconnecting power. Allow 90 seconds for the

projector to cool down.

▀■ Warning-

Do not use lens cap when projector is in opera-

tion.

▀■ Warning-

When the lamp is approaching to the end of its

life time, the message "Replacement suggested"

will show on the screen.

Please contact your local reseller or service cen-

ter to change the lamp as soon as possible.

Note





















English

5

Usage Notice

Do:

▀■ 



▀■ 



▀■ 



Do not:

▀■ Block the slots and openings on the unit provided for

ventilation.

▀■ Use abrasive cleaners, waxes or solvents to clean the unit.

▀■ Use under the following conditions:

- In extremely hot, cold or humid environments.



Ensure that the ambient room temperature is

within 5 - 40°C



Relative Humidity is 10 - 85% (Max.), non-condensing

- In areas susceptible to excessive dust and dirt.

- Near any appliance generating a strong magnetic eld.

- In direct sunlight.

6

Usage Notice

Eye Safety Warnings

▀■ Avoid staring/facing directly into the projector beam at all

times. Keep your back to the beam as much as possible.

▀■ When projector is used in a classroom, adequately supervise

students when they are asked to point out something on the

screen.

▀■ In order to minimize the lamp power, use room blinds to

reduce ambient light levels.

English

7

Introduction

Package Overview

Unpack and inspect the box contents to ensure all parts

listed below are in the box. If something is missing,

please contact Optoma customer service.

Projector with lens cap Power Cord 1.8m 15 pin D-sub VGA Cable

Remote Control 2 x AAA Batteries Carrying Case

Documentation :



User's Manual



Warranty Card



Quick Start Guide



WEEE Card

Note











8

Introduction

Product Overview

Main Unit

1

2

3

9

8

7

6

4

11

5

10

1. Tilt-Adjustment Button

2. Tilt-Adjustment Feet

3. Lens Cap

4. LED Indicators

5. Power Button

6. Function Keys

7. Zoom

8. Focus

9. IR Receiver

10. Lens

11. Connection Ports

English

9

Introduction

Connection Ports

15

1 2 3 4 5 6 7 8 9

11

1213

14

1617

10

1820 19

1. Power Socket

2. SERVICE

3. VGA Output

4. VGA 1/ YPbPr Connector

5. VGA 2/ YPbPr Connector

6. DisplayPort

7. HDMI 1

8. HDMI 2

9. 3D SYNC OUT

10. 12V OUT

11. Kensington MicrosaverTM Lock Port

12. Speaker

13. IR Receiver

14. Composite Video

15. AUDIO IN (L and R)

16. S-Video

17. RS232

18. AUDIO IN

19. AUDIO OUT

20. LAN

10

Introduction

Note





CAUTION































Remote Control

1. Power On

2. Test Pattern

3. Function 1 (Assignable)

4. Display mode / Mouse

Left Key

5. Four Directional Select

Keys

6. Enter

7. Information Panel

8. Source

9. Volume +/-

10. Format (Aspect Ratio)

11. Zoom

12. VGA1/1 (Number Button

for password input)

13. VGA2/4

14. BNC/7

15. S-Video/2

16. Video/5

17. YPbPr/8

18. Power O

19. Mouse Switch

20. Function 2 (Assignable)

21. AV Mute / Mouse Right

Key

22. Laser

23. Re-Sync

24. V Keystone +/-

25. Menu

26. Remote code All

27. HDMI2

28. HDMI1/3

29. 3D/0

30. DVI/6

31. DisplayPort/9

32. Remote code 01~99

1

22

23

24

2

3

4

6

7

8

9

10

11

12

13

14

18

19

20

21

25

26

27

28

29

15

16

17

30

31

32

5

English

11

Connecting the Projector

Connect to Notebook

E62405SP

R

VGA, DVI, HDMI

6

1 3

5

2 4

Installation

1............................................................................................VGA Input Cable

2.................................................................Audio Cable (Optional Accessory)

3..........................................................DVI/HDMI Cable (Optional Accessory)

4.................................................................HDMI Cable (Optional Accessory)

5....................................................................................................Power Cord

6...............................................................RS232 Cable (Optional Accessory)

Note











12

Installation

Connect to Video Sources

Video Output

S−Video Output

DVD player, Set−top Box

HDTV receiver

DVD player, Set−top Box

HDTV receiver

E62405SP

R

4

1

2

5

3

1....................................SCART RGB/S-Video Adapter (Optional Accessory)

2.................................................................HDMI Cable (Optional Accessory)

3....................................................................................................Power Cord

4............................................................. S-Video Cable (Optional Accessory)

5.............................................. Composite Video Cable (Optional Accessory)

Note





Note











English

13

Installation

Powering On/O the Projector

Powering On the Projector

1. Remove the lens cover.

2. Connect the power cord to the projector.

3. Turn On the connected devices.

4. Ensure the Power LED is ashing and then press the power

button to turn On the projector.

The projector’s startup logo screen displays and connected

devices are detected. If the connected device is a laptop, press

the appropriate keys on the computer keyboard to switch the

display output to the projector. (Check the user manual of the

laptop to determine the appropriate Fn key combination to change

display output.)

See Security Settings on page 35 if security lock is enabled.

5. If more than one input device is connected, press the “Source”

button sequentially to switch between devices.

For direct source selection, see page 19.

Note







Note











Note





14

Installation

Warning Indicator

▀■ When the Lamp LED indicator lights red, the projector will

automatically shut itself down. Please contact your local

reseller or service center. See page 64.

▀■ When the Temp LED is on a steady (not ashing) red, the

projector will automatically shut itself down. Under normal

conditions, the projector can be switched on again after it

has cooled down. If the problem persists, you should contact

your local dealer or our service center. See page 64.

Powering O the Projector

1. Press the " " button on the remote control or " " button on

the panel of the projector to turn o the projector. First push of

button will display the following message on the screen.

Press the button again to conrm the shut down. If the button is not

pressed, the message will disappear in 5 seconds.

2. The Power LED ashes green (1 sec on, 1sec o) and the fans will

speed up during shut down cooling cycle. The projector reaches

stand-by mode as soon as the Power LED ashes green (2 sec on,

2 sec o).

If you wish to turn the projector back on, you must wait until the

projector has completed the cooling cycle and has entered standby

mode. Once in standby mode, simply press " " button on the

rear of the projector or " " on the remote control to restart the

projector.

3. Disconnect the power cord from the electrical outlet and the

projector only when the projector is in stand-by mode.

Note













English

15

Installation

Adjusting the Projected Image

Adjusting the Projector’s Height

The projector is equipped with elevator feet for adjusting

the image height.

To raise the image:

Lift the projector and press the height-adjuster button .

The height adjuster drops down .

To lower the image:

Press the height-adjuster button and gently push down the

projector.

1

2

3

Note

 The projector

table or stand

should be level

and sturdy.

 Position the

projector so that

it is perpendicular

to the screen.

 For personal

safety, please

secure the cables

properly.

16

Installation

Diagonal

length (inch) size

of 4:3 Screen

Screen Size W X H (4:3) Projection distance (D)

Oset (A)

(m) (feet) (m) (feet)

Width Height Width Height wide tele wide tele (m) (feet)

30” 0.61 0.46 2.00 1.50 1.10 1.28 3.60 4.20 0.06 0.19

40” 0.81 0.61 2.67 2.00 1.46 1.71 4.80 5.60 0.08 0.25

60” 1.22 0.91 4.00 3.00 2.19 2.56 7.20 8.40 0.11 0.37

80” 1.63 1.22 5.33 4.00 2.93 3.41 9.60 11.20 0.15 0.49

100” 2.03 1.52 6.66 5.00 3.66 4.27 12.00 14.00 0.19 0.62

120” 2.44 1.83 8.00 6.00 4.39 5.12 14.40 16.80 0.23 0.74

140” 2.84 2.13 9.33 7.00 5.12 5.97 16.80 19.59 0.26 0.86

160” 3.25 2.44 10.66 8.00 5.85 6.83 19.20 22.39 0.30 0.99

190” 3.86 2.90 12.66 9.50 6.95 8.11 22.79 26.59 0.36 1.17

230” 4.67 3.51 15.33 11.50 8.41 9.81 27.59 32.19 0.43 1.42

280” 5.69 4.27 18.66 14.00 10.24 11.95 33.59 39.19 0.53 1.73

300” 6.10 4.57 19.99 15.00 10.97 - 35.99 - 0.56 1.85

Adjusting Projection Image Size (XGA)

3URMHFWLRQ'LVWDQFH

.H\VWRQH&RUUHFWLRQ$QJOH

,PDJH+HLJKW

Note





English

17

Installation

Diagonal

length (inch) size

of 16:9 Screen

Screen Size W X H (16:9) Projection distance (D)

Oset (A)

(m) (feet) (m) (feet)

Width Height Width Height wide tele wide tele (m) (feet)

30” 0.66 0.37 2.18 1.23 - 1.28 - 4.18 0.06 0.18

40” 0.89 0.50 2.90 1.63 1.40 1.70 4.59 5.58 0.07 0.25

60” 1.33 0.75 4.36 2.45 2.10 2.55 6.88 8.36 0.11 0.37

80” 1.77 1.00 5.81 3.27 2.80 3.40 9.18 11.15 0.15 0.49

100” 2.21 1.25 7.26 4.08 3.50 4.25 11.47 13.94 0.19 0.61

120” 2.66 1.49 8.71 4.90 4.20 5.10 13.77 16.73 0.22 0.74

140” 3.10 1.74 10.17 5.72 4.9 5.95 16.06 19.52 0.26 0.86

160” 3.54 1.99 11.62 6.54 5.60 6.80 18.36 22.31 0.30 0.98

190” 4.21 2.37 13.80 7.76 6.65 8.08 21.80 26.49 0.35 1.16

230” 5.09 2.86 16.70 9.39 8.04 9.78 26.39 32.07 0.43 1.41

280” 6.20 3.49 20.33 11.44 9.79 11.90 32.12 39.04 0.52 1.72

300” 6.64 3.74 21.78 12.25 10.49 - 34.42 - 0.56 1.84

Adjusting Projection Image Size (1080p)

3URMHFWLRQ'LVWDQFH

.H\VWRQH&RUUHFWLRQ$QJOH

,PDJH+HLJKW

18

User Controls

Remote Control

Note

Due to the difference

in applications for each

country, some regions

may have different

accessories.

Using the Remote Control

Power On/O

Refer to the “Powering O the Projector” on page 14.

Refer to the “Powering On the Projector” on page 13.

Test Pattern Refer to the “Test Pattern” on page 44.

Mouse Switch

When connecting your PC to the projector through

USB, press “Mouse Switch” to activate/ inactivate the

mouse mode and control your PC using the remote.

Function 1

(F1)

Refer to the “Function 1” on page 47.

Function 2

(F2)

Refer to the “Function 2” on page 47.

Mode

( )

Mode - Refer to the “Display Mode” on page 23.

- In the mouse mode, use as emulation of

USB mouse left click via USB.

AV Mute

( )

AV Mute - Momentarily turns o/on the audio and

video.

- In the mouse mode, use as emulation of

USB mouse right click via USB.

Four

Directional

Select Keys

1. Use ▲▼◄► to select items or make adjustments

to your selection.

2. In the mouse mode, use ▲▼◄► as emulation of

directional keys.

Enter

1. Conrm your item selection.

2. In the mouse mode, as emulation keyboard enter

key.

Info. Refer to the “Information” on page 45.

Laser

Press to operate the on-screen pointer.

DO NOT POINT IN EYES.

Source Press “Source” to search for source.

Re-Sync

Automatically synchronize the projector to the input

source.

Menu

Press “Menu” to launch the on-screen display (OSD)

menu. To exit OSD, press “Menu” again.

English

19

User Controls

Using the Remote Control

Volume +/- Press “Volume +/-” to adjust volume.

V Keystone +/-

Adjusts image distortion caused by tilting the

projector. (±30 degrees)

Format Refer to the “Format” on page 29.

Zoom Press “Zoom” to zoom out images.

Remote ID

Press until Power LED is ashing then press 01~99

to set the particular remote code.

Remote All Press to set remote code to all.

VGA1

Press “VGA1” to choose source from VGA- IN

connector.

S-Video Press “S-Video” to choose S-Video source.

HDMI Press “HDMI” to choose HDMI source.

Re-sync

Automatically synchronizes the projector to the input

source.

VGA2

Press “VGA2” to choose source from VGA- IN

connector.

Video Press “Video” to choose Composite video source.

DVI Press “DVI” to choose source from DVI-D connector.

BNC Press “BNC” to choose BNC source.

YPbPr Press “YPbPr” to choose YPbPr source.

DisplayPort Press “DisplayPort” to choose DisplayPort source.

3D Press “3D” to turn on/o 3D menu.

Note











20

User Controls

On-screen Display Menus

The Projector has multilingual On-screen Display menus

that allow you to make image adjustments and change a

variety of settings. The projector will automatically detect

the source.

How to operate

1. To open the OSD menu, press “Menu” on the Remote Control or

Control Panel.

2. When OSD is displayed, use ◄► keys to select any item in the

main menu. While making a selection on a particular page, press

▲▼ or “ENTER” key on the Remote Control or “Enter” on the

Control Panel to enter sub menu.

3. Use ▲▼ keys to select the desired item and adjust the settings

by ◄► key.

4. Select the next item to be adjusted in the sub menu and adjust as

described above.

5. Press “ENTER” key on the Remote Control or “Enter” on the

Control Panel or “Menu” to conrm, and the screen will return to

the main menu.

6. To exit, press “Menu” again. The OSD menu will close and the

projector will automatically save the new settings.

Main Menu

Setting

Sub Menu

Page is loading ...

Optoma X600 User manual

Optoma X600 User manual

Related papers

Other documents