NOTICE: This high-quality shower door glass is tempered for safety, but it is glass and therefore, it can break. Treat it with care!

• Make sure corner protectors remain on glass during installation

• If the glass ever needs to be adjusted, make sure to put the corner protectors back on all glass panels before removing the glass, and make sure

to wear goggles and gloves

• Never allow the glass to make direct contact with hard surfaces such as ceramic tile, stone, metal or concrete

• Keep all hardware firmly tightened

• Make sure all bumpers are installed per instructions

• Avoid slamming the doors (be sure to tell the kids!)

• Never put excessive weight on the knobs or towel bars (again, tell the kids!)

limescale from building up, leaving beautiful, clear glass.

While Spot Guard will help staining and buildup, it’s important to take steps to keep your glass looking clean. The following tips will help ensure

your shower door glass stays clean and beautiful.

• After showering, use a good quality squeegee to remove water from the surface

• Wipe the door dry after showering with a clean, soft microfiber cloth, especially if you live in an area with hardwater or notice soap deposits

• Periodically clean your glass with a mild detergent or vinegar solution

• Do not use abrasive cleaners and never use bristly brushes or rough sponges

For regular cleaning use ONLY mild detergents or warm, soapy water. Use ONLY non-abrasive cloth or sponge. ALWAYS rinse surfaces after

cleaning. Before cleaning this product with cleaning products, test a small, inconspicuous area.

CAUTION: Manufacturer does not recommend the use of cleaning products that contain any of the following chemicals. Use of products contain-

soap scum & limescale.