Tortuga Outdoor LEX-RT3-T-CANCN Operating instructions

Brand
Tortuga Outdoor
Model
LEX-RT3-T-CANCN
Type
Operating instructions

This manual is also suitable for

SEA PINES ROCKING CHAIR
No assembly required. Just attach the runners to the chair*
Very Important!
Please Read Before
Installing Runners.
When attaching runners, only finger tighten each bolt several
turns before screwing down completely. Securing and
tightening one bolt at a time will create fitting issues and
potentially strip out the bolt hole on the opposite end.
Tortuga Outdoor – 495 Brown Ind. Pkwy. – Canton, GA – 30114 - Phone 678-880-6065
Hours M-F 8:30am-4:30pm EST - customers[email protected]
Runner Installation:
PLEASE READ
STEP 1: Make sure runner holes align on each leg of
both sides.
STEP 2: If holes do not align use a rubber mallet or
comparable tool to slightly move leg into position.
STEP 3: Make sure bolt is aligned straight, the
threaded hole is aluminum and could be stripped if
not aligned properly. Only finger tighten each bolt
several turns before screwing down completely.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Tortuga Outdoor LEX-RT3-T-CANCN Operating instructions

Brand
Tortuga Outdoor
Model
LEX-RT3-T-CANCN
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents