Moen 90DEGREESPABN Dimensions Guide

Brand: Moen

Model: 90DEGREESPABN

Category: Sanitary ware

Type: Dimensions Guide

Moen 90DEGREESPABN is a handheld shower with a 69" double interlock spiral hose, designed for ease of use and durability. The double check valve in the handle helps to prevent backflow, while the 30" slide bar with push button height selection allows for customization to your desired height. The single function handshower provides a consistent and refreshing shower experience, and the handshower holder rotates to adjust the angle of the spray.

CRITICAL DIMENSIONS

(DO NOT SCALE)

DESCRIPTION

• Various finishes identified by suffix

• Handheld shower

• 69" double interlock spiral hose (metal)

• Double check valve in handle

• 30" slide bar with push button height selection

OPERATION

• Single function

• Handshower holder rotates to adjust angle of handshower

FLOW

• EP17 suffix models designed to deliver 1.75 gpm (6.7 L/min) max

• EP suffix models designted to deliver 2.0 gpm (7/6 L/min) max at 80 psi

STANDARDS

• Designed and manufactured to meet: ASME A112.18.1/CSA B-125.1,

ASSE 1014 and all applicable specifications referenced therein

WARRANTY

• Limited lifetime warranty against material or manufacturing defects

90 DEGREE™

Single Function Handshower

w/Slide Bar

Model: S3879EP series

FINISHED

WALL LINE

Drop ell sold

separately

3-1/8”

(

80mm)

5/8”

(15mm)

8-3/4”

(223mm)

30-5/8”

(778mm)

Hole Size

5/8” (17mm)

2”

(50mm)

1-5/8”

(40mm)

2-1/8”

(54mm)

1 9 4 3 06 05 6 03 2 0B 6 8 7 A

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

Rev. 7/14

CRITICAL DIMENSIONS

(DO NOT SCALE)

TS2713sp: Rev. 5/13

THIN WALL APPLICATION

THICK WALL APPLICATION

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

2" CC (51mm)

1-7/8" IPS (48mm)

MAX WALL

HOT

INLET

COLD

INLET

FINISHED WALL LINE

FACE OF STUD

4-1/2" (114mm)

WALL OPENING

FLOOR

45" (1143mm)/

48" (1219mm)-SHOWER

32" (813mm)-TUB OR

TUB SHOWER

7-1/2"

(191mm)

MIN

TUB RIM

6'-6"

(1981mm)

1-3/8" (35mm)

2-1/2" MAX. (63mm)

1/2" MIN. CC (13mm)

5/8" MIN. IPS (16mm)

FLOOR LINE

1-3/8"

(35mm)

1-1/2"

(38mm)

3/16" (typ) (5mm)

PLASTER GROUND

3-1/2" (89mm) MAX.

2-1/4" (57mm) MIN.

DIAMETER

WALL

OPENING

PLASTIC

TUB/SHOWER

SURROUND

6-3/16”

(157mm)

2-1/2”

(64mm)

6-7/16”

(164mm)

2-7/16”

(62mm)

7-1/4”

(185mm)

8-3/8”

(213mm)

FAUCET DESCRIPTION

• Metal construction with various finishes identified by suffix

• Includes showerhead, arm, flange and diverter spout

OPERATION

• Lever style handle with temperature indicator on the escutcheon

• Handle operates counterclockwise through a 270˚ arc with off at

6 o’clock and maximum hot at the 9 o’clock position. Shut off in

clockwise direction

• Adjustable temperature limit stop to control maximum hot water

temperature

• Pressure balancing mechanism maintains selected discharge

temperature to ± 3.6° F (±2˚ C)

FLOW

• Showerhead is limited to 2.5 gpm (9.5 L/min) at 80 psi

• EP suffix models are limited to 1.75 gpm (6.6 L/min) at 80 psi

• NH suffix models contain no showerhead

CARTRIDGE

• 1222 cartridge design

• Nonmetallic/nonferrous and stainless steel materials

• Accommodates back to back installations

STANDARDS

• Third party certified to meet ASME A112.18.1/CSA B125.1 and all

applicable requirements referenced therein

• EP suffix models are third party certified to WaterSense®

• ADA for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish defects

to the original consumer purchaser

• 5 year warranty if used in commercial installations

90 DEGREE ™ POSI-TEMP

Single-Handle Tub/Shower Trim Kit

Model: TS2711 series - valve trim only

TS2712 series - shower trim only

TS2713 series - tub/shower trim only

Valves: 62300, 2500 series

1 9 4 3 06 05 6 03 2 0B 6 8 7 A

EP Suffix

Models Only

Specifications

DESCRIPTION

• Brass construction

• 1/2" CC, IPS, or PEX connections with 1/4 turn stops

• Pressure balancing, four port, cycle valve

OPERATION

• Adjustable temperature limit stop to control maximum hot

water temperature

• Pressure balancing mechanism maintain selected discharge

temperature to ± 3°F

CARTRIDGE

• 1222 cartridge design

• Nonmetallic/nonferrous and stainless steel materials

• Accommodates back to back installations

STANDARDS

• Third party certied to meet CSA B125.1, ASME A112.18.1,

ASSE 1016, and all applicable requirements referenced therein

• Moen’s Posi-Temp® and Moentrol® valves with graphite

composite spools combined with Moen’s Eco-performance

showerheads meet the performance requirements of

pressure and temperature variation of ASSE1016 when

tested as low as 1.5 gpm

WARRANTY

• Lifetime limited warranty against leaks, drips and nish defects

to the original consumer purchaser

• 5 year warranty if used in commercial installations

POSI-TEMP® VALVE

Pressure-Balancing Valve with

1/4 Turn Stops

Single Pack

Models: 2570 (CC), 2590 (IPS), 2580 (PEX)

Bulk Packed

Models: 62370 (CC), 62390 (IPS)

(Bulk packed 12 per carton)

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

CRITICAL DIMENSIONS

(DO NOT SCALE)

TUB

SHOWER

FLOOR

1/2" CC

SUPPLY

2-5/16" (59mm) C.C.

4-1/2" (114mm) PLASTER

GROUND SIZE AND

WALL OPENING

2" CC (51mm)

1 7/8" IPS (48mm)

MAX WALL

FINISHED WALL LINE

FACE OF STUD

32" (813mm) - TUB OR

TUB SHOWER

45" (1143mm)/

48" (1219mm) - SHOWER

2-7/8" MAX.

(73mm)

7/8" MIN. CC & IPS (22mm)

(25mm)

FLOOR LINE

(25mm)

2-1/8"

(54mm)

3/16" (typ) (5mm)

PLASTER GROUND

3-1/2" (89mm) MAX.

2-1/4" (57mm) MIN.

PLASTIC

TUB/SHOWER

SURROUND

DIAMETER

WALL

OPENING

Rev. 7/16

FINISHED WALL LINE

(102mm)

CRITICAL DIMENSIONS

(DO NOT SCALE)

1943060560320B687A

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

3-Function Transfer Valve Trim Kit

Models: TS4172 series

Valve: 3372

Rev. 12/11

DESCRIPTION

• Metal construction with various finishes identified by suffix

OPERATION

• Rotational control with 180˚ of rotation with stops

STANDARDS

• Third party certified to ASME A112.18.1/CSA B125.1 and all

applicable requirements referenced therein

• for lever handle

WARRANTY

• Lifetime limited warranty against leaks, drips and finish

defects to the original consumer purchaser

• 5 year warranty if used in commercial installations

ADA

CRITICAL DIMENSIONS

(DO NOT SCALE)

Spec i fi ca tions

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

DROP ELL

Models: A721 series

DESCRIPTION

• Metal construction with various finishes identified by suffix

WARRANTY

• Lifetime warranty against material or manufacturing defects

1.85”

(47mm)

3/8”

(10mm)

Finished

Wall Surface

Side ViewBack View

1/2-14 NPT

1/2-14

NPSM Thread

1" (25mm) Minimum

Diameter Hole

Pipe (Not Included)

2/12

CRITICAL DIMENSIONS

(DO NOT SCALE)

1943060560320B687A

FOR MORE INFORMATION CALL: 1-800-BUY-MOEN

www.moen.com

DESCRIPTION

• Two function transfer valve - 2 discrete outputs

OPERATION

• 180˚ rotational control

CARTRIDGE

• 162154 cartridge

STANDARDS

• Third party certified to ASME A112.18.1/CSA B125.1 and all

applicable requirements referenced therein

WARRANTY

• Lifetime limited warranty against leaks and drips to the original

consumer purchaser

• 5 year warranty if used in commercial installations

2-Function Transfer Valve

Model: 3375

FINISHED

WALL LINE

2" Max Wall

(51mm)

Floor

Plaster

Ground

3/16" "Typ"

(5mm)

2-3/8"

(60mm)

2-1/8"

(54mm)

WALL OPENING

Plaster

Ground

Plastic

Tub/Shower

Surround

Face of

Stud

1/2" MIN. CC (13mm)

2-1/2"

(63mm)

WALL OPENING

THIN WALL APPLICATION

THICK WALL APPLICATION

Rev. 2/12

Moen 90DEGREESPABN Dimensions Guide

Brand: Moen

Model: 90DEGREESPABN

Category: Sanitary ware

Type: Dimensions Guide

Download PDF

report

Moen 90DEGREESPABN Dimensions Guide

Moen 90DEGREESPABN Dimensions Guide

Related papers

Other documents