Acer H235H Quick start guide

Acer LCD Monitor Quick Start Guide (QSG)

Important safety instructions

Please read the following instructions carefully.

1 To clean the LCD monitor screen:

• Turn off the LCD monitor and unplug the power cord.

• Spray a non-solvent cleaning solution onto a rag and clean the screen gently.

2 Do not place the LCD monitor near a window. Exposing the monitor to rain, moisture or sunlight

can severely damage it.

3 Do not apply pressure to the LCD screen. Excessive pressure may cause permanent damage to the

display.

4 Do not remove the cover or attempt to service this unit yourself. An authorized technician should

perform servicing of any nature.

5 Store the LCD monitor in a room with a temperature of -20° to 60° C (-4° to140° F). Storing the LCD

monitor outside this range may result in permanent damage.

6 Immediately unplug your monitor and call an authorized technician if any of the following

circumstances occur:

• Monitor-to-PC signal cable is frayed or damaged.

• Liquid spills onto the LCD monitor or the monitor is exposed to rain.

• The LCD monitor or case is damaged.

Package contents

Attaching the monitor to the base

1 Remove the monitor base from the packaging and place it on a stable and level workspace.

2 Remove the monitor from the packaging.

3 Attach the the monitor stand arm to the base.

• Ensure that the base is locked onto the monitor stand arm. (for selected models)

• Secure the base to the monitor stand arm by turning the white screw using the integrated tab

or a suitable coin. (for selected models)

Connecting your monitor to a computer

1 Turn off your computer and unplug your computer's power

cord.

2 Connect the signal cable to the VGA and/or DVI-D and/or HDMI

input socket of the monitor, and the VGA and/or DVI-D

and/or HDMI output socket of the graphics card on the

computer. Then tighten the thumbscrews on the signal cable

connector.

3 Insert the monitor power cable into the power port at the

back of the monitor.

4 Plug the power cords of your computer and your monitor into

a nearby electrical outlet.

External controls

Icon Item Description

Power button/

indicator

Turns the monitor on/off. White indicates power on. Amber

indicates standby/power saving mode.

* for selected models

LCD

+!!

Audio cable

monitor Powercord

VGA cable DVI cable

User

Quick start

guide

s

guide

English

OSD functions Press to view the OSD. Press again to enter a selection in the OSD.

Auto adjust

button/Exit

Press the Empowering Key to open the Acer eColor Management

OSD and access the scenario modes.

If the OSD is active, press AAuto!to exit the OSD. Once the OSD is

inactive, press AAuto and the monitor will automatically optimize

the display position, focus, and clock of your display.

monitor

.

(a) VGA i

nput (b) DVI-D input (c) HDMI input

Use Input key to select between three different video source

that may be connected to your

Input

Empowering Key

Key

INPUT

Press to adjust volume.

Regulations and safety notices

FCC notices

This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part

15 of the FCC rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This device generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this device does cause harmful interference to radio or television reception, which can be

determined by turning the device off and on, the user is encouraged to try to correct the interference by

one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the device and receiver.

• Connect the device into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/television technician for help.

CE declaration of conformity

Hereby, Acer Inc., declares that this LCD monitor is in compliance with the essential requirements and

other relevant provisions of EMC Directive 2004/108/EC, Low Voltage Directive 2006/95/EC, and RoHS

Directive 2002/95/EC.

EMC Directive 2004/108/EC as attested by conformity with the following harmonized standards:

-. EN55022:1998 + A1:2000 + A2:2006, AS/NZS CISPR22:2006, Class B

-. EN55024:1998 + A1:2001 + A2:2003

-. EN61000-3-2:2006 Class D

-. EN61000-3-3:1995 + A1:2001+A2:2005

Notice: Shielded cables

All connections to other computing devices must be made using shielded cables to maintain compliance

with EMC regulations.

Notice: Peripheral devices

Only peripherals (input/output devices, terminals, printers, etc.) certified to comply with the Class B limits

may be attached to this equipment. Operation with non-certified peripherals is likely to result in

interference to radio and TV reception.

Caution

Changes or modifications not expressly approved by the manufacturer could void the user authority, which

is granted by the Federal Communications Commission, to operate this product.

Operation conditions

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)

this device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.!

Notice: Canadian users

This Class B digital apparatus complies with Canadian ICES-003.!Remarque a I'intention des utilisateurs

canadiens Cet appareil numerique de la classe B est conforme a la norme NMB-003 du Canada.

Lamp disposal

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED

OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT

THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFIC DISPOSAL

INFORMATION CHECK WWW.LAMPRECYCLE.ORG.

Disposal of waste equipment by user in private household in the European Union

This symbol on the product or on its packaging indicates that this product must not be

disposed of with your other household waste. Instead, it is your responsibility to

dispose of your waste equipment by handing it over it a designated collection point

for the recycling of waste electrical and electronic equipment.!The separate collection

and recycling of your waste equipment at the time of disposal will help to conserve

natural resources and ensure that it is recycled in a manner that protects human

health and the environment. For more information abut where you can drop off your

waste equipment for recycling, please contact your local city office, your household

waste disposal service or the shop where you purchased the product.

,

English

SPECIFICATION

Driving system TFT Color LCD

Size

Pixel pitch

Brightness 300cd/m

2

(Typical)

Viewable angle 160° (H) 160° (V) (CR=10)

LCD Panel

Panel Type TN

Video R, G, B Analog Interface

H-Frequency

54.2KHz – 83.8KHz

V-Frequency 49-75 Hz

Display Colors

16.7M Colorsΰ6bit+Hi-FRCα

Dot Clock

Max. Resolution

Plug & Play VESA DDCCI/DDC2B

ENERGY STAR

D-Sub

DVI-D 24pin (Only Dual-Input Model)

Input Connector

HDMI 19pin (Only HDMI-Input Model)

Analog:0.7Vp-p(standard), 75 OHM, Positive

Digital signal

Input Video Signal

HDMI signal

Maximum Screen Size

Power Source

Environmental

Considerations

Operating Temp: 0° to 40°C

Storage Temp: -20° to 60°C

Operating Humidity: 20% to 85%

MTBF 50000 hrs

Dimensions

Weight (N. W.)

Mechanism spec

Tilt: - 5° to +15°

Swivel: No

Height adjustment: No

Pivot: No

Detachable foot stand: Yes (by Release button)

Switch/Buttons

Power Button

MENU/ENTER

Auto/ Exit

External

Controls:

Functions

* All specifications are subject to change without notice.

ADM (Acer_eDisplay_Management)

Regarding the features and operation instructions, please refer to the "Help" section in the ADM software

on the CD Manual (Windows 98SE/ME/NT 4.0/2000/XP/Vista).

Response time

100~240VAC, 50/60Hz

23"W

0.265mm(H) x 0.265mm(V)

165MHz

1920 x 1080 @60Hz

Horizontal:509.76mm / Vertical: 286.74 mm

E(Empowering) Key

Input

Key

569.9(W) x 409.55(H) x 180(D) mm

Contrast 100000:1 Max (ACM)

7

English

On Mode

(typ.) Sleep Mode

OFF/Standby Mode

/176° (H) 176° (V) (CR=5)

5.12 kg Unit (net)

Contrast

Brightness

Focus

Clock

(Warm) Color

(Cool) Color

RGB Color temperature

Language

timeout

Auto configuration

Wide mode (Full/Aspect)

ACM On/Off

Input signal Selection

DDCCI On/Off

Display information

Reset

Exit

2 ms

34 W (typ.)

1.2 W

0.9 W (typ.)

Page is loading ...

"A certified power supply cord has to be used with this equipment. The relevant national installation

and/or equipment regulations shall be considered. A certified power supply cord not lighter than

ordinary polyvinyl chloride flexible cord according to IEC 60227 (designation H05VV-F 3G 0.75mm

2

or

H05VVH2-F2 3G 0.75mm

2

) shall be used. Alternative a flexible cord be of synthetic rubber according to

IEC 60245 (designation H05RR-F 3G 0.75mm

2

) shall be used."

HINWEIS

Zum Netzanschluß dieses Gerätes ist eine geprüfte Leitung zu verwenden. Es sind die zutreffenden

nationalen Errichtungs- und/oder Gerätebestimmungen zu beachten. Es ist eine geprüfte flexible

PVC-ummantelte Leitung entsprechend IEC 60227 (H05VV-F 3G 0.75mm

2

oder H05VVH2-F 3G 0.75mm

2

)

zu verwenden. Andernfalls ist eine flexible Leitung aus systhetischem Gummi entsprechend IEC60245

(Bauartkurzzeichen H05RR-F 3G 0.75mm

2

) zu verwenden.

FCC DECLARATION OF CONFORMITY

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)

This device may not cause harmful interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

This device has been tested and found to comply with the limits for Class B personal Computers and

peripherals, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable

protection against harmful interference when the device is operated in a residential environment. This

device generates, may cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If you determine the device does

cause harmful interference to radio or television reception (this may be determined by monitoring the

interference while turning the device off and on), you are encouraged to try to correct the interference

by one of the following measures:

图 Reorient or relocate the receiving antenna.

图 Increase the separation between the device and receiver.

图 Connect the device into an outlet on a circuit different from that to which the receiver is connected.

图 Consult the dealer or an experienced radio or TV technician for help.

To meet the FCC requirements, you should use a signal cable with ferrite core at both ends.

CAUTION: Changes or modifications not expressly approved by CHI MEI OPTOELECTRONICS CORP.

could void the users authority to operate the device under FCC compliance regulations.

CANADIAN DEPARTMENT OF COMMUNICATIONS COMPLIANCE STATEMENT

This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus

as set out in the radio interference regulation of the Canadian department of communications.

CE MARKING DECLARATION OF CONFORMITY

This LCD monitor complies with the requirements of the EC Directive 89/336/EEC “EMC Directive” and

72/23/EEC “Low Voltage Directive” as amended by Directive 96/68/EEC.

The electro-magnetic susceptibility has been chosen at a level that gives correct operation in residential

areas, business and light industrial premises and small-scale enterprises, inside as well as outside of the

buildings.

All places of operation are characterized by their connection to the public low voltage power supply

system.

图 We reserve the right to change specifications without notice.

图 All trademarks used in this user manual are the property of their respective owners.

图 As an ENERGY STAR

®

Partner, CHI MEI OPTOELECTRONICS CORP. has determined that this product

meets the ENERGY STAR

®

guidelines for energy efficiency.

图 This manual is printed on recycled paper.

This LCD Monitor has already approved by such safety certifications as below, and you

should use it according to the user manual, please.

7

Acer H235H Quick start guide

Acer H235H Quick start guide

in other languages

Related papers

Other documents