2. Danfoss
  3. 148B3863
148B3863

Danfoss 148B3863 Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Danfoss 148B3863 Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Installation guide – Spare parts and accessories
© Danfoss A/S (MWA), 2015-03 DKRCI.PI.KO0.A1.02 / 520H9717 / 148R9630 1
STC - DN 15 - 40 STC - DN 50 - 150
4b
Danfoss
148B313
4a
Danfoss
148B312
4b
Packing gland
DN 15-25
Packing gland
DN 32-40
Packing gland
DN 15-150
Packing gland identication and replacement
Shut-o valves, STC 15-150 (½-6 in.)
4a 4b
Please note:
If you have any questions please do not hesitate to contact your local Danfoss sales oce.
The drawings shown in this document are only for illustrative and do not show the actual size of the products.
Packing gland identication and replacement - Shut-o valves, STC 15-150 (½-6 in.)
© Danfoss A/S (MWA), 2015-03 DKRCI.PI.KO0.A1.02 / 520H9717 / 148R9630 2
DN 15-40
Switching to
packing gland 4a
1. Remove the packing gland and alu gasket
from the bonnet (use hook) or steel wire.
2. Replace the packing gland
(see identication details to the right).
3. Assemble according to these torque details:
Old / Existing
packing gland
NEW
packing gland 4a
DN 15-25
DN 32-40
Nm LB-feet
DN 15-25 40 29.5
DN 32-40 60 45
DN 50-150
Switching to
packing gland 4b
1. Remove the packing gland and alu gasket
from the bonnet (use hook or steel wire).
2. Replace the packing gland
(see identication details to the right).
3. Assemble according to these torque details:
Old / Existing
packing gland
NEW
packing gland 4b
Nm LB-feet
DN 50-65 50 37
DN 80-100 50 37
DN 125-150 120 88.5
DN 15-40
Adding a teon bush to
packing gland 4a
1. Remove the threaded part and iron bush from
the bonnet.
2. Add one piece of at Teon bush.
3. Mount the packing gland.
4. Assemble according to these torque details:
Packing gland 4a
BEFORE
Packing gland 4a
AFTER
Flat Teon bush
Nm LB-feet
DN 15-25 40 29.5
DN 32-40 60 45
DN 15-150
Adding a teon bush to
packing gland 4b
1. Remove the threaded part from the bonnet.
2. Add one piece of at Teon bush.
3. Mount the packing gland.
4. Assemble according to these torque details:
Packing gland 4b
BEFORE
Packing gland 4b
AFTER
Flat Teon bush
Nm LB-feet
DN 15-25 25 18.4
DN 32-40 40 29.5
DN 50-65 50 37
DN 80-100 50 37
DN 125-150 120 88.5
Threaded part
Threaded part
Iron bush
/